patch-2.1.30 linux/drivers/scsi/aha1740.c
Next file: linux/drivers/scsi/aha1740.h
Previous file: linux/drivers/scsi/README.BusLogic
Back to the patch index
Back to the overall index
- Lines: 635
- Date:
Wed Mar 12 09:01:52 1997
- Orig file:
v2.1.29/linux/drivers/scsi/aha1740.c
- Orig date:
Fri Dec 27 02:03:23 1996
diff -u --recursive --new-file v2.1.29/linux/drivers/scsi/aha1740.c linux/drivers/scsi/aha1740.c
@@ -13,6 +13,11 @@
* for proper handling of multiple devices courteously
* provided by Michael Weller, March, 1993
*
+ * Multiple adapter support, extended translation detection,
+ * update to current scsi subsystem changes, proc fs support,
+ * working (!) module support based on patches from Andreas Arens,
+ * by Andreas Degert <[email protected]>, 2/1997
+ *
* aha1740_makecode may still need even more work
* if it doesn't work for your devices, take a look.
*/
@@ -59,12 +64,52 @@
static const char RCSid[] = "$Header: /usr/src/linux/kernel/blk_drv/scsi/RCS/aha1740.c,v 1.1 1992/07/24 06:27:38 root Exp root $";
*/
-static unsigned int slot, base;
-static unsigned char irq_level;
+struct aha1740_hostdata {
+ unsigned int slot;
+ unsigned int translation;
+ unsigned int last_ecb_used;
+ struct ecb ecb[AHA1740_ECBS];
+};
+
+#define HOSTDATA(host) ((struct aha1740_hostdata *) &host->hostdata)
-static struct ecb ecb[AHA1740_ECBS]; /* One for each queued operation */
+/* One for each IRQ level (9-15) */
+static struct Scsi_Host * aha_host[8] = {NULL, };
+
+int aha1740_proc_info(char *buffer, char **start, off_t offset,
+ int length, int hostno, int inout)
+{
+ int len;
+ struct Scsi_Host * shpnt;
+ struct aha1740_hostdata *host;
+
+ if (inout)
+ return(-ENOSYS);
+
+ for (len = 0; len < 8; len++) {
+ shpnt = aha_host[len];
+ if (shpnt && shpnt->host_no == hostno)
+ break;
+ }
+ host = HOSTDATA(shpnt);
+
+ len = sprintf(buffer, "aha174x at IO:%x, IRQ %d, SLOT %d.\n"
+ "Extended translation %sabled.\n",
+ shpnt->io_port, shpnt->irq, host->slot,
+ host->translation ? "en" : "dis");
+
+ if (offset > len) {
+ *start = buffer;
+ return 0;
+ }
+
+ *start = buffer + offset;
+ len -= offset;
+ if (len > length)
+ len = length;
+ return len;
+}
-static int aha1740_last_ecb_used = 0; /* optimization */
int aha1740_makecode(unchar *sense, unchar *status)
{
@@ -88,8 +133,9 @@
status_word = * (struct statusword *) status;
#ifdef DEBUG
-printk("makecode from %x,%x,%x,%x %x,%x,%x,%x",status[0],status[1],status[2],status[3],
-sense[0],sense[1],sense[2],sense[3]);
+ printk("makecode from %x,%x,%x,%x %x,%x,%x,%x",
+ status[0], status[1], status[2], status[3],
+ sense[0], sense[1], sense[2], sense[3]);
#endif
if (!status_word.don) /* Anything abnormal was detected */
{
@@ -113,8 +159,8 @@
break;
case 0x04:
case 0x05:
- retval=DID_ABORT; /* Either by this driver or the AHA1740
- itself */
+ retval=DID_ABORT;
+ /* Either by this driver or the AHA1740 itself */
break;
default:
retval=DID_ERROR; /* No further diagnostics possible */
@@ -141,35 +187,35 @@
return status[3] | retval << 16;
}
-int aha1740_test_port(void)
+int aha1740_test_port(unsigned int base)
{
- char name[4],tmp;
+ char name[4], tmp;
/* Okay, look for the EISA ID's */
- name[0]= 'A' -1 + ((tmp = inb(HID0)) >> 2); /* First character */
+ name[0]= 'A' -1 + ((tmp = inb(HID0(base))) >> 2); /* First character */
name[1]= 'A' -1 + ((tmp & 3) << 3);
- name[1]+= ((tmp = inb(HID1)) >> 5)&0x7; /* Second Character */
+ name[1]+= ((tmp = inb(HID1(base))) >> 5)&0x7; /* Second Character */
name[2]= 'A' -1 + (tmp & 0x1f); /* Third Character */
name[3]=0;
- tmp = inb(HID2);
- if ( strcmp ( name, HID_MFG ) || inb(HID2) != HID_PRD )
+ tmp = inb(HID2(base));
+ if ( strcmp ( name, HID_MFG ) || inb(HID2(base)) != HID_PRD )
return 0; /* Not an Adaptec 174x */
-/* if ( inb(HID3) != HID_REV )
- printk("aha1740: Warning; board revision of %d; expected %d\n",
- inb(HID3),HID_REV); */
+/* if ( inb(HID3(base)) != HID_REV )
+ printk("aha174x: Warning; board revision of %d; expected %d\n",
+ inb(HID3(base)),HID_REV); */
- if ( inb(EBCNTRL) != EBCNTRL_VALUE )
+ if ( inb(EBCNTRL(base)) != EBCNTRL_VALUE )
{
- printk("aha1740: Board detected, but EBCNTRL = %x, so disabled it.\n",
- inb(EBCNTRL));
+ printk("aha174x: Board detected, but EBCNTRL = %x, so disabled it.\n",
+ inb(EBCNTRL(base)));
return 0;
}
- if ( inb(PORTADR) & PORTADDR_ENH )
+ if ( inb(PORTADR(base)) & PORTADDR_ENH )
return 1; /* Okay, we're all set */
- printk("aha1740: Board detected, but not in enhanced mode, so disabled it.\n");
+ printk("aha174x: Board detected, but not in enhanced mode, so disabled it.\n");
return 0;
}
@@ -181,49 +227,58 @@
int number_serviced;
struct ecb *ecbptr;
Scsi_Cmnd *SCtmp;
+ unsigned int base;
+ if (!aha_host[irq - 9])
+ panic("aha1740.c: Irq from unknown host!\n");
+ base = aha_host[irq - 9]->io_port;
number_serviced = 0;
- while(inb(G2STAT) & G2STAT_INTPEND)
+ while(inb(G2STAT(base)) & G2STAT_INTPEND)
{
DEB(printk("aha1740_intr top of loop.\n"));
- adapstat = inb(G2INTST);
- ecbptr = (struct ecb *) bus_to_virt(inl(MBOXIN0));
- outb(G2CNTRL_IRST,G2CNTRL); /* interrupt reset */
+ adapstat = inb(G2INTST(base));
+ ecbptr = (struct ecb *) bus_to_virt(inl(MBOXIN0(base)));
+ outb(G2CNTRL_IRST,G2CNTRL(base)); /* interrupt reset */
switch ( adapstat & G2INTST_MASK )
{
case G2INTST_CCBRETRY:
case G2INTST_CCBERROR:
case G2INTST_CCBGOOD:
- outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */
+ /* Host Ready -> Mailbox in complete */
+ outb(G2CNTRL_HRDY,G2CNTRL(base));
if (!ecbptr)
{
printk("Aha1740 null ecbptr in interrupt (%x,%x,%x,%d)\n",
- inb(G2STAT),adapstat,inb(G2INTST),number_serviced++);
+ inb(G2STAT(base)),adapstat,
+ inb(G2INTST(base)), number_serviced++);
continue;
}
SCtmp = ecbptr->SCpnt;
if (!SCtmp)
{
printk("Aha1740 null SCtmp in interrupt (%x,%x,%x,%d)\n",
- inb(G2STAT),adapstat,inb(G2INTST),number_serviced++);
+ inb(G2STAT(base)),adapstat,
+ inb(G2INTST(base)), number_serviced++);
continue;
}
if (SCtmp->host_scribble)
scsi_free(SCtmp->host_scribble, 512);
- /* Fetch the sense data, and tuck it away, in the required slot. The
- Adaptec automatically fetches it, and there is no guarantee that
- we will still have it in the cdb when we come back */
+ /* Fetch the sense data, and tuck it away, in the required slot.
+ The Adaptec automatically fetches it, and there is no
+ guarantee that we will still have it in the cdb when we come
+ back */
if ( (adapstat & G2INTST_MASK) == G2INTST_CCBERROR )
- {
+ {
memcpy(SCtmp->sense_buffer, ecbptr->sense,
sizeof(SCtmp->sense_buffer));
errstatus = aha1740_makecode(ecbptr->sense,ecbptr->status);
- }
+ }
else
errstatus = 0;
- DEB(if (errstatus) printk("aha1740_intr_handle: returning %6x\n", errstatus));
+ DEB(if (errstatus) printk("aha1740_intr_handle: returning %6x\n",
+ errstatus));
SCtmp->result = errstatus;
my_done = ecbptr->done;
memset(ecbptr,0,sizeof(struct ecb));
@@ -231,12 +286,14 @@
my_done(SCtmp);
break;
case G2INTST_HARDFAIL:
- printk("aha1740 hardware failure!\n");
+ printk(KERN_ALERT "aha1740 hardware failure!\n");
panic("aha1740.c"); /* Goodbye */
case G2INTST_ASNEVENT:
- printk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n",adapstat,
- inb(MBOXIN0),inb(MBOXIN1),inb(MBOXIN2),inb(MBOXIN3)); /* Say What? */
- outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */
+ printk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n",
+ adapstat, inb(MBOXIN0(base)), inb(MBOXIN1(base)),
+ inb(MBOXIN2(base)), inb(MBOXIN3(base))); /* Say What? */
+ /* Host Ready -> Mailbox in complete */
+ outb(G2CNTRL_HRDY,G2CNTRL(base));
break;
case G2INTST_CMDGOOD:
/* set immediate command success flag here: */
@@ -245,7 +302,7 @@
/* Set immediate command failure flag here: */
break;
}
- number_serviced++;
+ number_serviced++;
}
}
@@ -254,18 +311,19 @@
unchar direction;
unchar *cmd = (unchar *) SCpnt->cmnd;
unchar target = SCpnt->target;
+ struct aha1740_hostdata *host = HOSTDATA(SCpnt->host);
unsigned long flags;
void *buff = SCpnt->request_buffer;
int bufflen = SCpnt->request_bufflen;
int ecbno;
DEB(int i);
-
if(*cmd == REQUEST_SENSE)
{
if (bufflen != sizeof(SCpnt->sense_buffer))
{
- printk("Wrong buffer length supplied for request sense (%d)\n",bufflen);
+ printk("Wrong buffer length supplied for request sense (%d)\n",
+ bufflen);
}
SCpnt->result = 0;
done(SCpnt);
@@ -279,39 +337,41 @@
i = scsi2int(cmd+2);
else
i = -1;
- printk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen);
+ printk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ",
+ target, *cmd, i, bufflen);
printk("scsi cmd:");
for (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
printk("\n");
#endif
/* locate an available ecb */
-
save_flags(flags);
cli();
- ecbno = aha1740_last_ecb_used + 1; /* An optimization */
- if (ecbno >= AHA1740_ECBS) ecbno = 0;
-
- do{
- if( ! ecb[ecbno].cmdw )
- break;
- ecbno++;
- if (ecbno >= AHA1740_ECBS ) ecbno = 0;
- } while (ecbno != aha1740_last_ecb_used);
+ ecbno = host->last_ecb_used + 1; /* An optimization */
+ if (ecbno >= AHA1740_ECBS)
+ ecbno = 0;
+ do {
+ if (!host->ecb[ecbno].cmdw)
+ break;
+ ecbno++;
+ if (ecbno >= AHA1740_ECBS)
+ ecbno = 0;
+ } while (ecbno != host->last_ecb_used);
- if( ecb[ecbno].cmdw )
- panic("Unable to find empty ecb for aha1740.\n");
+ if (host->ecb[ecbno].cmdw)
+ panic("Unable to find empty ecb for aha1740.\n");
- ecb[ecbno].cmdw = AHA1740CMD_INIT; /* SCSI Initiator Command doubles as reserved flag */
+ host->ecb[ecbno].cmdw = AHA1740CMD_INIT; /* SCSI Initiator Command
+ doubles as reserved flag */
- aha1740_last_ecb_used = ecbno;
+ host->last_ecb_used = ecbno;
restore_flags(flags);
#ifdef DEBUG
- printk("Sending command (%d %x)...",ecbno, done);
+ printk("Sending command (%d %x)...", ecbno, done);
#endif
- ecb[ecbno].cdblen = SCpnt->cmd_len; /* SCSI Command Descriptor Block Length */
+ host->ecb[ecbno].cdblen = SCpnt->cmd_len; /* SCSI Command Descriptor Block Length */
direction = 0;
if (*cmd == READ_10 || *cmd == READ_6)
@@ -319,17 +379,16 @@
else if (*cmd == WRITE_10 || *cmd == WRITE_6)
direction = 0;
- memcpy(ecb[ecbno].cdb, cmd, ecb[ecbno].cdblen);
+ memcpy(host->ecb[ecbno].cdb, cmd, SCpnt->cmd_len);
if (SCpnt->use_sg)
{
struct scatterlist * sgpnt;
struct aha1740_chain * cptr;
int i;
-#ifdef DEBUG
- unsigned char * ptr;
-#endif
- ecb[ecbno].sg = 1; /* SCSI Initiator Command w/scatter-gather*/
+ DEB(unsigned char * ptr);
+
+ host->ecb[ecbno].sg = 1; /* SCSI Initiator Command w/scatter-gather*/
SCpnt->host_scribble = (unsigned char *) scsi_malloc(512);
sgpnt = (struct scatterlist *) SCpnt->request_buffer;
cptr = (struct aha1740_chain *) SCpnt->host_scribble;
@@ -339,8 +398,8 @@
cptr[i].datalen = sgpnt[i].length;
cptr[i].dataptr = virt_to_bus(sgpnt[i].address);
}
- ecb[ecbno].datalen = SCpnt->use_sg * sizeof(struct aha1740_chain);
- ecb[ecbno].dataptr = virt_to_bus(cptr);
+ host->ecb[ecbno].datalen = SCpnt->use_sg * sizeof(struct aha1740_chain);
+ host->ecb[ecbno].dataptr = virt_to_bus(cptr);
#ifdef DEBUG
printk("cptr %x: ",cptr);
ptr = (unsigned char *) cptr;
@@ -350,144 +409,161 @@
else
{
SCpnt->host_scribble = NULL;
- ecb[ecbno].datalen = bufflen;
- ecb[ecbno].dataptr = virt_to_bus(buff);
+ host->ecb[ecbno].datalen = bufflen;
+ host->ecb[ecbno].dataptr = virt_to_bus(buff);
}
- ecb[ecbno].lun = SCpnt->lun;
- ecb[ecbno].ses = 1; /* Suppress underrun errors */
- ecb[ecbno].dir= direction;
- ecb[ecbno].ars=1; /* Yes, get the sense on an error */
- ecb[ecbno].senselen = 12;
- ecb[ecbno].senseptr = virt_to_bus(ecb[ecbno].sense);
- ecb[ecbno].statusptr = virt_to_bus(ecb[ecbno].status);
- ecb[ecbno].done = done;
- ecb[ecbno].SCpnt = SCpnt;
+ host->ecb[ecbno].lun = SCpnt->lun;
+ host->ecb[ecbno].ses = 1; /* Suppress underrun errors */
+ host->ecb[ecbno].dir = direction;
+ host->ecb[ecbno].ars = 1; /* Yes, get the sense on an error */
+ host->ecb[ecbno].senselen = 12;
+ host->ecb[ecbno].senseptr = virt_to_bus(host->ecb[ecbno].sense);
+ host->ecb[ecbno].statusptr = virt_to_bus(host->ecb[ecbno].status);
+ host->ecb[ecbno].done = done;
+ host->ecb[ecbno].SCpnt = SCpnt;
#ifdef DEBUG
{
int i;
printk("aha1740_command: sending.. ");
- for (i = 0; i < sizeof(ecb[ecbno])-10; i++)
- printk("%02x ", ((unchar *)&ecb[ecbno])[i]);
+ for (i = 0; i < sizeof(host->ecb[ecbno]) - 10; i++)
+ printk("%02x ", ((unchar *)&host->ecb[ecbno])[i]);
}
printk("\n");
#endif
if (done)
- { /* You may question the code below, which contains potentially
- non-terminating while loops with interrupts disabled. So did
- I when I wrote it, but the Adaptec Spec says the card is so fast,
- that this problem virtually never occurs so I've kept it. We
- do printk a warning first, so that you'll know if it happens.
- In practice the only time we've seen this message is when some-
- thing else is in the driver was broken, like _makecode(), or
- when a scsi device hung the scsi bus. Even under these conditions,
- The loop actually only cycled < 3 times (we instrumented it). */
-
+ { /* The Adaptec Spec says the card is so fast that the loops will
+ only be executed once in the code below. Even if this was true
+ with the fastest processors when the spec was written, it doesn't
+ seem to be true with todays fast processors. We print a warning
+ if the code is executed more often than LOOPCNT_WARN. If this
+ happens, it should be investigated. If the count reaches
+ LOOPCNT_MAX, we assume something is broken; since there is no
+ way to return an error (the return value is ignored by the
+ mid-level scsi layer) we have to panic (and maybe that's the
+ best thing we can do then anyhow). */
+
+#define LOOPCNT_WARN 10 /* excessive mbxout wait -> syslog-msg */
+#define LOOPCNT_MAX 1000000 /* mbxout deadlock -> panic() after ~ 2 sec. */
+ int loopcnt;
+ unsigned int base = SCpnt->host->io_port;
DEB(printk("aha1740[%d] critical section\n",ecbno));
save_flags(flags);
cli();
- if ( ! (inb(G2STAT) & G2STAT_MBXOUT) )
- {
- printk("aha1740[%d]_mbxout wait!\n",ecbno);
- cli(); /* printk may have done a sti()! */
+ for (loopcnt = 0; ; loopcnt++) {
+ if (inb(G2STAT(base)) & G2STAT_MBXOUT) break;
+ if (loopcnt == LOOPCNT_WARN) {
+ printk("aha1740[%d]_mbxout wait!\n",ecbno);
+ cli(); /* printk may have done a sti()! */
+ }
+ if (loopcnt == LOOPCNT_MAX)
+ panic("aha1740.c: mbxout busy!\n");
}
- mb();
- while ( ! (inb(G2STAT) & G2STAT_MBXOUT) ); /* Oh Well. */
- outl(virt_to_bus(ecb+ecbno), MBOXOUT0);
- if ( inb(G2STAT) & G2STAT_BUSY )
- {
- printk("aha1740[%d]_attn wait!\n",ecbno);
- cli();
+ outl(virt_to_bus(host->ecb + ecbno), MBOXOUT0(base));
+ for (loopcnt = 0; ; loopcnt++) {
+ if (! (inb(G2STAT(base)) & G2STAT_BUSY)) break;
+ if (loopcnt == LOOPCNT_WARN) {
+ printk("aha1740[%d]_attn wait!\n",ecbno);
+ cli();
+ }
+ if (loopcnt == LOOPCNT_MAX)
+ panic("aha1740.c: attn wait failed!\n");
}
- while ( inb(G2STAT) & G2STAT_BUSY ); /* And Again! */
- outb(ATTN_START | (target & 7), ATTN); /* Start it up */
+ outb(ATTN_START | (target & 7), ATTN(base)); /* Start it up */
restore_flags(flags);
DEB(printk("aha1740[%d] request queued.\n",ecbno));
}
else
- printk("aha1740_queuecommand: done can't be NULL\n");
-
+ printk(KERN_ALERT "aha1740_queuecommand: done can't be NULL\n");
return 0;
}
-static volatile int internal_done_flag = 0;
-static volatile int internal_done_errcode = 0;
-
static void internal_done(Scsi_Cmnd * SCpnt)
{
- internal_done_errcode = SCpnt->result;
- ++internal_done_flag;
+ SCpnt->SCp.Status++;
}
int aha1740_command(Scsi_Cmnd * SCpnt)
{
aha1740_queuecommand(SCpnt, internal_done);
-
- while (!internal_done_flag);
- internal_done_flag = 0;
- return internal_done_errcode;
+ SCpnt->SCp.Status = 0;
+ while (!SCpnt->SCp.Status)
+ barrier();
+ return SCpnt->result;
}
/* Query the board for its irq_level. Nothing else matters
in enhanced mode on an EISA bus. */
-void aha1740_getconfig(void)
+void aha1740_getconfig(unsigned int base, unsigned int *irq_level,
+ unsigned int *translation)
{
- static int intab[] = { 9,10,11,12,0,14,15,0 };
+ static int intab[] = { 9, 10, 11, 12, 0, 14, 15, 0 };
- irq_level = intab [ inb(INTDEF)&0x7 ];
- outb(inb(INTDEF) | 0x10, INTDEF);
+ *irq_level = intab[inb(INTDEF(base)) & 0x7];
+ *translation = inb(RESV1(base)) & 0x1;
+ outb(inb(INTDEF(base)) | 0x10, INTDEF(base));
}
int aha1740_detect(Scsi_Host_Template * tpnt)
{
- tpnt->proc_dir = &proc_scsi_aha1740;
+ int count = 0, slot;
- memset(&ecb, 0, sizeof(struct ecb));
DEB(printk("aha1740_detect: \n"));
-
+
for ( slot=MINEISA; slot <= MAXEISA; slot++ )
{
- base = SLOTBASE(slot);
+ int slotbase;
+ unsigned int irq_level, translation;
+ struct Scsi_Host *shpnt;
+ struct aha1740_hostdata *host;
+ slotbase = SLOTBASE(slot);
/*
* The ioports for eisa boards are generally beyond that used in the
* check/allocate region code, but this may change at some point,
* so we go through the motions.
*/
- if(check_region(base, 0x5c)) continue; /* See if in use */
- if ( aha1740_test_port()) break;
- }
- if ( slot > MAXEISA )
- return 0;
-
- aha1740_getconfig();
-
- if ( (inb(G2STAT) & (G2STAT_MBXOUT | G2STAT_BUSY) ) != G2STAT_MBXOUT )
- { /* If the card isn't ready, hard reset it */
- outb(G2CNTRL_HRST,G2CNTRL);
- outb(0,G2CNTRL);
- }
-
- printk("Configuring Adaptec at IO:%x, IRQ %d\n",base,
- irq_level);
-
- DEB(printk("aha1740_detect: enable interrupt channel %d\n", irq_level));
-
- if (request_irq(irq_level,aha1740_intr_handle, 0, "aha1740", NULL))
- {
- printk("Unable to allocate IRQ for adaptec controller.\n");
- return 0;
+ if (check_region(slotbase, SLOTSIZE)) /* See if in use */
+ continue;
+ if (!aha1740_test_port(slotbase))
+ continue;
+ aha1740_getconfig(slotbase,&irq_level,&translation);
+ if ((inb(G2STAT(slotbase)) &
+ (G2STAT_MBXOUT|G2STAT_BUSY)) != G2STAT_MBXOUT)
+ { /* If the card isn't ready, hard reset it */
+ outb(G2CNTRL_HRST, G2CNTRL(slotbase));
+ outb(0, G2CNTRL(slotbase));
+ }
+ printk("Configuring aha174x at IO:%x, IRQ %d\n", slotbase, irq_level);
+ printk("aha174x: Extended translation %sabled.\n",
+ translation ? "en" : "dis");
+ DEB(printk("aha1740_detect: enable interrupt channel %d\n",irq_level));
+ if (request_irq(irq_level,aha1740_intr_handle,0,"aha1740",NULL)) {
+ printk("Unable to allocate IRQ for adaptec controller.\n");
+ continue;
+ }
+ shpnt = scsi_register(tpnt, sizeof(struct aha1740_hostdata));
+ request_region(slotbase, SLOTSIZE, "aha1740");
+ shpnt->base = 0;
+ shpnt->io_port = slotbase;
+ shpnt->n_io_port = SLOTSIZE;
+ shpnt->irq = irq_level;
+ shpnt->dma_channel = 0xff;
+ host = HOSTDATA(shpnt);
+ host->slot = slot;
+ host->translation = translation;
+ aha_host[irq_level - 9] = shpnt;
+ count++;
}
- request_region(base, 0x5c,"aha1740"); /* Reserve the space that we need to use */
- return 1;
+ return count;
}
/* Note: They following two functions do not apply very well to the Adaptec,
-which basically manages its own affairs quite well without our interference,
-so I haven't put anything into them. I can faintly imagine someone with a
-*very* badly behaved SCSI target (perhaps an old tape?) wanting the abort(),
-but it hasn't happened yet, and doing aborts brings the Adaptec to its
-knees. I cannot (at this moment in time) think of any reason to reset the
-card once it's running. So there. */
+ which basically manages its own affairs quite well without our interference,
+ so I haven't put anything into them. I can faintly imagine someone with a
+ *very* badly behaved SCSI target (perhaps an old tape?) wanting the abort(),
+ but it hasn't happened yet, and doing aborts brings the Adaptec to its
+ knees. I cannot (at this moment in time) think of any reason to reset the
+ card once it's running. So there. */
int aha1740_abort(Scsi_Cmnd * SCpnt)
{
@@ -507,13 +583,23 @@
int aha1740_biosparam(Disk * disk, kdev_t dev, int* ip)
{
- int size = disk->capacity;
-DEB(printk("aha1740_biosparam\n"));
- ip[0] = 64;
- ip[1] = 32;
- ip[2] = size >> 11;
-/* if (ip[2] >= 1024) ip[2] = 1024; */
- return 0;
+ int size = disk->capacity;
+ int extended = HOSTDATA(disk->device->host)->translation;
+
+ DEB(printk("aha1740_biosparam\n"));
+ if (extended && (ip[2] > 1024))
+ {
+ ip[0] = 255;
+ ip[1] = 63;
+ ip[2] = size / (255 * 63);
+ }
+ else
+ {
+ ip[0] = 64;
+ ip[1] = 32;
+ ip[2] = size >> 11;
+ }
+ return 0;
}
#ifdef MODULE
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]