patch-2.1.71 linux/drivers/net/hamradio/soundmodem/sm.c

Next file: linux/drivers/net/hamradio/soundmodem/sm.h
Previous file: linux/drivers/net/hamradio/soundmodem/gentbl.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.70/linux/drivers/net/hamradio/soundmodem/sm.c linux/drivers/net/hamradio/soundmodem/sm.c
@@ -0,0 +1,898 @@
+/*****************************************************************************/
+
+/*
+ *	sm.c  -- soundcard radio modem driver.
+ *
+ *	Copyright (C) 1996  Thomas Sailer ([email protected])
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Please note that the GPL allows you to use the driver, NOT the radio.
+ *  In order to use the radio, you need a license from the communications
+ *  authority of your country.
+ *
+ *
+ *  Command line options (insmod command line)
+ *
+ *  mode     mode string; eg. "wss:afsk1200"
+ *  iobase   base address of the soundcard; common values are 0x220 for sbc,
+ *           0x530 for wss
+ *  irq      interrupt number; common values are 7 or 5 for sbc, 11 for wss
+ *  dma      dma number; common values are 0 or 1
+ *
+ *
+ *  History:
+ *   0.1  21.09.96  Started
+ *        18.10.96  Changed to new user space access routines (copy_{to,from}_user)
+ *   0.4  21.01.97  Separately compileable soundcard/modem modules
+ *   0.5  03.03.97  fixed LPT probing (check_lpt result was interpreted the wrong way round)
+ *   0.6  16.04.97  init code/data tagged
+ *   0.7  30.07.97  fixed halfduplex interrupt handlers/hotfix for CS423X
+ */
+
+/*****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/ioport.h>
+#include <linux/net.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include "sm.h"
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * currently this module is supposed to support both module styles, i.e.
+ * the old one present up to about 2.1.9, and the new one functioning
+ * starting with 2.1.21. The reason is I have a kit allowing to compile
+ * this module also under 2.0.x which was requested by several people.
+ * This will go in 2.2
+ */
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= 0x20100
+#include <asm/uaccess.h>
+#else
+#include <asm/segment.h>
+#include <linux/mm.h>
+
+#undef put_user
+#undef get_user
+
+#define put_user(x,ptr) ({ __put_user((unsigned long)(x),(ptr),sizeof(*(ptr))); 0; })
+#define get_user(x,ptr) ({ x = ((__typeof__(*(ptr)))__get_user((ptr),sizeof(*(ptr)))); 0; })
+
+extern inline int copy_from_user(void *to, const void *from, unsigned long n)
+{
+        int i = verify_area(VERIFY_READ, from, n);
+        if (i)
+                return i;
+        memcpy_fromfs(to, from, n);
+        return 0;
+}
+
+extern inline int copy_to_user(void *to, const void *from, unsigned long n)
+{
+        int i = verify_area(VERIFY_WRITE, to, n);
+        if (i)
+                return i;
+        memcpy_tofs(to, from, n);
+        return 0;
+}
+#endif
+
+#if LINUX_VERSION_CODE >= 0x20123
+#include <linux/init.h>
+#else
+#define __init
+#define __initdata
+#define __initfunc(x) x
+#endif
+
+/* --------------------------------------------------------------------- */
+
+/*static*/ const char sm_drvname[] = "soundmodem";
+static const char sm_drvinfo[] = KERN_INFO "soundmodem: (C) 1996-1997 Thomas Sailer, HB9JNX/AE4WA\n"
+KERN_INFO "soundmodem: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+
+/* --------------------------------------------------------------------- */
+
+/*static*/ const struct modem_tx_info *sm_modem_tx_table[] = {
+#ifdef CONFIG_SOUNDMODEM_AFSK1200
+	&sm_afsk1200_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
+	&sm_afsk2400_7_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
+	&sm_afsk2400_8_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2666
+	&sm_afsk2666_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
+#ifdef CONFIG_SOUNDMODEM_PSK4800
+	&sm_psk4800_tx,
+#endif /* CONFIG_SOUNDMODEM_PSK4800 */
+#ifdef CONFIG_SOUNDMODEM_HAPN4800
+	&sm_hapn4800_8_tx,
+	&sm_hapn4800_10_tx,
+	&sm_hapn4800_pm8_tx,
+	&sm_hapn4800_pm10_tx,
+#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
+#ifdef CONFIG_SOUNDMODEM_FSK9600
+	&sm_fsk9600_4_tx,
+	&sm_fsk9600_5_tx,
+#endif /* CONFIG_SOUNDMODEM_FSK9600 */
+	NULL
+};
+
+/*static*/ const struct modem_rx_info *sm_modem_rx_table[] = {
+#ifdef CONFIG_SOUNDMODEM_AFSK1200
+	&sm_afsk1200_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
+	&sm_afsk2400_7_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
+	&sm_afsk2400_8_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2666
+	&sm_afsk2666_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
+#ifdef CONFIG_SOUNDMODEM_PSK4800
+	&sm_psk4800_rx,
+#endif /* CONFIG_SOUNDMODEM_PSK4800 */
+#ifdef CONFIG_SOUNDMODEM_HAPN4800
+	&sm_hapn4800_8_rx,
+	&sm_hapn4800_10_rx,
+	&sm_hapn4800_pm8_rx,
+	&sm_hapn4800_pm10_rx,
+#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
+#ifdef CONFIG_SOUNDMODEM_FSK9600
+	&sm_fsk9600_4_rx,
+	&sm_fsk9600_5_rx,
+#endif /* CONFIG_SOUNDMODEM_FSK9600 */
+	NULL
+};
+
+static const struct hardware_info *sm_hardware_table[] = {
+#ifdef CONFIG_SOUNDMODEM_SBC
+	&sm_hw_sbc,
+	&sm_hw_sbcfdx,
+#endif /* CONFIG_SOUNDMODEM_SBC */
+#ifdef CONFIG_SOUNDMODEM_WSS
+	&sm_hw_wss,
+	&sm_hw_wssfdx,
+#endif /* CONFIG_SOUNDMODEM_WSS */
+	NULL
+};
+
+/* --------------------------------------------------------------------- */
+
+#define NR_PORTS 4
+
+/* --------------------------------------------------------------------- */
+
+static struct device sm_device[NR_PORTS];
+
+static struct {
+	char *mode;
+	int iobase, irq, dma, dma2, seriobase, pariobase, midiiobase;
+} sm_ports[NR_PORTS] = {
+	{ NULL, -1, 0, 0, 0, -1, -1, -1 },
+};
+
+/* --------------------------------------------------------------------- */
+
+#define UART_RBR(iobase) (iobase+0)
+#define UART_THR(iobase) (iobase+0)
+#define UART_IER(iobase) (iobase+1)
+#define UART_IIR(iobase) (iobase+2)
+#define UART_FCR(iobase) (iobase+2)
+#define UART_LCR(iobase) (iobase+3)
+#define UART_MCR(iobase) (iobase+4)
+#define UART_LSR(iobase) (iobase+5)
+#define UART_MSR(iobase) (iobase+6)
+#define UART_SCR(iobase) (iobase+7)
+#define UART_DLL(iobase) (iobase+0)
+#define UART_DLM(iobase) (iobase+1)
+
+#define SER_EXTENT 8
+
+#define LPT_DATA(iobase)    (iobase+0)
+#define LPT_STATUS(iobase)  (iobase+1)
+#define LPT_CONTROL(iobase) (iobase+2)
+#define LPT_IRQ_ENABLE      0x10
+
+#define LPT_EXTENT 3
+
+#define MIDI_DATA(iobase)     (iobase)
+#define MIDI_STATUS(iobase)   (iobase+1)
+#define MIDI_READ_FULL 0x80   /* attention: negative logic!! */
+#define MIDI_WRITE_EMPTY 0x40 /* attention: negative logic!! */
+
+#define MIDI_EXTENT 2
+
+/* ---------------------------------------------------------------------- */
+
+#define PARAM_TXDELAY   1
+#define PARAM_PERSIST   2
+#define PARAM_SLOTTIME  3
+#define PARAM_TXTAIL    4
+#define PARAM_FULLDUP   5
+#define PARAM_HARDWARE  6
+#define PARAM_RETURN    255
+
+#define SP_SER  1
+#define SP_PAR  2
+#define SP_MIDI 4
+
+/* --------------------------------------------------------------------- */
+/*
+ * ===================== port checking routines ========================
+ */
+
+/*
+ * returns 0 if ok and != 0 on error;
+ * the same behaviour as par96_check_lpt in baycom.c
+ */
+
+/*
+ * returns 0 if ok and != 0 on error;
+ * the same behaviour as par96_check_lpt in baycom.c
+ */
+
+static int check_lpt(unsigned int iobase)
+{
+	unsigned char b1,b2;
+	int i;
+
+	if (iobase <= 0 || iobase > 0x1000-LPT_EXTENT)
+		return 0;
+	if (check_region(iobase, LPT_EXTENT))
+		return 0;
+	b1 = inb(LPT_DATA(iobase));
+	b2 = inb(LPT_CONTROL(iobase));
+	outb(0xaa, LPT_DATA(iobase));
+	i = inb(LPT_DATA(iobase)) == 0xaa;
+	outb(0x55, LPT_DATA(iobase));
+	i &= inb(LPT_DATA(iobase)) == 0x55;
+	outb(0x0a, LPT_CONTROL(iobase));
+	i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x0a;
+	outb(0x05, LPT_CONTROL(iobase));
+	i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x05;
+	outb(b1, LPT_DATA(iobase));
+	outb(b2, LPT_CONTROL(iobase));
+	return !i;
+}
+
+/* --------------------------------------------------------------------- */
+
+enum uart { c_uart_unknown, c_uart_8250,
+	c_uart_16450, c_uart_16550, c_uart_16550A};
+static const char *uart_str[] =
+	{ "unknown", "8250", "16450", "16550", "16550A" };
+
+static enum uart check_uart(unsigned int iobase)
+{
+	unsigned char b1,b2,b3;
+	enum uart u;
+	enum uart uart_tab[] =
+		{ c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A };
+
+	if (iobase <= 0 || iobase > 0x1000-SER_EXTENT)
+		return c_uart_unknown;
+	if (check_region(iobase, SER_EXTENT))
+		return c_uart_unknown;
+	b1 = inb(UART_MCR(iobase));
+	outb(b1 | 0x10, UART_MCR(iobase));	/* loopback mode */
+	b2 = inb(UART_MSR(iobase));
+	outb(0x1a, UART_MCR(iobase));
+	b3 = inb(UART_MSR(iobase)) & 0xf0;
+	outb(b1, UART_MCR(iobase));	   /* restore old values */
+	outb(b2, UART_MSR(iobase));
+	if (b3 != 0x90)
+		return c_uart_unknown;
+	inb(UART_RBR(iobase));
+	inb(UART_RBR(iobase));
+	outb(0x01, UART_FCR(iobase));		/* enable FIFOs */
+	u = uart_tab[(inb(UART_IIR(iobase)) >> 6) & 3];
+	if (u == c_uart_16450) {
+		outb(0x5a, UART_SCR(iobase));
+		b1 = inb(UART_SCR(iobase));
+		outb(0xa5, UART_SCR(iobase));
+		b2 = inb(UART_SCR(iobase));
+		if ((b1 != 0x5a) || (b2 != 0xa5))
+			u = c_uart_8250;
+	}
+	return u;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int check_midi(unsigned int iobase)
+{
+	unsigned long timeout;
+	unsigned long flags;
+	unsigned char b;
+
+	if (iobase <= 0 || iobase > 0x1000-MIDI_EXTENT)
+		return 0;
+	if (check_region(iobase, MIDI_EXTENT))
+		return 0;
+	timeout = jiffies + (HZ / 100);
+	while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
+		if ((signed)(jiffies - timeout) > 0)
+			return 0;
+	save_flags(flags);
+	cli();
+	outb(0xff, MIDI_DATA(iobase));
+	b = inb(MIDI_STATUS(iobase));
+	restore_flags(flags);
+	if (!(b & MIDI_WRITE_EMPTY))
+		return 0;
+	while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
+		if ((signed)(jiffies - timeout) > 0)
+			return 0;
+	return 1;
+}
+
+/* --------------------------------------------------------------------- */
+
+void sm_output_status(struct sm_state *sm)
+{
+	int invert_dcd = 0;
+	int invert_ptt = 0;
+
+	int ptt = /*hdlcdrv_ptt(&sm->hdrv)*/(sm->dma.ptt_cnt > 0) ^ invert_ptt;
+	int dcd = (!!sm->hdrv.hdlcrx.dcd) ^ invert_dcd;
+
+	if (sm->hdrv.ptt_out.flags & SP_SER) {
+		outb(dcd | (ptt << 1), UART_MCR(sm->hdrv.ptt_out.seriobase));
+		outb(0x40 & (-ptt), UART_LCR(sm->hdrv.ptt_out.seriobase));
+	}
+	if (sm->hdrv.ptt_out.flags & SP_PAR) {
+		outb(ptt | (dcd << 1), LPT_DATA(sm->hdrv.ptt_out.pariobase));
+	}
+	if (sm->hdrv.ptt_out.flags & SP_MIDI && hdlcdrv_ptt(&sm->hdrv)) {
+		outb(0, MIDI_DATA(sm->hdrv.ptt_out.midiiobase));
+	}
+}
+
+/* --------------------------------------------------------------------- */
+
+static void sm_output_open(struct sm_state *sm)
+{
+	enum uart u = c_uart_unknown;
+
+	sm->hdrv.ptt_out.flags = 0;
+	if (sm->hdrv.ptt_out.seriobase > 0 &&
+	    sm->hdrv.ptt_out.seriobase <= 0x1000-SER_EXTENT &&
+	    ((u = check_uart(sm->hdrv.ptt_out.seriobase))) != c_uart_unknown) {
+		sm->hdrv.ptt_out.flags |= SP_SER;
+		request_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT, "sm ser ptt");
+		outb(0, UART_IER(sm->hdrv.ptt_out.seriobase));
+		/* 5 bits, 1 stop, no parity, no break, Div latch access */
+		outb(0x80, UART_LCR(sm->hdrv.ptt_out.seriobase));
+		outb(0, UART_DLM(sm->hdrv.ptt_out.seriobase));
+		outb(1, UART_DLL(sm->hdrv.ptt_out.seriobase)); /* as fast as possible */
+		/* LCR and MCR set by output_status */
+	}
+	if (sm->hdrv.ptt_out.pariobase > 0 &&
+	    sm->hdrv.ptt_out.pariobase <= 0x1000-LPT_EXTENT &&
+	    !check_lpt(sm->hdrv.ptt_out.pariobase)) {
+		sm->hdrv.ptt_out.flags |= SP_PAR;
+		request_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT, "sm par ptt");
+	}
+	if (sm->hdrv.ptt_out.midiiobase > 0 &&
+	    sm->hdrv.ptt_out.midiiobase <= 0x1000-MIDI_EXTENT &&
+	    check_midi(sm->hdrv.ptt_out.midiiobase)) {
+		sm->hdrv.ptt_out.flags |= SP_MIDI;
+		request_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT,
+			       "sm midi ptt");
+	}
+	sm_output_status(sm);
+
+	printk(KERN_INFO "%s: ptt output:", sm_drvname);
+	if (sm->hdrv.ptt_out.flags & SP_SER)
+		printk(" serial interface at 0x%x, uart %s", sm->hdrv.ptt_out.seriobase,
+		       uart_str[u]);
+	if (sm->hdrv.ptt_out.flags & SP_PAR)
+		printk(" parallel interface at 0x%x", sm->hdrv.ptt_out.pariobase);
+	if (sm->hdrv.ptt_out.flags & SP_MIDI)
+		printk(" mpu401 (midi) interface at 0x%x", sm->hdrv.ptt_out.midiiobase);
+	if (!sm->hdrv.ptt_out.flags)
+		printk(" none");
+	printk("\n");
+}
+
+/* --------------------------------------------------------------------- */
+
+static void sm_output_close(struct sm_state *sm)
+{
+	/* release regions used for PTT output */
+	sm->hdrv.hdlctx.ptt = sm->hdrv.hdlctx.calibrate = 0;
+	sm_output_status(sm);
+	if (sm->hdrv.ptt_out.flags & SP_SER)
+		release_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT);
+       	if (sm->hdrv.ptt_out.flags & SP_PAR)
+		release_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT);
+       	if (sm->hdrv.ptt_out.flags & SP_MIDI)
+		release_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT);
+	sm->hdrv.ptt_out.flags = 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_open(struct device *dev);
+static int sm_close(struct device *dev);
+static int sm_ioctl(struct device *dev, struct ifreq *ifr,
+		    struct hdlcdrv_ioctl *hi, int cmd);
+
+/* --------------------------------------------------------------------- */
+
+static const struct hdlcdrv_ops sm_ops = {
+	sm_drvname, sm_drvinfo, sm_open, sm_close, sm_ioctl
+};
+
+/* --------------------------------------------------------------------- */
+
+static int sm_open(struct device *dev)
+{
+	struct sm_state *sm;
+	int err;
+
+	if (!dev || !dev->priv ||
+	    ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+		printk(KERN_ERR "sm_open: invalid device struct\n");
+		return -EINVAL;
+	}
+	sm = (struct sm_state *)dev->priv;
+
+	if (!sm->mode_tx || !sm->mode_rx || !sm->hwdrv || !sm->hwdrv->open)
+		return -ENODEV;
+	sm->hdrv.par.bitrate = sm->mode_rx->bitrate;
+	err = sm->hwdrv->open(dev, sm);
+	if (err)
+		return err;
+	sm_output_open(sm);
+	MOD_INC_USE_COUNT;
+	printk(KERN_INFO "%s: %s mode %s.%s at iobase 0x%lx irq %u dma %u dma2 %u\n",
+	       sm_drvname, sm->hwdrv->hw_name, sm->mode_tx->name,
+	       sm->mode_rx->name, dev->base_addr, dev->irq, dev->dma, sm->hdrv.ptt_out.dma2);
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_close(struct device *dev)
+{
+	struct sm_state *sm;
+	int err = -ENODEV;
+
+	if (!dev || !dev->priv ||
+	    ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+		printk(KERN_ERR "sm_close: invalid device struct\n");
+		return -EINVAL;
+	}
+	sm = (struct sm_state *)dev->priv;
+
+
+	if (sm->hwdrv && sm->hwdrv->close)
+		err = sm->hwdrv && sm->hwdrv->close(dev, sm);
+	sm_output_close(sm);
+	MOD_DEC_USE_COUNT;
+	printk(KERN_INFO "%s: close %s at iobase 0x%lx irq %u dma %u\n",
+	       sm_drvname, sm->hwdrv->hw_name, dev->base_addr, dev->irq, dev->dma);
+	return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sethw(struct device *dev, struct sm_state *sm, char *mode)
+{
+	char *cp = strchr(mode, ':');
+	const struct hardware_info **hwp = sm_hardware_table;
+
+	if (!cp)
+		cp = mode;
+	else {
+		*cp++ = '\0';
+		while (hwp && (*hwp) && (*hwp)->hw_name && strcmp((*hwp)->hw_name, mode))
+			hwp++;
+		if (!hwp || !*hwp || !(*hwp)->hw_name)
+			return -EINVAL;
+		if ((*hwp)->loc_storage > sizeof(sm->hw)) {
+			printk(KERN_ERR "%s: insufficient storage for hw driver %s (%d)\n",
+			       sm_drvname, (*hwp)->hw_name, (*hwp)->loc_storage);
+			return -EINVAL;
+		}
+		sm->hwdrv = *hwp;
+	}
+	if (!*cp)
+		return 0;
+	if (sm->hwdrv && sm->hwdrv->sethw)
+		return sm->hwdrv->sethw(dev, sm, cp);
+	return -EINVAL;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_ioctl(struct device *dev, struct ifreq *ifr,
+		    struct hdlcdrv_ioctl *hi, int cmd)
+{
+	struct sm_state *sm;
+	struct sm_ioctl bi;
+	unsigned long flags;
+	unsigned int newdiagmode;
+	unsigned int newdiagflags;
+	char *cp;
+	const struct modem_tx_info **mtp = sm_modem_tx_table;
+	const struct modem_rx_info **mrp = sm_modem_rx_table;
+	const struct hardware_info **hwp = sm_hardware_table;
+
+	if (!dev || !dev->priv ||
+	    ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+		printk(KERN_ERR "sm_ioctl: invalid device struct\n");
+		return -EINVAL;
+	}
+	sm = (struct sm_state *)dev->priv;
+
+	if (cmd != SIOCDEVPRIVATE) {
+		if (!sm->hwdrv || !sm->hwdrv->ioctl)
+			return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
+		return -ENOIOCTLCMD;
+	}
+	switch (hi->cmd) {
+	default:
+		if (sm->hwdrv && sm->hwdrv->ioctl)
+			return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
+		return -ENOIOCTLCMD;
+
+	case HDLCDRVCTL_GETMODE:
+		cp = hi->data.modename;
+		if (sm->hwdrv && sm->hwdrv->hw_name)
+			cp += sprintf(cp, "%s:", sm->hwdrv->hw_name);
+		else
+			cp += sprintf(cp, "<unspec>:");
+		if (sm->mode_tx && sm->mode_tx->name)
+			cp += sprintf(cp, "%s", sm->mode_tx->name);
+		else
+			cp += sprintf(cp, "<unspec>");
+		if (!sm->mode_rx || !sm->mode_rx ||
+		    strcmp(sm->mode_rx->name, sm->mode_tx->name)) {
+			if (sm->mode_rx && sm->mode_rx->name)
+				cp += sprintf(cp, ",%s", sm->mode_rx->name);
+			else
+				cp += sprintf(cp, ",<unspec>");
+		}
+		if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
+			return -EFAULT;
+		return 0;
+
+	case HDLCDRVCTL_SETMODE:
+		if (!suser() || dev->start)
+			return -EACCES;
+		hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
+		return sethw(dev, sm, hi->data.modename);
+
+	case HDLCDRVCTL_MODELIST:
+		cp = hi->data.modename;
+		while (*hwp) {
+			if ((*hwp)->hw_name)
+				cp += sprintf("%s:,", (*hwp)->hw_name);
+			hwp++;
+		}
+		while (*mtp) {
+			if ((*mtp)->name)
+				cp += sprintf(">%s,", (*mtp)->name);
+			mtp++;
+		}
+		while (*mrp) {
+			if ((*mrp)->name)
+				cp += sprintf("<%s,", (*mrp)->name);
+			mrp++;
+		}
+		cp[-1] = '\0';
+		if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
+			return -EFAULT;
+		return 0;
+
+#ifdef SM_DEBUG
+	case SMCTL_GETDEBUG:
+		if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+			return -EFAULT;
+		bi.data.dbg.int_rate = sm->debug_vals.last_intcnt;
+		bi.data.dbg.mod_cycles = sm->debug_vals.mod_cyc;
+		bi.data.dbg.demod_cycles = sm->debug_vals.demod_cyc;
+		bi.data.dbg.dma_residue = sm->debug_vals.dma_residue;
+		sm->debug_vals.mod_cyc = sm->debug_vals.demod_cyc =
+			sm->debug_vals.dma_residue = 0;
+		if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+			return -EFAULT;
+		return 0;
+#endif /* SM_DEBUG */
+
+	case SMCTL_DIAGNOSE:
+		if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+			return -EFAULT;
+		newdiagmode = bi.data.diag.mode;
+		newdiagflags = bi.data.diag.flags;
+		if (newdiagmode > SM_DIAGMODE_CONSTELLATION)
+			return -EINVAL;
+		bi.data.diag.mode = sm->diag.mode;
+		bi.data.diag.flags = sm->diag.flags;
+		bi.data.diag.samplesperbit = sm->mode_rx->sperbit;
+		if (sm->diag.mode != newdiagmode) {
+			save_flags(flags);
+			cli();
+			sm->diag.ptr = -1;
+			sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
+			sm->diag.mode = newdiagmode;
+			restore_flags(flags);
+			if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+				return -EFAULT;
+			return 0;
+		}
+		if (sm->diag.ptr < 0 || sm->diag.mode == SM_DIAGMODE_OFF) {
+			if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+				return -EFAULT;
+			return 0;
+		}
+		if (bi.data.diag.datalen > DIAGDATALEN)
+			bi.data.diag.datalen = DIAGDATALEN;
+		if (sm->diag.ptr < bi.data.diag.datalen) {
+			if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+				return -EFAULT;
+			return 0;
+		}
+		if (copy_to_user(bi.data.diag.data, sm->diag.data,
+				 bi.data.diag.datalen * sizeof(short)))
+			return -EFAULT;
+		bi.data.diag.flags |= SM_DIAGFLAG_VALID;
+		save_flags(flags);
+		cli();
+		sm->diag.ptr = -1;
+		sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
+		sm->diag.mode = newdiagmode;
+		restore_flags(flags);
+		if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+			return -EFAULT;
+		return 0;
+	}
+}
+
+/* --------------------------------------------------------------------- */
+
+#ifdef __i386__
+
+int sm_x86_capability = 0;
+
+__initfunc(static void i386_capability(void))
+{
+	unsigned long flags;
+	unsigned long fl1;
+	union {
+		struct {
+			unsigned int ebx, edx, ecx;
+		} r;
+		unsigned char s[13];
+	} id;
+	unsigned int eax;
+
+	save_flags(flags);
+	flags |= 0x200000;
+	restore_flags(flags);
+	save_flags(flags);
+	fl1 = flags;
+	flags &= ~0x200000;
+	restore_flags(flags);
+	save_flags(flags);
+	if (!(fl1 & 0x200000) || (flags & 0x200000)) {
+		printk(KERN_WARNING "%s: cpu does not support CPUID\n", sm_drvname);
+		return;
+	}
+	__asm__ ("cpuid" : "=a" (eax), "=b" (id.r.ebx), "=c" (id.r.ecx), "=d" (id.r.edx) :
+		 "0" (0));
+	id.s[12] = 0;
+	if (eax < 1) {
+		printk(KERN_WARNING "%s: cpu (vendor string %s) does not support capability "
+		       "list\n", sm_drvname, id.s);
+		return;
+	}
+	printk(KERN_INFO "%s: cpu: vendor string %s ", sm_drvname, id.s);
+	__asm__ ("cpuid" : "=a" (eax), "=d" (sm_x86_capability) : "0" (1) : "ebx", "ecx");
+	printk("fam %d mdl %d step %d cap 0x%x\n", (eax >> 8) & 15, (eax >> 4) & 15,
+	       eax & 15, sm_x86_capability);
+}	
+#endif /* __i386__ */	
+
+/* --------------------------------------------------------------------- */
+
+#ifdef MODULE
+__initfunc(static int sm_init(void))
+#else /* MODULE */
+__initfunc(int sm_init(void))
+#endif /* MODULE */
+{
+	int i, j, found = 0;
+	char set_hw = 1;
+	struct sm_state *sm;
+	char ifname[HDLCDRV_IFNAMELEN];
+
+	printk(sm_drvinfo);
+#ifdef __i386__
+	i386_capability();
+#endif /* __i386__ */	
+	/*
+	 * register net devices
+	 */
+	for (i = 0; i < NR_PORTS; i++) {
+		struct device *dev = sm_device+i;
+		sprintf(ifname, "sm%d", i);
+
+		if (!sm_ports[i].mode)
+			set_hw = 0;
+		if (!set_hw)
+			sm_ports[i].iobase = sm_ports[i].irq = 0;
+		j = hdlcdrv_register_hdlcdrv(dev, &sm_ops, sizeof(struct sm_state),
+					     ifname, sm_ports[i].iobase,
+					     sm_ports[i].irq, sm_ports[i].dma);
+		if (!j) {
+			sm = (struct sm_state *)dev->priv;
+			sm->hdrv.ptt_out.dma2 = sm_ports[i].dma2;
+			sm->hdrv.ptt_out.seriobase = sm_ports[i].seriobase;
+			sm->hdrv.ptt_out.pariobase = sm_ports[i].pariobase;
+			sm->hdrv.ptt_out.midiiobase = sm_ports[i].midiiobase;
+			if (set_hw && sethw(dev, sm, sm_ports[i].mode))
+				set_hw = 0;
+			found++;
+		} else {
+			printk(KERN_WARNING "%s: cannot register net device\n",
+			       sm_drvname);
+		}
+	}
+	if (!found)
+		return -ENXIO;
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+#ifdef MODULE
+
+/*
+ * command line settable parameters
+ */
+static char *mode = NULL;
+static int iobase = -1;
+static int irq = -1;
+static int dma = -1;
+static int dma2 = -1;
+static int serio = 0;
+static int pario = 0;
+static int midiio = 0;
+
+#if LINUX_VERSION_CODE >= 0x20115
+
+MODULE_PARM(mode, "s");
+MODULE_PARM_DESC(mode, "soundmodem operating mode; eg. sbc:afsk1200 or wss:fsk9600");
+MODULE_PARM(iobase, "i");
+MODULE_PARM_DESC(iobase, "soundmodem base address");
+MODULE_PARM(irq, "i");
+MODULE_PARM_DESC(irq, "soundmodem interrupt");
+MODULE_PARM(dma, "i");
+MODULE_PARM_DESC(dma, "soundmodem dma channel");
+MODULE_PARM(dma2, "i");
+MODULE_PARM_DESC(dma2, "soundmodem 2nd dma channel; full duplex only");
+MODULE_PARM(serio, "i");
+MODULE_PARM_DESC(serio, "soundmodem PTT output on serial port");
+MODULE_PARM(pario, "i");
+MODULE_PARM_DESC(pario, "soundmodem PTT output on parallel port");
+MODULE_PARM(midiio, "i");
+MODULE_PARM_DESC(midiio, "soundmodem PTT output on midi port");
+
+MODULE_AUTHOR("Thomas M. Sailer, [email protected], [email protected]");
+MODULE_DESCRIPTION("Soundcard amateur radio modem driver");
+
+#endif
+
+__initfunc(int init_module(void))
+{
+	if (mode) {
+		if (iobase == -1)
+			iobase = (!strncmp(mode, "sbc", 3)) ? 0x220 : 0x530;
+		if (irq == -1)
+			irq = (!strncmp(mode, "sbc", 3)) ? 5 : 11;
+		if (dma == -1)
+			dma = 1;
+	}
+	sm_ports[0].mode = mode;
+	sm_ports[0].iobase = iobase;
+	sm_ports[0].irq = irq;
+	sm_ports[0].dma = dma;
+	sm_ports[0].dma2 = dma2;
+	sm_ports[0].seriobase = serio;
+	sm_ports[0].pariobase = pario;
+	sm_ports[0].midiiobase = midiio;
+	sm_ports[1].mode = NULL;
+
+	return sm_init();
+}
+
+/* --------------------------------------------------------------------- */
+
+void cleanup_module(void)
+{
+	int i;
+
+	printk(KERN_INFO "sm: cleanup_module called\n");
+
+	for(i = 0; i < NR_PORTS; i++) {
+		struct device *dev = sm_device+i;
+		struct sm_state *sm = (struct sm_state *)dev->priv;
+
+		if (sm) {
+			if (sm->hdrv.magic != HDLCDRV_MAGIC)
+				printk(KERN_ERR "sm: invalid magic in "
+				       "cleanup_module\n");
+			else
+				hdlcdrv_unregister_hdlcdrv(dev);
+		}
+	}
+}
+
+#else /* MODULE */
+/* --------------------------------------------------------------------- */
+/*
+ * format: sm=io,irq,dma[,dma2[,serio[,pario]]],mode
+ * mode: hw:modem
+ * hw: sbc, wss, wssfdx
+ * modem: afsk1200, fsk9600
+ */
+
+__initfunc(void sm_setup(char *str, int *ints))
+{
+	int i;
+
+	for (i = 0; (i < NR_PORTS) && (sm_ports[i].mode); i++);
+	if ((i >= NR_PORTS) || (ints[0] < 3)) {
+		printk(KERN_INFO "%s: too many or invalid interface "
+		       "specifications\n", sm_drvname);
+		return;
+	}
+	sm_ports[i].mode = str;
+	sm_ports[i].iobase = ints[1];
+	sm_ports[i].irq = ints[2];
+	sm_ports[i].dma = ints[3];
+	sm_ports[i].dma2 = (ints[0] >= 4) ? ints[4] : 0;
+	sm_ports[i].seriobase = (ints[0] >= 5) ? ints[5] : 0;
+	sm_ports[i].pariobase = (ints[0] >= 6) ? ints[6] : 0;
+	sm_ports[i].midiiobase = (ints[0] >= 7) ? ints[7] : 0;
+	if (i < NR_PORTS-1)
+		sm_ports[i+1].mode = NULL;
+}
+
+#endif /* MODULE */
+/* --------------------------------------------------------------------- */
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen, [email protected]