patch-1.3.22 linux/drivers/net/3c503.c
Next file: linux/drivers/net/3c505.c
Previous file: linux/drivers/char/tpqic02.c
Back to the patch index
Back to the overall index
- Lines: 38
- Date:
Tue Aug 29 10:15:52 1995
- Orig file:
v1.3.21/linux/drivers/net/3c503.c
- Orig date:
Tue Aug 15 20:39:02 1995
diff -u --recursive --new-file v1.3.21/linux/drivers/net/3c503.c linux/drivers/net/3c503.c
@@ -95,7 +95,7 @@
for (addr = addrs; *addr; addr++) {
int i;
- unsigned int base_bits = *(unsigned char *)*addr;
+ unsigned int base_bits = readb(*addr);
/* Find first set bit. */
for(i = 7; i >= 0; i--, base_bits >>= 1)
if (base_bits & 0x1)
@@ -221,19 +221,19 @@
#ifdef EL2MEMTEST
/* This has never found an error, but someone might care. */
{ /* Check the card's memory. */
- int *mem_base = (int *)dev->mem_start;
- int memtest_value = 0xbbadf00d;
- mem_base[0] = 0xba5eba5e;
- for (i = 1; i < EL2_MEMSIZE/sizeof(mem_base[0]); i++) {
- mem_base[i] = memtest_value;
- if (mem_base[0] != 0xba5eba5e
- || mem_base[i] != memtest_value) {
+ unsigned long mem_base = dev->mem_start;
+ unsigned int test_val = 0xbbadf00d;
+ writel(0xba5eba5e, mem_base);
+ for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
+ writel(test_val, mem_base + i);
+ if (readl(mem_base) != 0xba5eba5e
+ || readl(mem_base + i) != test_val) {
printk(" memory failure or memory address conflict.\n");
dev->mem_start = 0;
break;
}
- memtest_value += 0x55555555;
- mem_base[i] = 0;
+ test_val += 0x55555555;
+ writel(0, mem_base + i);
}
}
#endif /* EL2MEMTEST */
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]
with Sam's (original) version of this