patch-1.3.53 linux/drivers/net/depca.c
Next file: linux/drivers/net/ewrk3.c
Previous file: linux/drivers/net/ac3200.c
Back to the patch index
Back to the overall index
- Lines: 584
- Date:
Sat Dec 30 15:59:11 1995
- Orig file:
v1.3.52/linux/drivers/net/depca.c
- Orig date:
Tue Dec 26 04:45:36 1995
diff -u --recursive --new-file v1.3.52/linux/drivers/net/depca.c linux/drivers/net/depca.c
@@ -37,8 +37,9 @@
I have benchmarked the driver with a DE100 at 595kB/s to (542kB/s from)
a DECstation 5000/200.
- The author may be reached as [email protected] or
- Digital Equipment Corporation, 550 King Street, Littleton MA 01460.
+ The author may be reached at [email protected] or
+ [email protected] or Digital Equipment Corporation, 550 King
+ Street, Littleton MA 01460.
=========================================================================
@@ -132,8 +133,10 @@
that the correct bits are compiled (see end of source code).
4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
kernel with the depca configuration turned off and reboot.
- 5) insmod depca.o [irq=7] [io=0x200]
+ 5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
[Alan Cox: Changed the code to allow command line irq/io assignments]
+ [Dave Davies: Changed the code to allow command line mem/name
+ assignments]
6) run the net startup bits for your eth?? interface manually
(usually /etc/rc.inet[12] at boot time).
7) enjoy!
@@ -144,6 +147,15 @@
To unload a module, turn off the associated interface
'ifconfig eth?? down' then 'rmmod depca'.
+ To assign a base memory address for the shared memory when running as a
+ loadable module, see 5 above. To include the adapter name (if you have
+ no PROM but know the card name) also see 5 above. Note that this last
+ option will not work with kernel built-in depca's.
+
+ The shared memory assignment for a loadable module makes sense to avoid
+ the 'memory autoprobe' picking the wrong shared memory (for the case of
+ 2 depca's in a PC).
+
TO DO:
------
@@ -182,15 +194,20 @@
ALPHA support from <[email protected]>
0.41 26-Jun-95 Added verify_area() calls in depca_ioctl() from
suggestion by <[email protected]>
+ 0.42 27-Dec-95 Add 'mem' shared memory assigment for loadable
+ modules.
+ Add 'adapter_name' for loadable modules when no PROM.
+ Both above from a suggestion by
+ <[email protected]>.
+ Add new multicasting code.
=========================================================================
*/
-static const char *version = "depca.c:v0.41 5/26/95 [email protected]\n";
+static const char *version = "depca.c:v0.42 95/12/27 [email protected]\n";
#include <linux/module.h>
-#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
@@ -199,6 +216,7 @@
#include <linux/ioport.h>
#include <linux/malloc.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <asm/segment.h>
#include <asm/bitops.h>
#include <asm/io.h>
@@ -208,6 +226,10 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+
#include "depca.h"
#ifdef DEPCA_DEBUG
@@ -384,6 +406,7 @@
static void eisa_probe(struct device *dev, u_long iobase);
static struct device *alloc_device(struct device *dev, u_long iobase);
static int load_packet(struct device *dev, struct sk_buff *skb);
+static void depca_dbg_open(struct device *dev);
#ifdef MODULE
int init_module(void);
@@ -399,7 +422,11 @@
static char name[DEPCA_STRLEN];
static int num_depcas = 0, num_eth = 0;
-
+static int mem=0; /* For loadable module assignment
+ use insmod mem=0x????? .... */
+static char *adapter_name = '\0'; /* If no PROM when loadable module
+ use insmod adapter_name=DE??? ...
+ */
/*
** Miscellaneous defines...
*/
@@ -454,10 +481,19 @@
outb(nicsr, DEPCA_NICSR);
if (inw(DEPCA_DATA) == STOP) {
- for (; mem_base[mem_chkd]; mem_chkd++) {
- mem_start = mem_base[mem_chkd];
- DepcaSignature(name, mem_start);
- if (*name != '\0') break;
+ if (mem == 0) {
+ for (; mem_base[mem_chkd]; mem_chkd++) {
+ mem_start = mem_base[mem_chkd];
+ DepcaSignature(name, mem_start);
+ if (*name != '\0') break;
+ }
+ } else {
+ mem_start = mem;
+ if (adapter_name) {
+ strcpy(name, adapter_name);
+ } else{
+ DepcaSignature(name, mem_start);
+ }
}
if ((*name != '\0') && mem_start) { /* found a DEPCA device */
@@ -583,18 +619,18 @@
irqnum = autoirq_report(1);
if (!irqnum) {
- printk(" and failed to detect IRQ line.\n");
+ printk(" and failed to detect IRQ line.\n");
status = -ENXIO;
} else {
for (dev->irq=0,i=0; (depca_irq[i]) && (!dev->irq); i++) {
if (irqnum == depca_irq[i]) {
dev->irq = irqnum;
- printk(" and uses IRQ%d.\n", dev->irq);
+ printk(" and uses IRQ%d.\n", dev->irq);
}
}
if (!dev->irq) {
- printk(" but incorrect IRQ line detected.\n");
+ printk(" but incorrect IRQ line detected.\n");
status = -ENXIO;
}
}
@@ -647,115 +683,52 @@
static int
depca_open(struct device *dev)
{
- struct depca_private *lp = (struct depca_private *)dev->priv;
- s16 nicsr;
- u_long ioaddr = dev->base_addr;
- int i, status = 0;
- struct depca_init *p = (struct depca_init *)lp->sh_mem;
-
- if (request_irq(dev->irq, &depca_interrupt, 0, lp->adapter_name)) {
- printk("depca_open(): Requested IRQ%d is busy\n",dev->irq);
- status = -EAGAIN;
- }
-
- irq2dev_map[dev->irq] = dev;
- STOP_DEPCA;
- nicsr = inb(DEPCA_NICSR);
-
- /* Make sure the shadow RAM is enabled */
- if (adapter != DEPCA) {
- nicsr |= SHE;
- outb(nicsr, DEPCA_NICSR);
- }
+ struct depca_private *lp = (struct depca_private *)dev->priv;
+ u_long ioaddr = dev->base_addr;
+ s16 nicsr;
+ int status = 0;
- /* Re-initialize the DEPCA... */
- depca_init_ring(dev);
- LoadCSRs(dev);
+ irq2dev_map[dev->irq] = dev;
+ STOP_DEPCA;
+ nicsr = inb(DEPCA_NICSR);
- if (depca_debug > 1){
- /* Copy the shadow init_block to shared memory */
- memcpy_toio((char *)lp->sh_mem, &lp->init_block, sizeof(struct depca_init));
+ /* Make sure the shadow RAM is enabled */
+ if (adapter != DEPCA) {
+ nicsr |= SHE;
+ outb(nicsr, DEPCA_NICSR);
+ }
- printk("%s: depca open with irq %d\n",dev->name,dev->irq);
- printk("Descriptor head addresses:\n");
- printk("\t0x%lx 0x%lx\n",(u_long)lp->rx_ring, (u_long)lp->tx_ring);
- printk("Descriptor addresses:\nRX: ");
- for (i=0;i<lp->rxRingMask;i++){
- if (i < 3) {
- printk("0x%8.8lx ", (long) &lp->rx_ring[i].base);
- }
- }
- printk("...0x%8.8lx\n", (long) &lp->rx_ring[i].base);
- printk("TX: ");
- for (i=0;i<lp->txRingMask;i++){
- if (i < 3) {
- printk("0x%8.8lx ", (long) &lp->tx_ring[i].base);
- }
- }
- printk("...0x%8.8lx\n", (long) &lp->tx_ring[i].base);
- printk("\nDescriptor buffers:\nRX: ");
- for (i=0;i<lp->rxRingMask;i++){
- if (i < 3) {
- printk("0x%8.8lx ", readl(&lp->rx_ring[i].base));
- }
- }
- printk("...0x%8.8lx\n", readl(&lp->rx_ring[i].base));
- printk("TX: ");
- for (i=0;i<lp->txRingMask;i++){
- if (i < 3) {
- printk("0x%8.8lx ", readl(&lp->tx_ring[i].base));
- }
- }
- printk("...0x%8.8lx\n", readl(&lp->tx_ring[i].base));
- printk("Status: %d\n", status);
- printk("Initialisation block at 0x%8.8lx\n",lp->sh_mem);
- printk("\tmode: 0x%4.4lx\n",readw(&p->mode));
- printk("\tphysical address: ");
- for (i=0;i<ETH_ALEN-1;i++){
- printk("%2.2x:",(u_char)readb(&p->phys_addr[i]));
- }
- printk("%2.2x\n",(u_char)readb(&p->phys_addr[i]));
- printk("\tmulticast hash table: ");
- for (i=0;i<(HASH_TABLE_LEN >> 3)-1;i++){
- printk("%2.2x:",(u_char)readb(&p->mcast_table[i]));
- }
- printk("%2.2x\n",(u_char)readb(&p->mcast_table[i]));
- printk("\trx_ring at: 0x%8.8lx\n",readl(&p->rx_ring));
- printk("\ttx_ring at: 0x%8.8lx\n",readl(&p->tx_ring));
- printk("dma_buffs: 0x%8.8lx\n",lp->dma_buffs);
- printk("Ring size:\nRX: %d Log2(rxRingMask): 0x%8.8x\n",
- (int)lp->rxRingMask + 1,
- lp->rx_rlen);
- printk("TX: %d Log2(txRingMask): 0x%8.8x\n",
- (int)lp->txRingMask + 1,
- lp->tx_rlen);
- outw(CSR2,DEPCA_ADDR);
- printk("CSR2&1: 0x%4.4x",inw(DEPCA_DATA));
- outw(CSR1,DEPCA_ADDR);
- printk("%4.4x\n",inw(DEPCA_DATA));
- outw(CSR3,DEPCA_ADDR);
- printk("CSR3: 0x%4.4x\n",inw(DEPCA_DATA));
- }
+ /* Re-initialize the DEPCA... */
+ depca_init_ring(dev);
+ LoadCSRs(dev);
+
+ depca_dbg_open(dev);
+
+ if (request_irq(dev->irq, &depca_interrupt, 0, lp->adapter_name)) {
+ printk("depca_open(): Requested IRQ%d is busy\n",dev->irq);
+ status = -EAGAIN;
+ } else {
/* Enable DEPCA board interrupts and turn off LED */
nicsr = ((nicsr & ~IM & ~LED)|IEN);
outb(nicsr, DEPCA_NICSR);
outw(CSR0,DEPCA_ADDR);
-
+
dev->tbusy = 0;
dev->interrupt = 0;
dev->start = 1;
-
+
status = InitRestartDepca(dev);
if (depca_debug > 1){
printk("CSR0: 0x%4.4x\n",inw(DEPCA_DATA));
printk("nicsr: 0x%02x\n",inb(DEPCA_NICSR));
}
+ }
- MOD_INC_USE_COUNT;
-
- return status;
+ MOD_INC_USE_COUNT;
+
+ return status;
}
/* Initialize the lance Rx and Tx descriptor rings. */
@@ -940,8 +913,8 @@
skb = dev_alloc_skb(pkt_len+2);
if (skb != NULL) {
- unsigned char * buf;
- skb_reserve(skb,2); /* 16 byte align the IP header */
+ unsigned char *buf;
+ skb_reserve(skb,2); /* 16 byte align the IP header */
buf = skb_put(skb,pkt_len);
skb->dev = dev;
if (entry < lp->rx_old) { /* Wrapped buffer */
@@ -1166,15 +1139,13 @@
STOP_DEPCA; /* Temporarily stop the depca. */
depca_init_ring(dev); /* Initialize the descriptor rings */
- if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
- {
- lp->init_block.mode |= PROM; /* Set promiscuous mode */
- }
- else
- {
- SetMulticastFilter(dev);
- lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */
+ lp->init_block.mode |= PROM;
+ } else {
+ SetMulticastFilter(dev);
+ lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */
}
+
LoadCSRs(dev); /* Reload CSR3 */
InitRestartDepca(dev); /* Resume normal operation. */
dev->tbusy = 0; /* Unlock the TX ring */
@@ -1190,32 +1161,28 @@
static void SetMulticastFilter(struct device *dev)
{
struct depca_private *lp = (struct depca_private *)dev->priv;
+ struct dev_mc_list *dmi=dev->mc_list;
+ char *addrs;
int i, j, bit, byte;
u16 hashcode;
s32 crc, poly = CRC_POLYNOMIAL_BE;
- struct dev_mc_list *dmi=dev->mc_list;
- if (dev->mc_count >= HASH_TABLE_LEN)
- { /* Set all multicast bits */
- for (i=0; i<(HASH_TABLE_LEN>>3); i++)
- {
- lp->init_block.mcast_table[i] = (char)0xff;
- }
- }
- else {
- /* Clear the multicast table first */
- for (i=0; i<(HASH_TABLE_LEN>>3); i++){
+ if (dev->flags & IFF_ALLMULTI) { /* Set all multicast bits */
+ for (i=0; i<(HASH_TABLE_LEN>>3); i++) {
+ lp->init_block.mcast_table[i] = (char)0xff;
+ }
+ } else {
+ for (i=0; i<(HASH_TABLE_LEN>>3); i++){ /* Clear the multicast table */
lp->init_block.mcast_table[i]=0;
}
-
- /* Add multicast addresses */
- for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
- unsigned char *addrs=dmi->dmi_addr;
+ /* Add multicast addresses */
+ for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
+ addrs=dmi->dmi_addr;
dmi=dmi->next;
if ((*addrs & 0x01) == 1) { /* multicast address? */
crc = 0xffffffff; /* init CRC for each address */
for (byte=0;byte<ETH_ALEN;byte++) {/* for each address byte */
- /* process each address bit */
+ /* process each address bit */
for (bit = *addrs++,j=0;j<8;j++, bit>>=1) {
crc = (crc << 1) ^ ((((crc<0?1:0) ^ bit) & 0x01) ? poly : 0);
}
@@ -1229,8 +1196,6 @@
byte = hashcode >> 3; /* bit[3-5] -> byte in filter */
bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */
lp->init_block.mcast_table[byte] |= bit;
- } else { /* skip this address */
- addrs += ETH_ALEN;
}
}
}
@@ -1586,14 +1551,14 @@
for (i = entry; i != end; i = (++i) & lp->txRingMask) {
/* clean out flags */
writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base);
- writew(0x0000, &lp->tx_ring[i].misc); /* clears other error flags */
+ writew(0x0000, &lp->tx_ring[i].misc); /* clears other error flags */
writew(-TX_BUFF_SZ, &lp->tx_ring[i].length);/* packet length in buffer */
len -= TX_BUFF_SZ;
}
/* clean out flags */
writel(readl(&lp->tx_ring[end].base) & ~T_FLAGS, &lp->tx_ring[end].base);
- writew(0x0000, &lp->tx_ring[end].misc); /* clears other error flags */
- writew(-len, &lp->tx_ring[end].length); /* packet length in last buff */
+ writew(0x0000, &lp->tx_ring[end].misc); /* clears other error flags */
+ writew(-len, &lp->tx_ring[end].length); /* packet length in last buff */
/* start of packet */
writel(readl(&lp->tx_ring[entry].base) | T_STP, &lp->tx_ring[entry].base);
@@ -1635,7 +1600,7 @@
ManCode[0]=(((Eisa.Id[0]>>2)&0x1f)+0x40);
ManCode[1]=(((Eisa.Id[1]&0xe0)>>5)+((Eisa.Id[0]&0x03)<<3)+0x40);
ManCode[2]=(((Eisa.Id[2]>>4)&0x0f)+0x30);
- ManCode[3]=((Eisa.Id[2]&0x0f)+0x30);
+ ManCode[3]=(( Eisa.Id[2]&0x0f)+0x30);
ManCode[4]=(((Eisa.Id[3]>>4)&0x0f)+0x30);
ManCode[5]='\0';
@@ -1649,9 +1614,84 @@
return status;
}
+static void depca_dbg_open(struct device *dev)
+{
+ struct depca_private *lp = (struct depca_private *)dev->priv;
+ u_long ioaddr = dev->base_addr;
+ struct depca_init *p = (struct depca_init *)lp->sh_mem;
+ int i;
+
+ if (depca_debug > 1){
+ /* Copy the shadow init_block to shared memory */
+ memcpy_toio((char *)lp->sh_mem,&lp->init_block,sizeof(struct depca_init));
+
+ printk("%s: depca open with irq %d\n",dev->name,dev->irq);
+ printk("Descriptor head addresses:\n");
+ printk("\t0x%lx 0x%lx\n",(u_long)lp->rx_ring, (u_long)lp->tx_ring);
+ printk("Descriptor addresses:\nRX: ");
+ for (i=0;i<lp->rxRingMask;i++){
+ if (i < 3) {
+ printk("0x%8.8lx ", (long) &lp->rx_ring[i].base);
+ }
+ }
+ printk("...0x%8.8lx\n", (long) &lp->rx_ring[i].base);
+ printk("TX: ");
+ for (i=0;i<lp->txRingMask;i++){
+ if (i < 3) {
+ printk("0x%8.8lx ", (long) &lp->tx_ring[i].base);
+ }
+ }
+ printk("...0x%8.8lx\n", (long) &lp->tx_ring[i].base);
+ printk("\nDescriptor buffers:\nRX: ");
+ for (i=0;i<lp->rxRingMask;i++){
+ if (i < 3) {
+ printk("0x%8.8x ", readl(&lp->rx_ring[i].base));
+ }
+ }
+ printk("...0x%8.8x\n", readl(&lp->rx_ring[i].base));
+ printk("TX: ");
+ for (i=0;i<lp->txRingMask;i++){
+ if (i < 3) {
+ printk("0x%8.8x ", readl(&lp->tx_ring[i].base));
+ }
+ }
+ printk("...0x%8.8x\n", readl(&lp->tx_ring[i].base));
+ printk("Initialisation block at 0x%8.8lx\n",lp->sh_mem);
+ printk("\tmode: 0x%4.4x\n",readw(&p->mode));
+ printk("\tphysical address: ");
+ for (i=0;i<ETH_ALEN-1;i++){
+ printk("%2.2x:",(u_char)readb(&p->phys_addr[i]));
+ }
+ printk("%2.2x\n",(u_char)readb(&p->phys_addr[i]));
+ printk("\tmulticast hash table: ");
+ for (i=0;i<(HASH_TABLE_LEN >> 3)-1;i++){
+ printk("%2.2x:",(u_char)readb(&p->mcast_table[i]));
+ }
+ printk("%2.2x\n",(u_char)readb(&p->mcast_table[i]));
+ printk("\trx_ring at: 0x%8.8x\n",readl(&p->rx_ring));
+ printk("\ttx_ring at: 0x%8.8x\n",readl(&p->tx_ring));
+ printk("dma_buffs: 0x%8.8lx\n",lp->dma_buffs);
+ printk("Ring size:\nRX: %d Log2(rxRingMask): 0x%8.8x\n",
+ (int)lp->rxRingMask + 1,
+ lp->rx_rlen);
+ printk("TX: %d Log2(txRingMask): 0x%8.8x\n",
+ (int)lp->txRingMask + 1,
+ lp->tx_rlen);
+ outw(CSR2,DEPCA_ADDR);
+ printk("CSR2&1: 0x%4.4x",inw(DEPCA_DATA));
+ outw(CSR1,DEPCA_ADDR);
+ printk("%4.4x\n",inw(DEPCA_DATA));
+ outw(CSR3,DEPCA_ADDR);
+ printk("CSR3: 0x%4.4x\n",inw(DEPCA_DATA));
+ }
+
+ return;
+}
+
/*
** Perform IOCTL call functions here. Some are privileged operations and the
** effective uid is checked in those cases.
+** All MCA IOCTLs will not work here and are for testing purposes only.
*/
static int depca_ioctl(struct device *dev, struct ifreq *rq, int cmd)
{
@@ -1745,16 +1785,11 @@
}
break;
-#if 0
case DEPCA_SET_MCA: /* Set a multicast address */
if (suser()) {
- if (ioc->len != HASH_TABLE_LEN) { /* MCA changes */
- if (!(status=verify_area(VERIFY_READ, ioc->data, ETH_ALEN*ioc->len))) {
- memcpy_fromfs(tmp.addr, ioc->data, ETH_ALEN * ioc->len);
- set_multicast_list(dev, ioc->len, tmp.addr);
- }
- } else {
- set_multicast_list(dev, ioc->len, NULL);
+ if (!(status=verify_area(VERIFY_READ, ioc->data, ETH_ALEN*ioc->len))) {
+ memcpy_fromfs(tmp.addr, ioc->data, ETH_ALEN * ioc->len);
+ set_multicast_list(dev);
}
} else {
status = -EPERM;
@@ -1763,7 +1798,7 @@
break;
case DEPCA_CLR_MCA: /* Clear all multicast addresses */
if (suser()) {
- set_multicast_list(dev, 0, NULL);
+ set_multicast_list(dev);
} else {
status = -EPERM;
}
@@ -1771,13 +1806,12 @@
break;
case DEPCA_MCA_EN: /* Enable pass all multicast addressing */
if (suser()) {
- set_multicast_list(dev, HASH_TABLE_LEN, NULL);
+ set_multicast_list(dev);
} else {
status = -EPERM;
}
break;
-#endif
case DEPCA_GET_STATS: /* Get the driver statistics */
cli();
ioc->len = sizeof(lp->pktStats);
@@ -1819,21 +1853,21 @@
#ifdef MODULE
static char devicename[9] = { 0, };
static struct device thisDepca = {
- devicename, /* device name is inserted by linux/drivers/net/net_init.c */
+ devicename, /* device name is inserted by /linux/drivers/net/net_init.c */
0, 0, 0, 0,
- 0x200, 7, /* I/O address, IRQ */
+ 0x200, 7, /* I/O address, IRQ */
0, 0, 0, NULL, depca_probe };
static int irq=7; /* EDIT THESE LINE FOR YOUR CONFIGURATION */
static int io=0x200; /* Or use the irq= io= options to insmod */
-
+
+/* See depca_probe() for autoprobe messages when a module */
int
init_module(void)
{
- if (io == 0)
- printk("depca: You should not use auto-probing with insmod!\n");
thisDepca.irq=irq;
thisDepca.base_addr=io;
+
if (register_netdev(&thisDepca) != 0)
return -EIO;
@@ -1843,13 +1877,14 @@
void
cleanup_module(void)
{
- release_region(thisDepca.base_addr, DEPCA_TOTAL_SIZE);
- if (thisDepca.priv) {
- kfree_s(thisDepca.priv, sizeof(struct depca_private));
- thisDepca.priv = NULL;
- }
+ release_region(thisDepca.base_addr, DEPCA_TOTAL_SIZE);
+ if (thisDepca.priv) {
+ kfree(thisDepca.priv);
+ thisDepca.priv = NULL;
+ }
+ thisDepca.irq=0;
- unregister_netdev(&thisDepca);
+ unregister_netdev(&thisDepca);
}
#endif /* MODULE */
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]
with Sam's (original) version of this