patch-1.3.30 linux/drivers/scsi/NCR53c406a.c
Next file: linux/drivers/scsi/NCR53c406a.h
Previous file: linux/drivers/scsi/Makefile
Back to the patch index
Back to the overall index
- Lines: 1066
- Date:
Wed Sep 27 12:39:41 1995
- Orig file:
v1.3.29/linux/drivers/scsi/NCR53c406a.c
- Orig date:
Thu Jan 1 02:00:00 1970
diff -u --recursive --new-file v1.3.29/linux/drivers/scsi/NCR53c406a.c linux/drivers/scsi/NCR53c406a.c
@@ -0,0 +1,1065 @@
+/*
+ * NCR53c406.c
+ * Low-level SCSI driver for NCR53c406a chip.
+ * Copyright (C) 1994, 1995 Normunds Saumanis ([email protected])
+ *
+ * LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
+ * Specify IRQ = 0 for non-interrupt driven mode.
+ * FASTPIO = 1 for fast pio mode, 0 for slow mode.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#define NCR53C406A_DEBUG 0
+#define VERBOSE_NCR53C406A_DEBUG 0
+
+/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
+#define USE_PIO 1
+
+#define USE_BIOS 0
+/* #define BIOS_ADDR 0xD8000 */ /* define this if autoprobe fails */
+/* #define PORT_BASE 0x330 */ /* define this if autoprobe fails */
+/* #define IRQ_LEV 0 */ /* define this if autoprobe fails */
+#define DMA_CHAN 5 /* this is ignored if DMA is disabled */
+
+/* Set this to 0 if you encounter kernel lockups while transferring
+ * data in PIO mode */
+#define USE_FAST_PIO 1
+
+/* ============= End of user configurable parameters ============= */
+
+#ifdef MODULE
+#include <linux/config.h>
+#include <linux/module.h>
+#endif
+
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/bitops.h>
+#include <asm/irq.h>
+
+#include "../block/blk.h"
+#include "scsi.h"
+#include "hosts.h"
+#include "sd.h"
+
+#include "NCR53c406a.h"
+
+/* ============================================================= */
+
+#define WATCHDOG 5000000
+
+#define SYNC_MODE 0 /* Synchrounous transfer mode */
+
+#if DEBUG
+#undef NCR53C406A_DEBUG
+#define NCR53C406A_DEBUG 1
+#endif
+
+#if USE_PIO
+#define USE_DMA 0
+#else
+#define USE_DMA 1
+#endif
+
+/* Default configuration */
+#define C1_IMG 0x07 /* ID=7 */
+#define C2_IMG 0x48 /* FE SCSI2 */
+#if USE_DMA
+#define C3_IMG 0x21 /* CDB TE */
+#else
+#define C3_IMG 0x20 /* CDB */
+#endif
+#define C4_IMG 0x04 /* ANE */
+#define C5_IMG 0xb6 /* AA PI SIE POL */
+
+#define REG0 (outb(C4_IMG, CONFIG4))
+#define REG1 (outb(C5_IMG, CONFIG5))
+
+#if NCR53C406A_DEBUG
+#define DEB(x) x
+#else
+#define DEB(x)
+#endif
+
+#if VERBOSE_NCR53C406A_DEBUG
+#define VDEB(x) x
+#else
+#define VDEB(x)
+#endif
+
+#define LOAD_DMA_COUNT(count) \
+ outb(count & 0xff, TC_LSB); \
+ outb((count >> 8) & 0xff, TC_MSB); \
+ outb((count >> 16) & 0xff, TC_HIGH);
+
+/* Chip commands */
+#define DMA_OP 0x80
+
+#define SCSI_NOP 0x00
+#define FLUSH_FIFO 0x01
+#define CHIP_RESET 0x02
+#define SCSI_RESET 0x03
+#define RESELECT 0x40
+#define SELECT_NO_ATN 0x41
+#define SELECT_ATN 0x42
+#define SELECT_ATN_STOP 0x43
+#define ENABLE_SEL 0x44
+#define DISABLE_SEL 0x45
+#define SELECT_ATN3 0x46
+#define RESELECT3 0x47
+#define TRANSFER_INFO 0x10
+#define INIT_CMD_COMPLETE 0x11
+#define MSG_ACCEPT 0x12
+#define TRANSFER_PAD 0x18
+#define SET_ATN 0x1a
+#define RESET_ATN 0x1b
+#define SEND_MSG 0x20
+#define SEND_STATUS 0x21
+#define SEND_DATA 0x22
+#define DISCONN_SEQ 0x23
+#define TERMINATE_SEQ 0x24
+#define TARG_CMD_COMPLETE 0x25
+#define DISCONN 0x27
+#define RECV_MSG 0x28
+#define RECV_CMD 0x29
+#define RECV_DATA 0x2a
+#define RECV_CMD_SEQ 0x2b
+#define TARGET_ABORT_DMA 0x04
+
+/*----------------------------------------------------------------*/
+/* the following will set the monitor border color (useful to find
+ where something crashed or gets stuck at */
+/* 1 = blue
+ 2 = green
+ 3 = cyan
+ 4 = red
+ 5 = magenta
+ 6 = yellow
+ 7 = white
+*/
+
+#if NCR53C406A_DEBUG
+#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
+#else
+#define rtrc(i) {}
+#endif
+/*----------------------------------------------------------------*/
+
+enum Phase {
+ idle,
+ data_out,
+ data_in,
+ command_ph,
+ status_ph,
+ message_out,
+ message_in
+};
+
+/* Static function prototypes */
+static void NCR53c406a_intr(int, struct pt_regs *);
+static void internal_done(Scsi_Cmnd *);
+static void wait_intr(void);
+static void chip_init(void);
+static void calc_port_addr(void);
+#ifndef IRQ_LEV
+static int irq_probe(void);
+#endif
+
+/* ================================================================= */
+
+#if USE_BIOS
+static void *bios_base = (void *)0;
+#endif
+
+#if PORT_BASE
+static int port_base = PORT_BASE;
+#else
+static int port_base = 0;
+#endif
+
+#if IRQ_LEV
+static int irq_level = IRQ_LEV;
+#else
+static int irq_level = -1; /* 0 is 'no irq', so use -1 for 'uninitialized'*/
+#endif
+
+#if USE_DMA
+static int dma_chan = 0;
+#endif
+
+#if USE_PIO
+static int fast_pio = USE_FAST_PIO;
+#endif
+
+static Scsi_Cmnd *current_SC = NULL;
+static volatile int internal_done_flag = 0;
+static volatile int internal_done_errcode = 0;
+static char info_msg[256];
+
+/* ================================================================= */
+
+/* possible BIOS locations */
+#if USE_BIOS
+static void *addresses[] = {
+ (void *)0xd8000,
+ (void *)0xc8000
+};
+#define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned ))
+#endif USE_BIOS
+
+/* possible i/o port addresses */
+static unsigned short ports[] = { 0x230, 0x330 };
+#define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short ))
+
+/* possible interrupt channels */
+static unsigned short intrs[] = { 10, 11, 12, 15 };
+#define INTR_COUNT (sizeof( intrs ) / sizeof( unsigned short ))
+
+/* signatures for NCR 53c406a based controllers */
+#if USE_BIOS
+struct signature {
+ char *signature;
+ int sig_offset;
+ int sig_length;
+} signatures[] = {
+ /* 1 2 3 4 5 6 */
+ /* 123456789012345678901234567890123456789012345678901234567890 */
+ { "Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82 },
+};
+#define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature ))
+#endif USE_BIOS
+
+/* ============================================================ */
+
+/* Control Register Set 0 */
+static int TC_LSB; /* transfer counter lsb */
+static int TC_MSB; /* transfer counter msb */
+static int SCSI_FIFO; /* scsi fifo register */
+static int CMD_REG; /* command register */
+static int STAT_REG; /* status register */
+static int DEST_ID; /* selection/reselection bus id */
+static int INT_REG; /* interrupt status register */
+static int SRTIMOUT; /* select/reselect timeout reg */
+static int SEQ_REG; /* sequence step register */
+static int SYNCPRD; /* synchronous transfer period */
+static int FIFO_FLAGS; /* indicates # of bytes in fifo */
+static int SYNCOFF; /* synchronous offset register */
+static int CONFIG1; /* configuration register */
+static int CLKCONV; /* clock conversion reg */
+/*static int TESTREG;*/ /* test mode register */
+static int CONFIG2; /* Configuration 2 Register */
+static int CONFIG3; /* Configuration 3 Register */
+static int CONFIG4; /* Configuration 4 Register */
+static int TC_HIGH; /* Transfer Counter High */
+/*static int FIFO_BOTTOM;*/ /* Reserve FIFO byte register */
+
+/* Control Register Set 1 */
+/*static int JUMPER_SENSE;*/ /* Jumper sense port reg (r/w) */
+/*static int SRAM_PTR;*/ /* SRAM address pointer reg (r/w) */
+/*static int SRAM_DATA;*/ /* SRAM data register (r/w) */
+static int PIO_FIFO; /* PIO FIFO registers (r/w) */
+/*static int PIO_FIFO1;*/ /* */
+/*static int PIO_FIFO2;*/ /* */
+/*static int PIO_FIFO3;*/ /* */
+static int PIO_STATUS; /* PIO status (r/w) */
+/*static int ATA_CMD;*/ /* ATA command/status reg (r/w) */
+/*static int ATA_ERR;*/ /* ATA features/error register (r/w)*/
+static int PIO_FLAG; /* PIO flag interrupt enable (r/w) */
+static int CONFIG5; /* Configuration 5 register (r/w) */
+/*static int SIGNATURE;*/ /* Signature Register (r) */
+/*static int CONFIG6;*/ /* Configuration 6 register (r) */
+
+/* ============================================================== */
+
+#if USE_DMA
+static __inline__ int
+NCR53c406a_dma_setup (unsigned char *ptr,
+ unsigned int count,
+ unsigned char mode) {
+ unsigned limit;
+ unsigned long flags = 0;
+
+ VDEB(printk("dma: before count=%d ", count));
+ if (dma_chan <=3) {
+ if (count > 65536)
+ count = 65536;
+ limit = 65536 - (((unsigned) ptr) & 0xFFFF);
+ } else {
+ if (count > (65536<<1))
+ count = (65536<<1);
+ limit = (65536<<1) - (((unsigned) ptr) & 0x1FFFF);
+ }
+
+ if (count > limit) count = limit;
+
+ VDEB(printk("after count=%d\n", count));
+ if ((count & 1) || (((unsigned) ptr) & 1))
+ panic ("NCR53c406a: attempted unaligned DMA transfer\n");
+
+ save_flags(flags);
+ cli();
+ disable_dma(dma_chan);
+ clear_dma_ff(dma_chan);
+ set_dma_addr(dma_chan, (long) ptr);
+ set_dma_count(dma_chan, count);
+ set_dma_mode(dma_chan, mode);
+ enable_dma(dma_chan);
+ restore_flags(flags);
+
+ return count;
+}
+
+static __inline__ int
+NCR53c406a_dma_write(unsigned char *src, unsigned int count) {
+ return NCR53c406a_dma_setup (src, count, DMA_MODE_WRITE);
+}
+
+static __inline__ int
+NCR53c406a_dma_read(unsigned char *src, unsigned int count) {
+ return NCR53c406a_dma_setup (src, count, DMA_MODE_READ);
+}
+
+static __inline__ int
+NCR53c406a_dma_residual (void) {
+ register int tmp;
+ unsigned long flags = 0;
+ save_flags(flags);
+ cli();
+ clear_dma_ff(dma_chan);
+ tmp = get_dma_residue(dma_chan);
+ restore_flags(flags);
+
+ return tmp;
+}
+#endif USE_DMA
+
+#if USE_PIO
+static __inline__ int NCR53c406a_pio_read(unsigned char *request,
+ unsigned int reqlen)
+{
+ int i;
+ int len; /* current scsi fifo size */
+ unsigned long flags = 0;
+
+ REG1;
+ while (reqlen) {
+ i = inb(PIO_STATUS);
+/* VDEB(printk("pio_status=%x\n", i)); */
+ if (i & 0x80)
+ return 0;
+
+ switch( i & 0x1e ) {
+ default:
+ case 0x10:
+ len=0; break;
+ case 0x0:
+ len=1; break;
+ case 0x8:
+ len=42; break;
+ case 0xc:
+ len=84; break;
+ case 0xe:
+ len=128; break;
+ }
+
+ if ((i & 0x40) && len == 0) { /* fifo empty and interrupt occured */
+ return 0;
+ }
+
+ if (len) {
+ if( len > reqlen )
+ len = reqlen;
+
+ save_flags(flags);
+ cli();
+ if( fast_pio && len > 3 ) {
+ insl(PIO_FIFO,request,len>>2);
+ request += len & 0xfc;
+ reqlen -= len & 0xfc;
+ }
+ else {
+ while(len--) {
+ *request++ = inb(PIO_FIFO);
+ reqlen--;
+ }
+ }
+ restore_flags(flags);
+ }
+ }
+ return 0;
+}
+
+static __inline__ int NCR53c406a_pio_write(unsigned char *request,
+ unsigned int reqlen)
+{
+ int i = 0;
+ int len; /* current scsi fifo size */
+ unsigned long flags = 0;
+
+ REG1;
+ while (reqlen && !(i&0x40)) {
+ i = inb(PIO_STATUS);
+/* VDEB(printk("pio_status=%x\n", i)); */
+ if (i & 0x80) /* error */
+ return 0;
+
+ switch( i & 0x1e ) {
+ case 0x10:
+ len=128; break;
+ case 0x0:
+ len=84; break;
+ case 0x8:
+ len=42; break;
+ case 0xc:
+ len=1; break;
+ default:
+ case 0xe:
+ len=0; break;
+ }
+
+ if (len) {
+ if( len > reqlen )
+ len = reqlen;
+
+ save_flags(flags);
+ cli();
+ if( fast_pio && len > 3 ) {
+ outsl(PIO_FIFO,request,len>>2);
+ request += len & 0xfc;
+ reqlen -= len & 0xfc;
+ }
+ else {
+ while(len--) {
+ outb(*request++, PIO_FIFO);
+ reqlen--;
+ }
+ }
+ restore_flags(flags);
+ }
+ }
+ return 0;
+}
+#endif USE_PIO
+
+int
+NCR53c406a_detect(Scsi_Host_Template * tpnt){
+ struct Scsi_Host *shpnt;
+#ifndef PORT_BASE
+ int i;
+#endif
+
+#if USE_BIOS
+ int ii, jj;
+ bios_base = 0;
+ /* look for a valid signature */
+ for( ii=0; ii < ADDRESS_COUNT && !bios_base; ii++)
+ for( jj=0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
+ if(!memcmp((void *) addresses[ii]+signatures[jj].sig_offset,
+ (void *) signatures[jj].signature,
+ (int) signatures[jj].sig_length))
+ bios_base=addresses[ii];
+
+ if(!bios_base){
+ printk("NCR53c406a: BIOS signature not found\n");
+ return 0;
+ }
+
+ DEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base););
+#endif USE_BIOS
+
+#ifdef PORT_BASE
+ if (check_region(port_base, 0x10)) /* ports already snatched */
+ port_base = 0;
+
+#else /* autodetect */
+ if (port_base) { /* LILO override */
+ if (check_region(port_base, 0x10))
+ port_base = 0;
+ }
+ else {
+ for(i=0; i<PORT_COUNT && !port_base; i++){
+ if(check_region(ports[i], 0x10)){
+ DEB(printk("NCR53c406a: port %x in use\n", ports[i]));
+ }
+ else {
+ VDEB(printk("NCR53c406a: port %x available\n", ports[i]));
+ outb(C5_IMG, ports[i] + 0x0d); /* reg set 1 */
+ if( (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7
+ && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7
+ && (inb(ports[i] + 0x0e) & 0xf8) == 0x58 ) {
+ VDEB(printk("NCR53c406a: Sig register valid\n"));
+ VDEB(printk("port_base=%x\n", port_base));
+ port_base = ports[i];
+ }
+ }
+ }
+ }
+#endif PORT_BASE
+
+ if(!port_base){ /* no ports found */
+ printk("NCR53c406a: no available ports found\n");
+ return 0;
+ }
+
+ DEB(printk("NCR53c406a detected\n"));
+
+ calc_port_addr();
+ chip_init();
+
+#ifndef IRQ_LEV
+ if (irq_level < 0) { /* LILO override if >= 0*/
+ irq_level=irq_probe();
+ if (irq_level < 0) { /* Trouble */
+ printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
+ return 0;
+ }
+ }
+#endif
+
+ DEB(printk("NCR53c406a: using port_base %x\n", port_base));
+ request_region(port_base, 0x10, "NCR53c406a");
+
+ if(irq_level > 0) {
+ if(request_irq(irq_level, NCR53c406a_intr, 0, "NCR53c406a")){
+ printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
+ return 0;
+ }
+ tpnt->can_queue = 1;
+ DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
+ }
+ else if (irq_level == 0) {
+ tpnt->can_queue = 0;
+ DEB(printk("NCR53c406a: No interrupts detected\n"));
+#if USE_DMA
+ printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
+ return 0;
+#endif USE_DMA
+ }
+ else {
+ DEB(printk("NCR53c406a: Shouldn't get here!\n"));
+ return 0;
+ }
+
+#if USE_DMA
+ dma_chan = DMA_CHAN;
+ if(request_dma(dma_chan, "NCR53c406a") != 0){
+ printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
+ return 0;
+ }
+
+ DEB(printk("Allocated DMA channel %d\n", dma_chan));
+#endif USE_DMA
+
+ tpnt->present = 1;
+
+ shpnt = scsi_register(tpnt, 0);
+ shpnt->irq = irq_level;
+ shpnt->io_port = port_base;
+ shpnt->n_io_port = 0x10;
+#if USE_DMA
+ shpnt->dma = dma_chan;
+#endif
+
+#if USE_DMA
+ sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
+#else
+ sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
+#endif
+
+ return (tpnt->present);
+}
+
+/* called from init/main.c */
+void NCR53c406a_setup(char *str, int *ints)
+{
+ static size_t setup_idx = 0;
+ size_t i;
+
+ DEB(printk("NCR53c406a: Setup called\n"););
+
+ if (setup_idx >= PORT_COUNT - 1) {
+ printk("NCR53c406a: Setup called too many times. Bad LILO params?\n");
+ return;
+ }
+ if (ints[0] < 1 || ints[0] > 3) {
+ printk("NCR53c406a: Malformed command line\n");
+ printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
+ return;
+ }
+ for (i = 0; i < PORT_COUNT && !port_base; i++)
+ if (ports[i] == ints[1]) {
+ port_base = ints[1];
+ DEB(printk("NCR53c406a: Specified port_base 0x%X\n", port_base);)
+ }
+ if (!port_base) {
+ printk("NCR53c406a: Invalid PORTBASE 0x%X specified\n", ints[1]);
+ return;
+ }
+
+ if (ints[0] > 1) {
+ if (ints[2] == 0) {
+ irq_level = 0;
+ DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);)
+ }
+ else
+ for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
+ if (intrs[i] == ints[2]) {
+ irq_level = ints[2];
+ DEB(printk("NCR53c406a: Specified irq %d\n", port_base);)
+ }
+ if (irq_level < 0)
+ printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
+ }
+
+ if (ints[0] > 2)
+ fast_pio = ints[3];
+
+ DEB(printk("NCR53c406a: port_base=0x%X, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
+}
+
+const char*
+NCR53c406a_info(struct Scsi_Host *SChost){
+ DEB(printk("NCR53c406a_info called\n"));
+ return (info_msg);
+}
+
+static void internal_done(Scsi_Cmnd *SCpnt) {
+ internal_done_errcode = SCpnt->result;
+ ++internal_done_flag;
+}
+
+
+static void wait_intr() {
+ int i = jiffies + WATCHDOG;
+
+ while(i>jiffies && !(inb(STAT_REG)&0xe0)) /* wait for a pseudo-interrupt */
+ barrier();
+
+ if (i <= jiffies) { /* Timed out */
+ rtrc(0);
+ current_SC->result = DID_TIME_OUT << 16;
+ current_SC->SCp.phase = idle;
+ current_SC->scsi_done(current_SC);
+ return;
+ }
+
+ NCR53c406a_intr(0, NULL);
+}
+
+int NCR53c406a_command(Scsi_Cmnd *SCpnt){
+ DEB(printk("NCR53c406a_command called\n"));
+ NCR53c406a_queue(SCpnt, internal_done);
+ if(irq_level)
+ while (!internal_done_flag);
+ else /* interrupts not supported */
+ while (!internal_done_flag)
+ wait_intr();
+
+ internal_done_flag = 0;
+ return internal_done_errcode;
+}
+
+
+int
+NCR53c406a_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)){
+ int i;
+ unsigned long flags = 0;
+
+ VDEB(printk("NCR53c406a_queue called\n"));
+ DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n",
+ SCpnt->cmnd[0],
+ SCpnt->cmd_len,
+ SCpnt->target,
+ SCpnt->lun,
+ SCpnt->request_bufflen));
+
+#if 0
+ VDEB(for(i=0; i<SCpnt->cmd_len; i++)
+ printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i]));
+ VDEB(printk("\n"));
+#endif
+
+ current_SC = SCpnt;
+ current_SC->scsi_done = done;
+ current_SC->SCp.phase = command_ph;
+ current_SC->SCp.Status = 0;
+ current_SC->SCp.Message = 0;
+
+ save_flags(flags);
+ cli();
+ REG0;
+ outb(SCpnt->target, DEST_ID); /* set destination */
+ outb(FLUSH_FIFO, CMD_REG); /* reset the fifos */
+
+ for(i=0; i<SCpnt->cmd_len; i++){
+ outb(SCpnt->cmnd[i], SCSI_FIFO);
+ }
+ outb(SELECT_NO_ATN, CMD_REG);
+ restore_flags(flags);
+
+ rtrc(1);
+ return 0;
+}
+
+int
+NCR53c406a_abort(Scsi_Cmnd *SCpnt){
+ DEB(printk("NCR53c406a_abort called\n"));
+ return SCSI_ABORT_SNOOZE; /* Don't know how to abort */
+}
+
+int
+NCR53c406a_reset(Scsi_Cmnd *SCpnt){
+ DEB(printk("NCR53c406a_reset called\n"));
+ outb(C4_IMG, CONFIG4); /* Select reg set 0 */
+ outb(CHIP_RESET, CMD_REG);
+ outb(SCSI_NOP, CMD_REG); /* required after reset */
+ outb(SCSI_RESET, CMD_REG);
+ chip_init();
+
+ rtrc(2);
+ if (irq_level)
+ return SCSI_RESET_PENDING; /* should get an interrupt */
+ else
+ return SCSI_RESET_WAKEUP; /* won't get any interrupts */
+}
+
+int
+NCR53c406a_biosparm(Scsi_Disk *disk, kdev_t dev, int* info_array){
+ int size;
+
+ DEB(printk("NCR53c406a_biosparm called\n"));
+
+ size = disk->capacity;
+ info_array[0] = 64; /* heads */
+ info_array[1] = 32; /* sectors */
+ info_array[2] = size>>11; /* cylinders */
+ if (info_array[2] > 1024) { /* big disk */
+ info_array[0] = 255;
+ info_array[1] = 63;
+ info_array[2] = size / (255*63);
+ }
+ return 0;
+}
+
+static void
+NCR53c406a_intr(int unused, struct pt_regs *regs){
+ DEB(unsigned char fifo_size;)
+ DEB(unsigned char seq_reg;)
+ unsigned char status, int_reg;
+ unsigned long flags = 0;
+#if USE_PIO
+ unsigned char pio_status;
+ struct scatterlist *sglist;
+ unsigned int sgcount;
+#endif
+
+ VDEB(printk("NCR53c406a_intr called\n"));
+
+ save_flags(flags);
+ cli();
+#if USE_PIO
+ REG1;
+ pio_status = inb(PIO_STATUS);
+#endif
+ REG0;
+ status = inb(STAT_REG);
+ DEB(seq_reg = inb(SEQ_REG));
+ int_reg = inb(INT_REG);
+ DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
+ restore_flags(flags);
+
+#if NCR53C406A_DEBUG
+ printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x",
+ status, seq_reg, int_reg, fifo_size);
+#if (USE_DMA)
+ printk("\n");
+#else
+ printk(", pio=%02x\n", pio_status);
+#endif USE_DMA
+#endif NCR53C406A_DEBUG
+
+ if(int_reg & 0x80){ /* SCSI reset intr */
+ rtrc(3);
+ DEB(printk("NCR53c406a: reset intr received\n"));
+ current_SC->SCp.phase = idle;
+ current_SC->result = DID_RESET << 16;
+ current_SC->scsi_done(current_SC);
+ return;
+ }
+
+#if USE_PIO
+ if(pio_status & 0x80) {
+ printk("NCR53C406A: Warning: PIO error!\n");
+ current_SC->SCp.phase = idle;
+ current_SC->result = DID_ERROR << 16;
+ current_SC->scsi_done(current_SC);
+ return;
+ }
+#endif USE_PIO
+
+ if(status & 0x20) { /* Parity error */
+ printk("NCR53c406a: Warning: parity error!\n");
+ current_SC->SCp.phase = idle;
+ current_SC->result = DID_PARITY << 16;
+ current_SC->scsi_done(current_SC);
+ return;
+ }
+
+ if(status & 0x40) { /* Gross error */
+ printk("NCR53c406a: Warning: gross error!\n");
+ current_SC->SCp.phase = idle;
+ current_SC->result = DID_ERROR << 16;
+ current_SC->scsi_done(current_SC);
+ return;
+ }
+
+ if(int_reg & 0x20){ /* Disconnect */
+ DEB(printk("NCR53c406a: disconnect intr received\n"));
+ if(current_SC->SCp.phase != message_in){ /* Unexpected disconnect */
+ current_SC->result = DID_NO_CONNECT << 16;
+ }
+ else{ /* Command complete, return status and message */
+ current_SC->result = (current_SC->SCp.Status & 0xff)
+ | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
+ }
+
+ rtrc(0);
+ current_SC->SCp.phase = idle;
+ current_SC->scsi_done( current_SC );
+ return;
+ }
+
+ switch(status & 0x07){ /* scsi phase */
+ case 0x00: /* DATA-OUT */
+ if(int_reg & 0x10){ /* Target requesting info transfer */
+ rtrc(5);
+ current_SC->SCp.phase = data_out;
+ VDEB(printk("NCR53c406a: Data-Out phase\n"));
+ outb(FLUSH_FIFO, CMD_REG);
+ LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */
+#if USE_DMA /* No s/g support for DMA */
+ NCR53c406a_dma_write(current_SC->request_buffer,
+ current_SC->request_bufflen);
+#endif USE_DMA
+ outb(TRANSFER_INFO | DMA_OP, CMD_REG);
+#if USE_PIO
+ if (!current_SC->use_sg) /* Don't use scatter-gather */
+ NCR53c406a_pio_write(current_SC->request_buffer,
+ current_SC->request_bufflen);
+ else { /* use scatter-gather */
+ sgcount = current_SC->use_sg;
+ sglist = current_SC->request_buffer;
+ while( sgcount-- ) {
+ NCR53c406a_pio_write(sglist->address, sglist->length);
+ sglist++;
+ }
+ }
+ REG0;
+#endif USE_PIO
+ }
+ break;
+
+ case 0x01: /* DATA-IN */
+ if(int_reg & 0x10){ /* Target requesting info transfer */
+ rtrc(6);
+ current_SC->SCp.phase = data_in;
+ VDEB(printk("NCR53c406a: Data-In phase\n"));
+ outb(FLUSH_FIFO, CMD_REG);
+ LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */
+#if USE_DMA /* No s/g support for DMA */
+ NCR53c406a_dma_read(current_SC->request_buffer,
+ current_SC->request_bufflen);
+#endif USE_DMA
+ outb(TRANSFER_INFO | DMA_OP, CMD_REG);
+#if USE_PIO
+ if (!current_SC->use_sg) /* Don't use scatter-gather */
+ NCR53c406a_pio_read(current_SC->request_buffer,
+ current_SC->request_bufflen);
+ else { /* Use scatter-gather */
+ sgcount = current_SC->use_sg;
+ sglist = current_SC->request_buffer;
+ while( sgcount-- ) {
+ NCR53c406a_pio_read(sglist->address, sglist->length);
+ sglist++;
+ }
+ }
+ REG0;
+#endif USE_PIO
+ }
+ break;
+
+ case 0x02: /* COMMAND */
+ current_SC->SCp.phase = command_ph;
+ printk("NCR53c406a: Warning: Unknown interupt occured in command phase!\n");
+ break;
+
+ case 0x03: /* STATUS */
+ rtrc(7);
+ current_SC->SCp.phase = status_ph;
+ VDEB(printk("NCR53c406a: Status phase\n"));
+#if 0
+#if VERBOSE_NCR53C406A_DEBUG
+ printk("request_buffer=");
+ for(i=0; i<current_SC->request_bufflen && i<256; i++)
+ printk("%02x ", *((unsigned char*)current_SC->request_buffer + i));
+ printk("\n");
+#if USE_DMA
+ printk("dma residue = %d\n", NCR53c406a_dma_residual());
+#endif USE_DMA
+#endif VERBOSE_NCR53C406A_DEBUG
+#endif
+
+ outb(FLUSH_FIFO, CMD_REG);
+ outb(INIT_CMD_COMPLETE, CMD_REG);
+ break;
+
+ case 0x04: /* Reserved */
+ case 0x05: /* Reserved */
+ printk("NCR53c406a: WARNING: Reserved phase!!!\n");
+ break;
+
+ case 0x06: /* MESSAGE-OUT */
+ DEB(printk("NCR53c406a: Message-Out phase\n"));
+ current_SC->SCp.phase = message_out;
+ outb(SET_ATN, CMD_REG); /* Reject the message */
+ outb(MSG_ACCEPT, CMD_REG);
+ break;
+
+ case 0x07: /* MESSAGE-IN */
+ rtrc(4);
+ VDEB(printk("NCR53c406a: Message-In phase\n"));
+ current_SC->SCp.phase = message_in;
+
+ current_SC->SCp.Status = inb(SCSI_FIFO);
+ current_SC->SCp.Message = inb(SCSI_FIFO);
+
+ VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
+ DEB(printk("Status = %02x Message = %02x\n",
+ current_SC->SCp.Status, current_SC->SCp.Message));
+
+ if(current_SC->SCp.Message == SAVE_POINTERS ||
+ current_SC->SCp.Message == DISCONNECT) {
+ outb(SET_ATN, CMD_REG); /* Reject message */
+ DEB(printk("Discarding SAVE_POINTERS message\n"));
+ }
+ outb(MSG_ACCEPT, CMD_REG);
+ break;
+ }
+}
+
+#ifndef IRQ_LEV
+static int irq_probe()
+{
+ int irqs, irq;
+ int i;
+
+ inb(INT_REG); /* clear the interrupt register */
+ sti();
+ irqs = probe_irq_on();
+
+ /* Invalid command will cause an interrupt */
+ REG0;
+ outb(0xff, CMD_REG);
+
+ /* Wait for the interrupt to occur */
+ i = jiffies + WATCHDOG;
+ while(i > jiffies && !(inb(STAT_REG) & 0x80))
+ barrier();
+ if (i <= jiffies) { /* Timed out, must be hardware trouble */
+ probe_irq_off(irqs);
+ return -1;
+ }
+
+ irq = probe_irq_off(irqs);
+
+ /* Kick the chip */
+ outb(CHIP_RESET, CMD_REG);
+ outb(SCSI_NOP, CMD_REG);
+ chip_init();
+
+ return irq;
+}
+#endif IRQ_LEV
+
+static void chip_init()
+{
+ REG1;
+#if USE_DMA
+ outb(0x00, PIO_STATUS);
+#else /* USE_PIO */
+ outb(0x01, PIO_STATUS);
+#endif
+ outb(0x00, PIO_FLAG);
+
+ outb(C4_IMG, CONFIG4); /* REG0; */
+ outb(C3_IMG, CONFIG3);
+ outb(C2_IMG, CONFIG2);
+ outb(C1_IMG, CONFIG1);
+
+ outb(0x05, CLKCONV); /* clock conversion factor */
+ outb(0x9C, SRTIMOUT); /* Selection timeout */
+ outb(0x05, SYNCPRD); /* Synchronous transfer period */
+ outb(SYNC_MODE, SYNCOFF); /* synchronous mode */
+}
+
+void calc_port_addr()
+{
+/* Control Register Set 0 */
+TC_LSB = (port_base+0x00);
+TC_MSB = (port_base+0x01);
+SCSI_FIFO = (port_base+0x02);
+CMD_REG = (port_base+0x03);
+STAT_REG = (port_base+0x04);
+DEST_ID = (port_base+0x04);
+INT_REG = (port_base+0x05);
+SRTIMOUT = (port_base+0x05);
+SEQ_REG = (port_base+0x06);
+SYNCPRD = (port_base+0x06);
+FIFO_FLAGS = (port_base+0x07);
+SYNCOFF = (port_base+0x07);
+CONFIG1 = (port_base+0x08);
+CLKCONV = (port_base+0x09);
+/* TESTREG = (port_base+0x0A); */
+CONFIG2 = (port_base+0x0B);
+CONFIG3 = (port_base+0x0C);
+CONFIG4 = (port_base+0x0D);
+TC_HIGH = (port_base+0x0E);
+/* FIFO_BOTTOM = (port_base+0x0F); */
+
+/* Control Register Set 1 */
+/* JUMPER_SENSE = (port_base+0x00);*/
+/* SRAM_PTR = (port_base+0x01);*/
+/* SRAM_DATA = (port_base+0x02);*/
+PIO_FIFO = (port_base+0x04);
+/* PIO_FIFO1 = (port_base+0x05);*/
+/* PIO_FIFO2 = (port_base+0x06);*/
+/* PIO_FIFO3 = (port_base+0x07);*/
+PIO_STATUS = (port_base+0x08);
+/* ATA_CMD = (port_base+0x09);*/
+/* ATA_ERR = (port_base+0x0A);*/
+PIO_FLAG = (port_base+0x0B);
+CONFIG5 = (port_base+0x0D);
+/* SIGNATURE = (port_base+0x0E);*/
+/* CONFIG6 = (port_base+0x0F);*/
+}
+
+#ifdef MODULE
+/* Eventually this will go into an include file, but this will be later */
+Scsi_Host_Template driver_template = NCR53c406a;
+
+#include "scsi_module.c"
+#endif
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]
with Sam's (original) version of this