patch-2.1.61 linux/fs/smbfs/sock.c
Next file: linux/fs/vfat/namei.c
Previous file: linux/fs/smbfs/proc.c
Back to the patch index
Back to the overall index
- Lines: 393
- Date:
Thu Oct 30 11:03:53 1997
- Orig file:
v2.1.60/linux/fs/smbfs/sock.c
- Orig date:
Wed Oct 15 16:04:23 1997
diff -u --recursive --new-file v2.1.60/linux/fs/smbfs/sock.c linux/fs/smbfs/sock.c
@@ -7,11 +7,9 @@
*/
#include <linux/sched.h>
-#include <linux/smb_fs.h>
#include <linux/errno.h>
#include <linux/socket.h>
#include <linux/fcntl.h>
-#include <linux/stat.h>
#include <linux/in.h>
#include <linux/net.h>
#include <linux/mm.h>
@@ -19,6 +17,7 @@
#include <net/scm.h>
#include <net/ip.h>
+#include <linux/smb_fs.h>
#include <linux/smb.h>
#include <linux/smbno.h>
@@ -97,11 +96,15 @@
while (1)
{
+ result = -EIO;
if (sk->dead)
{
+#ifdef SMBFS_PARANOIA
printk("smb_data_callback: sock dead!\n");
- return;
+#endif
+ break;
}
+
result = _recvfrom(socket, (void *) peek_buf, 1,
MSG_PEEK | MSG_DONTWAIT);
if (result == -EAGAIN)
@@ -362,6 +365,16 @@
}
/*
+ * Since we allocate memory in increments of PAGE_SIZE,
+ * round up the packet length to the next multiple.
+ */
+int
+smb_round_length(int len)
+{
+ return (len + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1);
+}
+
+/*
* smb_receive
* fs points to the correct segment
*/
@@ -369,6 +382,7 @@
smb_receive(struct smb_sb_info *server)
{
struct socket *socket = server_sock(server);
+ unsigned char * packet = server->packet;
int len, result;
unsigned char peek_buf[4];
@@ -383,19 +397,22 @@
*/
if (len + 4 > server->packet_size)
{
- char * packet;
- pr_debug("smb_receive: Increase packet size from %d to %d\n",
- server->packet_size, len + 4);
+ int new_len = smb_round_length(len + 4);
+
+#ifdef SMBFS_PARANOIA
+printk("smb_receive: Increase packet size from %d to %d\n",
+server->packet_size, new_len);
+#endif
result = -ENOMEM;
- packet = smb_vmalloc(len + 4);
+ packet = smb_vmalloc(new_len);
if (packet == NULL)
goto out;
smb_vfree(server->packet);
server->packet = packet;
- server->packet_size = len + 4;
+ server->packet_size = new_len;
}
- memcpy(server->packet, peek_buf, 4);
- result = smb_receive_raw(socket, server->packet + 4, len);
+ memcpy(packet, peek_buf, 4);
+ result = smb_receive_raw(socket, packet + 4, len);
if (result < 0)
{
#ifdef SMBFS_DEBUG_VERBOSE
@@ -403,8 +420,8 @@
#endif
goto out;
}
- server->rcls = *(server->packet+9);
- server->err = WVAL(server->packet, 11);
+ server->rcls = *(packet+9);
+ server->err = WVAL(packet, 11);
#ifdef SMBFS_DEBUG_VERBOSE
if (server->rcls != 0)
@@ -415,136 +432,165 @@
}
/*
- * This routine needs a lot of work. We should check whether the packet
- * is all one part before allocating a new one, and should try first to
- * copy to a temp buffer before allocating.
- * The final server->packet should be the larger of the two.
+ * This routine checks first for "fast track" processing, as most
+ * packets won't need to be copied. Otherwise, it allocates a new
+ * packet to hold the incoming data.
+ *
+ * Note that the final server packet must be the larger of the two;
+ * server packets aren't allowed to shrink.
*/
static int
smb_receive_trans2(struct smb_sb_info *server,
int *ldata, unsigned char **data,
- int *lparam, unsigned char **param)
+ int *lparm, unsigned char **parm)
{
- int total_data = 0;
- int total_param = 0;
+ unsigned char *inbuf, *base, *rcv_buf = NULL;
+ unsigned int parm_disp, parm_offset, parm_count, parm_tot, parm_len = 0;
+ unsigned int data_disp, data_offset, data_count, data_tot, data_len = 0;
+ unsigned int total_p = 0, total_d = 0, buf_len = 0;
int result;
- unsigned char *rcv_buf;
- int buf_len;
- int data_len = 0;
- int param_len = 0;
-
- if ((result = smb_receive(server)) < 0)
- {
- return result;
- }
- if (server->rcls != 0)
- {
- *param = *data = server->packet;
- *ldata = *lparam = 0;
- return 0;
- }
- total_data = WVAL(server->packet, smb_tdrcnt);
- total_param = WVAL(server->packet, smb_tprcnt);
-
- pr_debug("smb_receive_trans2: td=%d,tp=%d\n", total_data, total_param);
-
- if ((total_data > TRANS2_MAX_TRANSFER)
- || (total_param > TRANS2_MAX_TRANSFER))
- {
- pr_debug("smb_receive_trans2: data/param too long\n");
- return -EIO;
- }
- buf_len = total_data + total_param;
- if (server->packet_size > buf_len)
- {
- buf_len = server->packet_size;
- }
- if ((rcv_buf = smb_vmalloc(buf_len)) == NULL)
- {
- pr_debug("smb_receive_trans2: could not alloc data area\n");
- return -ENOMEM;
- }
- *param = rcv_buf;
- *data = rcv_buf + total_param;
while (1)
{
- unsigned char *inbuf = server->packet;
-
- if (WVAL(inbuf, smb_prdisp) + WVAL(inbuf, smb_prcnt)
- > total_param)
- {
- pr_debug("smb_receive_trans2: invalid parameters\n");
- result = -EIO;
- goto fail;
- }
- memcpy(*param + WVAL(inbuf, smb_prdisp),
- smb_base(inbuf) + WVAL(inbuf, smb_proff),
- WVAL(inbuf, smb_prcnt));
- param_len += WVAL(inbuf, smb_prcnt);
-
- if (WVAL(inbuf, smb_drdisp) + WVAL(inbuf, smb_drcnt)
- > total_data)
- {
- pr_debug("smb_receive_trans2: invalid data block\n");
- result = -EIO;
- goto fail;
- }
- pr_debug("disp: %d, off: %d, cnt: %d\n",
- WVAL(inbuf, smb_drdisp), WVAL(inbuf, smb_droff),
- WVAL(inbuf, smb_drcnt));
-
- memcpy(*data + WVAL(inbuf, smb_drdisp),
- smb_base(inbuf) + WVAL(inbuf, smb_droff),
- WVAL(inbuf, smb_drcnt));
- data_len += WVAL(inbuf, smb_drcnt);
-
- if ((WVAL(inbuf, smb_tdrcnt) > total_data)
- || (WVAL(inbuf, smb_tprcnt) > total_param))
+ result = smb_receive(server);
+ if (result < 0)
+ goto out;
+ inbuf = server->packet;
+ if (server->rcls != 0)
{
- pr_debug("smb_receive_trans2: data/params grew!\n");
- result = -EIO;
- goto fail;
+ *parm = *data = inbuf;
+ *ldata = *lparm = 0;
+ goto out;
}
- /* the total lengths might shrink! */
- total_data = WVAL(inbuf, smb_tdrcnt);
- total_param = WVAL(inbuf, smb_tprcnt);
+ /*
+ * Extract the control data from the packet.
+ */
+ data_tot = WVAL(inbuf, smb_tdrcnt);
+ parm_tot = WVAL(inbuf, smb_tprcnt);
+ parm_disp = WVAL(inbuf, smb_prdisp);
+ parm_offset = WVAL(inbuf, smb_proff);
+ parm_count = WVAL(inbuf, smb_prcnt);
+ data_disp = WVAL(inbuf, smb_drdisp);
+ data_offset = WVAL(inbuf, smb_droff);
+ data_count = WVAL(inbuf, smb_drcnt);
+ base = smb_base(inbuf);
+
+ /*
+ * Assume success and increment lengths.
+ */
+ parm_len += parm_count;
+ data_len += data_count;
+
+ if (!rcv_buf)
+ {
+ /*
+ * Check for fast track processing ... just this packet.
+ */
+ if (parm_count == parm_tot && data_count == data_tot)
+ {
+#ifdef SMBFS_DEBUG_VERBOSE
+printk("smb_receive_trans2: fast track, parm=%u %u %u, data=%u %u %u\n",
+parm_disp, parm_offset, parm_count, data_disp, data_offset, data_count);
+#endif
+ *parm = base + parm_offset;
+ *data = base + data_offset;
+ goto success;
+ }
+
+ if (parm_tot > TRANS2_MAX_TRANSFER ||
+ data_tot > TRANS2_MAX_TRANSFER)
+ goto out_too_long;
+
+ /*
+ * Save the total parameter and data length.
+ */
+ total_d = data_tot;
+ total_p = parm_tot;
+
+ buf_len = total_d + total_p;
+ if (server->packet_size > buf_len)
+ buf_len = server->packet_size;
+ buf_len = smb_round_length(buf_len);
+
+ rcv_buf = smb_vmalloc(buf_len);
+ if (!rcv_buf)
+ goto out_no_mem;
+ *parm = rcv_buf;
+ *data = rcv_buf + total_p;
+ }
+ else if (data_tot > total_d || parm_tot > total_p)
+ goto out_data_grew;
+
+ if (parm_disp + parm_count > total_p)
+ goto out_bad_parm;
+ if (data_disp + data_count > total_d)
+ goto out_bad_data;
+ memcpy(*parm + parm_disp, base + parm_offset, parm_count);
+ memcpy(*data + data_disp, base + data_offset, data_count);
#ifdef SMBFS_PARANOIA
-if ((data_len >= total_data || param_len >= total_param) &&
- !(data_len >= total_data && param_len >= total_param))
-printk("smb_receive_trans2: dlen=%d, tdata=%d, plen=%d, tlen=%d\n",
-data_len, total_data, param_len, total_param);
+printk("smb_receive_trans2: copied, parm=%u of %u, data=%u of %u\n",
+parm_len, parm_tot, data_len, data_tot);
#endif
- /* shouldn't this be an OR test? don't want to overrun */
- if ((data_len >= total_data) && (param_len >= total_param))
- {
+ /*
+ * Check whether we've received all of the data. Note that
+ * we use the packet totals -- total lengths might shrink!
+ */
+ if (data_len >= data_tot && parm_len >= parm_tot)
break;
- }
- if ((result = smb_receive(server)) < 0)
- {
- goto fail;
- }
- result = -EIO;
- if (server->rcls != 0)
- goto fail;
}
- *ldata = data_len;
- *lparam = param_len;
+ /*
+ * Install the new packet. Note that it's possible, though
+ * unlikely, that the new packet could be smaller than the
+ * old one, in which case we just copy the data.
+ */
+ inbuf = server->packet;
+ if (buf_len >= server->packet_size)
+ {
+ server->packet_size = buf_len;
+ server->packet = rcv_buf;
+ rcv_buf = inbuf;
+ } else
+ {
#ifdef SMBFS_PARANOIA
-if (buf_len < server->packet_size)
-printk("smb_receive_trans2: changing packet, old size=%d, new size=%d\n",
+printk("smb_receive_trans2: copying data, old size=%d, new size=%u\n",
server->packet_size, buf_len);
#endif
- smb_vfree(server->packet);
- server->packet = rcv_buf;
- server->packet_size = buf_len;
- return 0;
+ memcpy(inbuf, rcv_buf, parm_len + data_len);
+ }
- fail:
- smb_vfree(rcv_buf);
+success:
+ *ldata = data_len;
+ *lparm = parm_len;
+out:
+ if (rcv_buf)
+ smb_vfree(rcv_buf);
return result;
+
+out_no_mem:
+#ifdef SMBFS_PARANOIA
+ printk("smb_receive_trans2: couldn't allocate data area\n");
+#endif
+ result = -ENOMEM;
+ goto out;
+out_too_long:
+ printk("smb_receive_trans2: data/param too long, data=%d, parm=%d\n",
+ data_tot, parm_tot);
+ goto out_error;
+out_data_grew:
+ printk("smb_receive_trans2: data/params grew!\n");
+ goto out_error;
+out_bad_parm:
+ printk("smb_receive_trans2: invalid parms, disp=%d, cnt=%d, tot=%d\n",
+ parm_disp, parm_count, parm_tot);
+ goto out_error;
+out_bad_data:
+ printk("smb_receive_trans2: invalid data, disp=%d, cnt=%d, tot=%d\n",
+ data_disp, data_count, data_tot);
+out_error:
+ result = -EIO;
+ goto out;
}
/*
@@ -759,14 +805,13 @@
}
if (result < 0)
goto bad_conn;
- pr_debug("smb_trans2_request: result = %d\n", result);
out:
return result;
bad_conn:
#ifdef SMBFS_PARANOIA
-printk("smb_trans2_request: connection bad, setting invalid\n");
+printk("smb_trans2_request: result=%d, setting invalid\n", result);
#endif
server->state = CONN_INVALID;
smb_invalidate_inodes(server);
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]