patch-1.3.24 linux/arch/i386/config.in

• Lines: 323
• Date: Tue Sep 5 10:25:36 1995
• Orig file: v1.3.23/linux/arch/i386/config.in
• Orig date: Sun Sep 3 12:26:49 1995

diff -u --recursive --new-file v1.3.23/linux/arch/i386/config.in linux/arch/i386/config.in
@@ -6,7 +6,7 @@
 comment 'General setup'
 
 bool 'Kernel math emulation' CONFIG_MATH_EMULATION n
-bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD y
+tristate 'Normal floppy disk support' CONFIG_BLK_DEV_FD y
 bool 'Normal (MFM/RLL) disk and IDE disk/cdrom support' CONFIG_ST506 y
 if [ "$CONFIG_ST506" = "y" ]; then
   comment 'Please see drivers/block/README.ide for help/info on IDE drives'
@@ -32,7 +32,7 @@
   fi
 fi
 bool 'System V IPC' CONFIG_SYSVIPC y
-bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF y
+tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF y
 if [ "$CONFIG_BINFMT_ELF" = "y" ]; then
 bool 'Compile kernel as ELF - if your GCC is ELF-GCC' CONFIG_KERNEL_ELF n
 fi
@@ -52,7 +52,7 @@
 bool 'IP: multicasting' CONFIG_IP_MULTICAST n
 bool 'IP: firewalling' CONFIG_IP_FIREWALL n
 bool 'IP: accounting' CONFIG_IP_ACCT n
-bool 'IP: tunneling' CONFIG_NET_IPIP n
+tristate 'IP: tunneling' CONFIG_NET_IPIP n
 if [ "$CONFIG_IP_FORWARD" = "y" -a "$CONFIG_IP_FIREWALL" = "y" ]; then
   bool 'IP: firewall packet logging' CONFIG_IP_FIREWALL_VERBOSE y
   bool 'IP: masquerading (ALPHA)' CONFIG_IP_MASQUERADE n
@@ -62,7 +62,7 @@
 fi
 comment '(it is safe to leave these untouched)'
 bool 'IP: PC/TCP compatibility mode' CONFIG_INET_PCTCP n
-bool 'IP: Reverse ARP' CONFIG_INET_RARP n
+tristate 'IP: Reverse ARP' CONFIG_INET_RARP n
 bool 'IP: Assume subnets are local' CONFIG_INET_SNARL y
 bool 'IP: Disable NAGLE algorithm (normally enabled)' CONFIG_TCP_NAGLE_OFF n
 bool 'IP: Drop source routed frames' CONFIG_IP_NOSR y
@@ -88,10 +88,10 @@
 
 comment 'SCSI support type (disk, tape, CDrom)'
 
-bool 'SCSI disk support' CONFIG_BLK_DEV_SD y
-bool 'SCSI tape support' CONFIG_CHR_DEV_ST n
-bool 'SCSI CDROM support' CONFIG_BLK_DEV_SR y
-bool 'SCSI generic support' CONFIG_CHR_DEV_SG n
+tristate 'SCSI disk support' CONFIG_BLK_DEV_SD y
+tristate 'SCSI tape support' CONFIG_CHR_DEV_ST n
+tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR y
+tristate 'SCSI generic support' CONFIG_CHR_DEV_SG n
 
 comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
 
@@ -99,28 +99,28 @@
 
 comment 'SCSI low-level drivers'
 
-bool 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X y
-bool 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 n
-bool 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 n
-bool 'Adaptec AHA274X/284X/294X support' CONFIG_SCSI_AIC7XXX n
-bool 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC n
-bool 'EATA-DMA (DPT, NEC, ATT, Olivetti) support' CONFIG_SCSI_EATA_DMA n
-bool 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO n
-bool 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F n
-bool 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN n
+tristate 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X y
+tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 n
+tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 n
+tristate 'Adaptec AHA274X/284X/294X support' CONFIG_SCSI_AIC7XXX n
+tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC n
+tristate 'EATA-DMA (DPT, NEC, ATT, Olivetti) support' CONFIG_SCSI_EATA_DMA n
+tristate 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO n
+tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F n
+tristate 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN n
 bool 'Generic NCR5380 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 n
 if [ "$CONFIG_PCI" = "y" ]; then
-  bool 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx n
+  tristate 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx n
 fi
-bool 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 n
+tristate 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 n
 bool 'PAS16 SCSI support' CONFIG_SCSI_PAS16 n
-bool 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC n
-bool 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE n
+tristate 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC n
+tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE n
 bool 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 n
-bool 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR n
-bool '7000FASST SCSI support' CONFIG_SCSI_7000FASST n
-bool 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA n
-#bool 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG n
+tristate 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR n
+tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST n
+tristate 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA n
+#tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG n
 fi
 
 
@@ -134,13 +134,13 @@
 comment 'Skipping network driver configuration options...'
 
 else
-bool 'Dummy net driver support' CONFIG_DUMMY y
-bool 'SLIP (serial line) support' CONFIG_SLIP n
-if [ "$CONFIG_SLIP" = "y" ]; then
+tristate 'Dummy net driver support' CONFIG_DUMMY y
+tristate 'SLIP (serial line) support' CONFIG_SLIP n
+if [ "$CONFIG_SLIP" != "n" ]; then
   bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED y
 fi
-bool 'PPP (point-to-point) support' CONFIG_PPP n
-if [ "$CONFIG_PPP" = "y" ]; then
+tristate 'PPP (point-to-point) support' CONFIG_PPP n
+if [ "$CONFIG_PPP" != "n" ]; then
   bool ' 16 channels instead of 4' CONFIG_PPP_LOTS n
 fi
 if [ "$CONFIG_AX25" = "y" ]; then
@@ -148,57 +148,57 @@
 else
 	bool 'Z8530 SCC kiss emulation driver for AX.25' CONFIG_SCC n
 fi
-bool 'PLIP (parallel port) support' CONFIG_PLIP n
-bool 'EQL (serial line load balancing) support' CONFIG_EQUALIZER n
+tristate 'PLIP (parallel port) support' CONFIG_PLIP n
+tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER n
 bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA n
 bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC n
 if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
-	bool 'WD80*3 support' CONFIG_WD80x3 n
-	bool 'SMC Ultra support' CONFIG_ULTRA n
+	tristate 'WD80*3 support' CONFIG_WD80x3 n
+	tristate 'SMC Ultra support' CONFIG_ULTRA n
 fi
 bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE n
 bool '3COM cards' CONFIG_NET_VENDOR_3COM y
 if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
-	bool '3c501 support' CONFIG_EL1 n
-	bool '3c503 support' CONFIG_EL2 n
+	tristate '3c501 support' CONFIG_EL1 n
+	tristate '3c503 support' CONFIG_EL2 n
 	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool '3c505 support' CONFIG_ELPLUS n
-		bool '3c507 support' CONFIG_EL16 n
+		tristate '3c505 support' CONFIG_ELPLUS n
+		tristate '3c507 support' CONFIG_EL16 n
 	fi
-	bool '3c509/3c579 support' CONFIG_EL3 y
+	tristate '3c509/3c579 support' CONFIG_EL3 y
 fi
 bool 'Other ISA cards' CONFIG_NET_ISA n
 if [ "$CONFIG_NET_ISA" = "y" ]; then
-	bool 'Arcnet support' CONFIG_ARCNET n
-	bool 'Cabletron E21xx support' CONFIG_E2100 n
-	bool 'DEPCA support' CONFIG_DEPCA n
-	bool 'EtherWorks 3 support' CONFIG_EWRK3 n
+	tristate 'Arcnet support' CONFIG_ARCNET n
+	tristate 'Cabletron E21xx support' CONFIG_E2100 n
+	tristate 'DEPCA support' CONFIG_DEPCA n
+	tristate 'EtherWorks 3 support' CONFIG_EWRK3 n
 	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
 		bool 'SEEQ8005 support' CONFIG_SEEQ8005 n
-		bool 'AT1700 support' CONFIG_AT1700 n
-		bool 'EtherExpressPro support' CONFIG_EEXPRESS_PRO n
-		bool 'EtherExpress support' CONFIG_EEXPRESS n
+		tristate 'AT1700 support' CONFIG_AT1700 n
+		tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO n
+		tristate 'EtherExpress support' CONFIG_EEXPRESS n
 		bool 'NI5210 support' CONFIG_NI52 n
 		bool 'NI6510 support' CONFIG_NI65 n
 		if [ "$CONFIG_AX25" = "y" ]; then
 			bool 'Ottawa PI and PI/2 support' CONFIG_PI y
 		fi
-		bool 'WaveLAN support' CONFIG_WAVELAN n
+		tristate 'WaveLAN support' CONFIG_WAVELAN n
 	fi
-	bool 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS n
-	bool 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN n
-	bool 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 y
-	bool 'NE2000/NE1000 support' CONFIG_NE2000 y
+	tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS n
+	tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN n
+	tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 y
+	tristate 'NE2000/NE1000 support' CONFIG_NE2000 y
 	bool 'SK_G16 support' CONFIG_SK_G16 n
 fi
 bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA n
 if [ "$CONFIG_NET_EISA" = "y" ]; then
 	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
+		tristate 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
 	fi
-	bool 'Apricot Xen-II on board ethernet' CONFIG_APRICOT n
-	bool 'DE425, DE434, DE435, DE500 support' CONFIG_DE4X5 n
-#	bool 'DEC 21040 PCI support' CONFIG_DEC_ELCP n
+	tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT n
+	tristate 'DE425, DE434, DE435, DE500 support' CONFIG_DE4X5 n
+#	tristate 'DEC 21040 PCI support' CONFIG_DEC_ELCP n
 #	bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100 n
 #	bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32 n
 	bool 'Zenith Z-Note support' CONFIG_ZNET y
@@ -206,26 +206,26 @@
 bool 'Pocket and portable adaptors' CONFIG_NET_POCKET n
 if [ "$CONFIG_NET_POCKET" = "y" ]; then
 	bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n
-	bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
-	bool 'D-Link DE620 pocket adaptor support' CONFIG_DE620 n
+	tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
+	tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620 n
 #	bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA n
 #	bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN n
 #	bool '3 Com 3c589 PCMCIA support' CONFIG_3C589 n
 fi
 bool 'Token Ring driver support' CONFIG_TR n
 if [ "$CONFIG_TR" = "y" ]; then
-	bool 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR y
+	tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR y
 fi
 fi
 fi
 
 comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
 
-bool 'Sony CDU31A/CDU33A CDROM support' CONFIG_CDU31A n
-bool 'Standard Mitsumi [no XA/Multisession] CDROM support' CONFIG_MCD n
-bool 'Experimental Mitsumi [XA/MultiSession] support' CONFIG_MCDX n
-bool 'Matsushita/Panasonic CDROM support' CONFIG_SBPCD n
-if [ "$CONFIG_SBPCD" = "y" ]; then
+tristate 'Sony CDU31A/CDU33A CDROM support' CONFIG_CDU31A n
+tristate 'Standard Mitsumi [no XA/Multisession] CDROM support' CONFIG_MCD n
+tristate 'Experimental Mitsumi [XA/MultiSession] support' CONFIG_MCDX n
+tristate 'Matsushita/Panasonic CDROM support' CONFIG_SBPCD n
+if [ "$CONFIG_SBPCD" != "n" ]; then
   bool 'Matsushita/Panasonic second CDROM controller support' CONFIG_SBPCD2 n
   if [ "$CONFIG_SBPCD2" = "y" ]; then
     bool 'Matsushita/Panasonic third CDROM controller support' CONFIG_SBPCD3 n
@@ -234,44 +234,40 @@
     fi
   fi
 fi
-bool 'Aztech/Orchid/Okano/Wearnes (non IDE) CDROM support' CONFIG_AZTCD n
-bool 'Sony CDU535 CDROM support' CONFIG_CDU535 n
-bool 'Goldstar R420 CDROM support' CONFIG_GSCD n
-bool 'Philips/LMS CM206 CDROM support' CONFIG_CM206 n
-bool 'Experimental Optics Storage DOLPHIN 8000AT CDROM support' CONFIG_OPTCD n
+tristate 'Aztech/Orchid/Okano/Wearnes (non IDE) CDROM support' CONFIG_AZTCD n
+tristate 'Sony CDU535 CDROM support' CONFIG_CDU535 n
+tristate 'Goldstar R420 CDROM support' CONFIG_GSCD n
+tristate 'Philips/LMS CM206 CDROM support' CONFIG_CM206 n
+tristate 'Experimental Optics Storage DOLPHIN 8000AT CDROM support' CONFIG_OPTCD n
 bool 'Experimental Sanyo H94A CDROM support' CONFIG_SJCD n
 
 comment 'Filesystems'
 
-bool 'Standard (minix) fs support' CONFIG_MINIX_FS y
+tristate 'Standard (minix) fs support' CONFIG_MINIX_FS y
 bool 'Extended fs support' CONFIG_EXT_FS n
 bool 'Second extended fs support' CONFIG_EXT2_FS y
-bool 'xiafs filesystem support' CONFIG_XIA_FS n
-bool 'msdos fs support' CONFIG_MSDOS_FS y
-if [ "$CONFIG_MSDOS_FS" = "y" ]; then
-bool 'umsdos: Unix like fs on top of std MSDOS FAT fs' CONFIG_UMSDOS_FS n
+tristate 'xiafs filesystem support' CONFIG_XIA_FS n
+tristate 'msdos fs support' CONFIG_MSDOS_FS y
+if [ "$CONFIG_MSDOS_FS" != "n" ]; then
+  tristate 'umsdos: Unix like fs on top of std MSDOS FAT fs' CONFIG_UMSDOS_FS n
 fi
 bool '/proc filesystem support' CONFIG_PROC_FS y
 if [ "$CONFIG_INET" = "y" ]; then
-bool 'NFS filesystem support' CONFIG_NFS_FS y
+  tristate 'NFS filesystem support' CONFIG_NFS_FS y
 fi
-if [ "$CONFIG_BLK_DEV_SR" = "y" -o "$CONFIG_BLK_DEV_IDECD" = "y" -o "$CONFIG_CDU31A" = "y" -o "$CONFIG_MCDX" = "y" -o "$CONFIG_MCD" = "y" -o "$CONFIG_SBPCD" = "y" -o "$CONFIG_AZTCD" = "y" -o "$CONFIG_CDU535" = "y" -o "$CONFIG_GSCD" = "y" -o "$CONFIG_CM206" = "y" -o "$CONFIG_OPTCD" = "y" -o "$CONFIG_SJCD" = "y" ]; then
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
-else
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n
-fi
-bool 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n
-bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS n
-bool 'SMB filesystem (to mount WfW shares etc..) support' CONFIG_SMB_FS n
+tristate 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
+tristate 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n
+tristate 'System V and Coherent filesystem support' CONFIG_SYSV_FS n
+tristate 'SMB filesystem (to mount WfW shares etc..) support' CONFIG_SMB_FS n
 
 comment 'character devices'
 
 bool 'Cyclades async mux support' CONFIG_CYCLADES n
-bool 'Parallel printer support' CONFIG_PRINTER n
+tristate 'Parallel printer support' CONFIG_PRINTER n
 bool 'Logitech busmouse support' CONFIG_BUSMOUSE n
 bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE n
 if [ "$CONFIG_PSMOUSE" = "y" ]; then
-bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE y
+  bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE y
 fi
 bool 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE n
 bool 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE n
@@ -279,7 +275,7 @@
 
 bool 'QIC-02 tape support' CONFIG_QIC02_TAPE n
 if [ "$CONFIG_QIC02_TAPE" = "y" ]; then
-bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF y
+  bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF y
 if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
 
 comment '>>> Edit configuration parameters in ./include/linux/tpqic02.h!'
@@ -294,7 +290,7 @@
 
 bool 'QIC-117 tape support' CONFIG_FTAPE n
 if [ "$CONFIG_FTAPE" = "y" ]; then
-int ' number of ftape buffers' NR_FTAPE_BUFFERS 3
+  int ' number of ftape buffers' NR_FTAPE_BUFFERS 3
 fi
 
 comment 'Sound'
@@ -304,7 +300,7 @@
 comment 'Kernel hacking'
 
 #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
-bool 'Kernel profiling support' CONFIG_PROFILE y
+bool 'Kernel profiling support' CONFIG_PROFILE n
 if [ "$CONFIG_PROFILE" = "y" ]; then
   int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
 fi