patch-2.3.35 linux/arch/sparc/kernel/pcic.c
Next file: linux/arch/sparc/kernel/process.c
Previous file: linux/arch/sparc/kernel/irq.c
Back to the patch index
Back to the overall index
- Lines: 887
- Date:
Mon Dec 20 22:05:52 1999
- Orig file:
v2.3.34/linux/arch/sparc/kernel/pcic.c
- Orig date:
Tue Aug 31 17:29:13 1999
diff -u --recursive --new-file v2.3.34/linux/arch/sparc/kernel/pcic.c linux/arch/sparc/kernel/pcic.c
@@ -1,4 +1,4 @@
-/* $Id: pcic.c,v 1.8 1999/08/31 06:54:22 davem Exp $
+/* $Id: pcic.c,v 1.11 1999/11/25 05:22:05 zaitcev Exp $
* pcic.c: Sparc/PCI controller support
*
* Copyright (C) 1998 V. Roganov and G. Raiko
@@ -22,17 +22,6 @@
#include <asm/swift.h> /* for cache flushing. */
#include <asm/io.h>
-#undef PROM_DEBUG
-#undef FIXUP_REGS_DEBUG
-#undef FIXUP_IRQ_DEBUG
-#undef FIXUP_VMA_DEBUG
-
-#ifdef PROM_DEBUG
-#define dprintf prom_printf
-#else
-#define dprintf printk
-#endif
-
#include <linux/ctype.h>
#include <linux/pci.h>
#include <linux/timex.h>
@@ -57,7 +46,7 @@
unsigned long len,
unsigned char *buf)
{
- return 0;
+ return -EINVAL;
}
asmlinkage int sys_pciconfig_write(unsigned long bus,
@@ -66,11 +55,19 @@
unsigned long len,
unsigned char *buf)
{
- return 0;
+ return -EINVAL;
}
#else
+#ifdef CONFIG_SUN_JSFLASH
+extern int jsflash_init(void);
+#endif
+
+struct pci_fixup pcibios_fixups[] = {
+ { 0 }
+};
+
unsigned int pcic_pin_to_irq(unsigned int pin, char *name);
/*
@@ -120,7 +117,8 @@
{ 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
{ 0, 0x01, 1, 6, 0 }, /* hme */
{ 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */
- { 0, 0x18, 6, 8, 0 }, /* PCI INTA# in Slot 1 */
+ { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */
+ { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */
{ 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */
{ 0, 0x80, 5, 11, 0 }, /* EIDE */
/* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */
@@ -144,6 +142,16 @@
};
/*
+ * Krups (courtesy of Varol Kaptan)
+ * No documentation available, so we guess it, based on Espresso layout.
+ * Since we always run PROLL on Krups we may put map in there.
+ */
+static struct pcic_ca2irq pcic_i_jk[] = {
+ { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
+ { 0, 0x01, 1, 6, 0 }, /* hme */
+};
+
+/*
* Several entries in this list may point to the same routing map
* as several PROMs may be installed on the same physical board.
*/
@@ -154,11 +162,17 @@
SN2L_INIT("JE-1-name", pcic_i_je1), /* XXX Gleb, put name here, pls */
SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */
SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */
+ SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */
+ SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */
{ NULL, NULL, 0 }
};
-static struct linux_pcic PCIC;
-static struct linux_pcic *pcic = NULL;
+/*
+ * Only one PCIC per IIep,
+ * and since we have no SMP IIep, only one per system.
+ */
+static int pcic0_up = 0;
+static struct linux_pcic pcic0;
unsigned int pcic_regs;
volatile int pcic_speculative;
@@ -167,23 +181,144 @@
static void pci_do_gettimeofday(struct timeval *tv);
static void pci_do_settimeofday(struct timeval *tv);
-void __init pcic_probe(void)
+#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
+
+static int pcic_read_config_dword(struct pci_dev *dev, int where, u32 *value);
+static int pcic_write_config_dword(struct pci_dev *dev, int where, u32 value);
+
+static int pcic_read_config_byte(struct pci_dev *dev, int where, u8 *value)
+{
+ unsigned int v;
+
+ pcic_read_config_dword(dev, where&~3, &v);
+ *value = 0xff & (v >> (8*(where & 3)));
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcic_read_config_word(struct pci_dev *dev, int where, u16 *value)
+{
+ unsigned int v;
+ if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ pcic_read_config_dword(dev, where&~3, &v);
+ *value = 0xffff & (v >> (8*(where & 3)));
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcic_read_config_dword(struct pci_dev *dev, int where, u32 *value)
{
+ unsigned char bus = dev->bus->number;
+ unsigned char device_fn = dev->devfn;
+ /* unsigned char where; */
+
+ struct linux_pcic *pcic;
+ unsigned long flags;
+
+ if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
+ if (bus != 0) return PCIBIOS_DEVICE_NOT_FOUND;
+ pcic = &pcic0;
+
+ save_and_cli(flags);
+#if 0 /* does not fail here */
+ pcic_speculative = 1;
+ pcic_trapped = 0;
+#endif
+ writel(CONFIG_CMD(bus,device_fn,where), pcic->pcic_config_space_addr);
+#if 0 /* does not fail here */
+ nop();
+ if (pcic_trapped) {
+ restore_flags(flags);
+ *value = ~0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+#endif
+ pcic_speculative = 2;
+ pcic_trapped = 0;
+ *value = readl(pcic->pcic_config_space_data + (where&4));
+ nop();
+ if (pcic_trapped) {
+ pcic_speculative = 0;
+ restore_flags(flags);
+ *value = ~0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+ pcic_speculative = 0;
+ restore_flags(flags);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcic_write_config_byte(struct pci_dev *dev, int where, u8 value)
+{
+ unsigned int v;
+
+ pcic_read_config_dword(dev, where&~3, &v);
+ v = (v & ~(0xff << (8*(where&3)))) |
+ ((0xff&(unsigned)value) << (8*(where&3)));
+ return pcic_write_config_dword(dev, where&~3, v);
+}
+
+static int pcic_write_config_word(struct pci_dev *dev, int where, u16 value)
+{
+ unsigned int v;
+
+ if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
+ pcic_read_config_dword(dev, where&~3, &v);
+ v = (v & ~(0xffff << (8*(where&3)))) |
+ ((0xffff&(unsigned)value) << (8*(where&3)));
+ return pcic_write_config_dword(dev, where&~3, v);
+}
+
+static int pcic_write_config_dword(struct pci_dev *dev, int where, u32 value)
+{
+ unsigned char bus = dev->bus->number;
+ unsigned char devfn = dev->devfn;
+ struct linux_pcic *pcic;
+ unsigned long flags;
+
+ if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
+ if (bus != 0) return PCIBIOS_DEVICE_NOT_FOUND;
+ pcic = &pcic0;
+
+ save_and_cli(flags);
+ writel(CONFIG_CMD(bus,devfn,where), pcic->pcic_config_space_addr);
+ writel(value, pcic->pcic_config_space_data + (where&4));
+ restore_flags(flags);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pcic_ops = {
+ pcic_read_config_byte,
+ pcic_read_config_word,
+ pcic_read_config_dword,
+ pcic_write_config_byte,
+ pcic_write_config_word,
+ pcic_write_config_dword,
+};
+
+/*
+ * On sparc64 pcibios_init() calls pci_controller_probe().
+ * We want PCIC probed little ahead so that interrupt controller
+ * would be operational.
+ */
+int __init pcic_probe(void)
+{
+ struct linux_pcic *pcic;
struct linux_prom_registers regs[PROMREG_MAX];
struct linux_pbm_info* pbm;
char namebuf[64];
int node;
int err;
- if (pcibios_present()) {
+ if (pcic0_up) {
prom_printf("PCIC: called twice!\n");
prom_halt();
}
+ pcic = &pcic0;
node = prom_getchild (prom_root_node);
node = prom_searchsiblings (node, "pci");
if (node == 0)
- return;
+ return -ENODEV;
/*
* Map in PCIC register set, config space, and IO base
*/
@@ -193,31 +328,27 @@
"from PROM.\n");
prom_halt();
}
-
- pcic = &PCIC;
- pcic->pcic_regs = (unsigned long)sparc_alloc_io(regs[0].phys_addr, NULL,
- regs[0].reg_size,
- "PCIC Registers", 0, 0);
+ pcic0_up = 1;
+
+ pcic->pcic_res_regs.name = "pcic_registers";
+ pcic->pcic_regs = (unsigned long)
+ ioremap(regs[0].phys_addr, regs[0].reg_size);
if (!pcic->pcic_regs) {
prom_printf("PCIC: Error, cannot map PCIC registers.\n");
prom_halt();
}
- pcic->pcic_io_phys = regs[1].phys_addr;
- pcic->pcic_io = (unsigned long)sparc_alloc_io(regs[1].phys_addr, NULL,
- regs[1].reg_size,
- "PCIC IO Base", 0, 0);
- if (pcic->pcic_io == 0UL) {
+ pcic->pcic_res_io.name = "pcic_io";
+ if ((pcic->pcic_io = (unsigned long)
+ ioremap(regs[1].phys_addr, 0x10000)) == 0) {
prom_printf("PCIC: Error, cannot map PCIC IO Base.\n");
prom_halt();
}
- pcic->pcic_config_space_addr =
- (unsigned long)sparc_alloc_io (regs[2].phys_addr, NULL,
- regs[2].reg_size * 2,
- "PCI Config Space Address", 0, 0);
- if (pcic->pcic_config_space_addr == 0UL) {
+ pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
+ if ((pcic->pcic_config_space_addr = (unsigned long)
+ ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) {
prom_printf("PCIC: Error, cannot map"
"PCI Configuration Space Address.\n");
prom_halt();
@@ -227,11 +358,9 @@
* Docs say three least significant bits in address and data
* must be the same. Thus, we need adjust size of data.
*/
- pcic->pcic_config_space_data =
- (unsigned long)sparc_alloc_io (regs[3].phys_addr, NULL,
- regs[3].reg_size * 2,
- "PCI Config Space Data", 0, 0);
- if (pcic->pcic_config_space_data == 0UL) {
+ pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
+ if ((pcic->pcic_config_space_data = (unsigned long)
+ ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) {
prom_printf("PCIC: Error, cannot map"
"PCI Configuration Space Data.\n");
prom_halt();
@@ -239,7 +368,7 @@
pbm = &pcic->pbm;
pbm->prom_node = node;
- prom_getstring(node, "name", namebuf, sizeof(namebuf));
+ prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
strcpy(pbm->prom_name, namebuf);
{
@@ -254,7 +383,7 @@
pcic_regs = pcic->pcic_regs;
}
- prom_getstring(prom_root_node, "name", namebuf, sizeof(namebuf));
+ prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0;
{
struct pcic_sn2list *p;
@@ -272,21 +401,37 @@
printk("PCIC: System %s is unknown, cannot route interrupts\n",
namebuf);
}
+
+ return 0;
+}
+
+static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
+{
+ struct linux_pbm_info *pbm = &pcic->pbm;
+
+ pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm);
+#if 0 /* deadwood transplanted from sparc64 */
+ pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
+ pci_record_assignments(pbm, pbm->pci_bus);
+ pci_assign_unassigned(pbm, pbm->pci_bus);
+ pci_fixup_irq(pbm, pbm->pci_bus);
+#endif
}
+/*
+ * Main entry point from the PCI subsystem.
+ */
void __init pcibios_init(void)
{
+ struct linux_pcic *pcic;
+
/*
* PCIC should be initialized at start of the timer.
* So, here we report the presence of PCIC and do some magic passes.
*/
- if(!pcic)
+ if(!pcic0_up)
return;
-
- printk("PCIC MAP: config addr=0x%lx; config data=0x%lx, "
- "regs=0x%lx io=0x%lx\n",
- pcic->pcic_config_space_addr, pcic->pcic_config_space_data,
- pcic->pcic_regs, pcic->pcic_io);
+ pcic = &pcic0;
/*
* Switch off IOTLB translation.
@@ -302,11 +447,18 @@
writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0);
writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY,
pcic->pcic_regs+PCI_BASE_ADDRESS_0);
+
+ pcic_pbm_scan_bus(pcic);
+
+ ebus_init();
+#ifdef CONFIG_SUN_JSFLASH
+ jsflash_init();
+#endif
}
-int pcibios_present(void)
+int pcic_present(void)
{
- return pcic != NULL;
+ return pcic0_up;
}
static int __init pdev_to_pnode(struct linux_pbm_info *pbm,
@@ -334,91 +486,77 @@
return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC);
}
-static void pcic_map_pci_device (struct pci_dev *dev, int node) {
- struct linux_prom_pci_assigned_addresses addrs[6];
- int addrlen;
- int i, j;
-
- /* Is any valid address present ? */
- i = 0;
- for(j = 0; j < 6; j++)
- if (dev->base_address[j]) i++;
- if (!i) return; /* nothing to do */
+static void pcic_map_pci_device(struct linux_pcic *pcic,
+ struct pci_dev *dev, int node)
+{
+ char namebuf[64];
+ unsigned long address;
+ unsigned long flags;
+ int j;
if (node == 0 || node == -1) {
- printk("PCIC: no prom node for device ID (%x,%x)\n",
- dev->device, dev->vendor);
- return;
- }
-
- /*
- * find related address and get it's window length
- */
- addrlen = prom_getproperty(node,"assigned-addresses",
- (char*)addrs, sizeof(addrs));
- if (addrlen == -1) {
- printk("PCIC: no \"assigned-addresses\" for device (%x,%x)\n",
- dev->device, dev->vendor);
- return;
+ strcpy(namebuf, "???");
+ } else {
+ prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
}
- addrlen /= sizeof(struct linux_prom_pci_assigned_addresses);
- for (i = 0; i < addrlen; i++ )
- for (j = 0; j < 6; j++) {
- if (!dev->base_address[j] || !addrs[i].phys_lo)
- continue;
- if (addrs[i].phys_lo == dev->base_address[j]) {
- unsigned long address = dev->base_address[j];
- int length = addrs[i].size_lo;
- char namebuf[128] = { 0, };
- unsigned long mapaddr, addrflags;
-
- prom_getstring(node, "name", namebuf, sizeof(namebuf));
-
- /*
- * failure in allocation too large space
- */
- if (length > 0x200000) {
- length = 0x200000;
- prom_printf("PCIC: map window for device '%s' "
- "reduced to 2MB !\n", namebuf);
- }
-
- /*
- * Be careful with MEM/IO address flags
- */
- if ((address & PCI_BASE_ADDRESS_SPACE) ==
- PCI_BASE_ADDRESS_SPACE_IO) {
- mapaddr = address & PCI_BASE_ADDRESS_IO_MASK;
+ for (j = 0; j < 6; j++) {
+ address = dev->resource[j].start;
+ if (address == 0) break; /* are sequential */
+ flags = dev->resource[j].flags;
+ if ((flags & IORESOURCE_IO) != 0) {
+ if (address < 0x10000) {
+ /*
+ * A device responds to I/O cycles on PCI.
+ * We generate these cycles with memory
+ * access into the fixed map (phys 0x30000000).
+ *
+ * Since a device driver does not want to
+ * do ioremap() before accessing PC-style I/O,
+ * we supply virtual, ready to access address.
+ *
+ * Ebus devices do not come here even if
+ * CheerIO makes a similar conversion.
+ * See ebus.c for details.
+ *
+ * Note that check_region()/request_region()
+ * work for these devices.
+ *
+ * XXX Neat trick, but it's a *bad* idea
+ * to shit into regions like that.
+ * What if we want to allocate one more
+ * PCI base address...
+ */
+ dev->resource[j].start =
+ pcic->pcic_io + address;
+ dev->resource[j].end = 1; /* XXX */
+ dev->resource[j].flags =
+ (flags & ~IORESOURCE_IO) | IORESOURCE_MEM;
} else {
- mapaddr = address & PCI_BASE_ADDRESS_MEM_MASK;
+ /*
+ * OOPS... PCI Spec allows this. Sun does
+ * not have any devices getting above 64K
+ * so it must be user with a weird I/O
+ * board in a PCI slot. We must remap it
+ * under 64K but it is not done yet. XXX
+ */
+ printk("PCIC: Skipping I/O space at 0x%lx,"
+ "this will Oops if a driver attaches;"
+ "device '%s' (%x,%x)\n", address, namebuf,
+ dev->device, dev->vendor);
}
- addrflags = address ^ mapaddr;
-
- dev->base_address[j] =
- (unsigned long)sparc_alloc_io(address, 0,
- length,
- namebuf, 0, 0);
- if ( dev->base_address[j] == 0 )
- panic("PCIC: failed make mapping for "
- "pci device '%s' with address %lx\n",
- namebuf, address);
-
- dev->base_address[j] ^= addrflags;
- return;
}
- }
-
- printk("PCIC: unable to match addresses for device (%x,%x)\n",
- dev->device, dev->vendor);
+ }
}
-static void pcic_fill_irq(struct pci_dev *dev, int node) {
+static void
+pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
+{
struct pcic_ca2irq *p;
int i, ivec;
char namebuf[64]; /* P3 remove */
- if (node == -1) {
+ if (node == 0 || node == -1) {
strcpy(namebuf, "???");
} else {
prom_getstring(node, "name", namebuf, sizeof(namebuf)); /* P3 remove */
@@ -474,53 +612,33 @@
}
/*
- * Assign IO space for a device.
- * This is a chance for devices which have the same IO and Mem Space to
- * fork access to IO and Mem.
- *
- * Now, we assume there is one such device only (IGA 1682) but code below
- * should work in cases when space of all such devices is less then 16MB.
- */
-unsigned long pcic_alloc_io( unsigned long* addr )
-{
- unsigned long paddr = *addr;
- unsigned long offset;
-
- if(pcic->pcic_mapped_io == 0) {
- pcic->pcic_mapped_io = paddr & ~(PCI_SPACE_SIZE-1) ;
- writeb((pcic->pcic_mapped_io>>24) & 0xff,
- pcic->pcic_regs+PCI_PIBAR);
- writeb((pcic->pcic_io_phys>>24) & PCI_SIBAR_ADDRESS_MASK,
- pcic->pcic_regs+PCI_SIBAR);
- writeb(PCI_ISIZE_16M, pcic->pcic_regs+PCI_ISIZE);
-
- }
- if(paddr < pcic->pcic_mapped_io ||
- paddr >= pcic->pcic_mapped_io + 0x10000)
- return 0;
- offset = paddr - pcic->pcic_mapped_io;
- *addr = pcic->pcic_io_phys + offset;
- return pcic->pcic_io + offset;
-}
-
-/*
- * Stolen from both i386 and sparc64 branch
+ * Normally called from {do_}pci_scan_bus...
*/
-void __init pcibios_fixup(void)
+void __init pcibios_fixup_bus(struct pci_bus *bus)
{
- struct pci_dev *dev;
- int i, has_io, has_mem;
- unsigned short cmd;
- struct linux_pbm_info* pbm = &pcic->pbm;
+ struct pci_dev *dev;
+ int i, has_io, has_mem;
+ unsigned short cmd;
+ struct linux_pcic *pcic;
+ /* struct linux_pbm_info* pbm = &pcic->pbm; */
int node;
struct pcidev_cookie *pcp;
- if(pcic == NULL) {
- prom_printf("PCI: Error, PCIC not found.\n");
- prom_halt();
+ if (!pcic0_up) {
+ printk("pcibios_fixup_bus: no PCIC\n");
+ return;
}
+ pcic = &pcic0;
- for (dev = pci_devices; dev; dev=dev->next) {
+ /*
+ * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus);
+ */
+ if (bus->number != 0) {
+ printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number);
+ return;
+ }
+
+ for (dev = bus->devices; dev; dev = dev->sibling) {
/*
* Comment from i386 branch:
* There are buggy BIOSes that forget to enable I/O and memory
@@ -531,44 +649,42 @@
*/
has_io = has_mem = 0;
for(i=0; i<6; i++) {
- unsigned long a = dev->base_address[i];
- if (a & PCI_BASE_ADDRESS_SPACE_IO) {
+ unsigned long f = dev->resource[i].flags;
+ if (f & IORESOURCE_IO) {
has_io = 1;
- } else if (a & PCI_BASE_ADDRESS_MEM_MASK)
+ } else if (f & IORESOURCE_MEM)
has_mem = 1;
}
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ pcic_read_config_word(dev, PCI_COMMAND, &cmd);
if (has_io && !(cmd & PCI_COMMAND_IO)) {
printk("PCIC: Enabling I/O for device %02x:%02x\n",
dev->bus->number, dev->devfn);
cmd |= PCI_COMMAND_IO;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pcic_write_config_word(dev, PCI_COMMAND, cmd);
}
if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
printk("PCIC: Enabling memory for device %02x:%02x\n",
dev->bus->number, dev->devfn);
cmd |= PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pcic_write_config_word(dev, PCI_COMMAND, cmd);
}
- node = pdev_to_pnode(pbm, dev);
+ node = pdev_to_pnode(&pcic->pbm, dev);
if(node == 0)
node = -1;
/* cookies */
pcp = pci_devcookie_alloc();
- pcp->pbm = pbm;
+ pcp->pbm = &pcic->pbm;
pcp->prom_node = node;
dev->sysdata = pcp;
- /* memory mapping */
+ /* fixing I/O to look like memory */
if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE)
- pcic_map_pci_device(dev, node);
+ pcic_map_pci_device(pcic, dev, node);
- pcic_fill_irq(dev, node);
+ pcic_fill_irq(pcic, dev, node);
}
-
- ebus_init();
}
/*
@@ -577,6 +693,7 @@
unsigned int
pcic_pin_to_irq(unsigned int pin, char *name)
{
+ struct linux_pcic *pcic = &pcic0;
unsigned int irq;
unsigned int ivec;
@@ -599,7 +716,7 @@
static void pcic_clear_clock_irq(void)
{
- pcic_timer_dummy = readl(pcic->pcic_regs+PCI_SYS_LIMIT);
+ pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT);
}
static void pcic_timer_handler (int irq, void *h, struct pt_regs *regs)
@@ -613,6 +730,7 @@
void __init pci_time_init(void)
{
+ struct linux_pcic *pcic = &pcic0;
unsigned long v;
int timer_irq, irq;
@@ -620,9 +738,9 @@
/* A hack until do_gettimeofday prototype is moved to arch specific headers
and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
((unsigned int *)do_gettimeofday)[0] =
- 0x10800000 | ((((unsigned long)pci_do_gettimeofday - (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
- ((unsigned int *)do_gettimeofday)[1] =
- 0x01000000;
+ 0x10800000 | ((((unsigned long)pci_do_gettimeofday -
+ (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
+ ((unsigned int *)do_gettimeofday)[1] = 0x01000000;
BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
btfixup();
@@ -650,7 +768,7 @@
* to have microsecond resolution and to avoid overflow
*/
unsigned long count =
- readl(pcic->pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+ readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
if(test_bit(TIMER_BH, &bh_active))
@@ -705,103 +823,9 @@
}
#endif
-#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
-
-int pcibios_read_config_byte(unsigned char bus, unsigned char device_fn,
- unsigned char where, unsigned char *value)
-{
- unsigned int v;
-
- pcibios_read_config_dword (bus, device_fn, where&~3, &v);
- *value = 0xff & (v >> (8*(where & 3)));
- return PCIBIOS_SUCCESSFUL;
-}
-
-int pcibios_read_config_word (unsigned char bus,
- unsigned char device_fn,
- unsigned char where, unsigned short *value)
-{
- unsigned int v;
- if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
-
- pcibios_read_config_dword (bus, device_fn, where&~3, &v);
- *value = 0xffff & (v >> (8*(where & 3)));
- return PCIBIOS_SUCCESSFUL;
-}
-
-int pcibios_read_config_dword (unsigned char bus, unsigned char device_fn,
- unsigned char where, unsigned int *value)
-{
- unsigned long flags;
-
- if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
-
- save_and_cli(flags);
-#if 0
- pcic_speculative = 1;
- pcic_trapped = 0;
-#endif
- writel(CONFIG_CMD(bus,device_fn,where), pcic->pcic_config_space_addr);
-#if 0
- nop();
- if (pcic_trapped) {
- restore_flags(flags);
- *value = ~0;
- return PCIBIOS_SUCCESSFUL;
- }
-#endif
- pcic_speculative = 2;
- pcic_trapped = 0;
- *value = readl(pcic->pcic_config_space_data + (where&4));
- nop();
- if (pcic_trapped) {
- pcic_speculative = 0;
- restore_flags(flags);
- *value = ~0;
- return PCIBIOS_SUCCESSFUL;
- }
- pcic_speculative = 0;
- restore_flags(flags);
- return PCIBIOS_SUCCESSFUL;
-}
-
-int pcibios_write_config_byte (unsigned char bus, unsigned char devfn,
- unsigned char where, unsigned char value)
-{
- unsigned int v;
-
- pcibios_read_config_dword (bus, devfn, where&~3, &v);
- v = (v & ~(0xff << (8*(where&3)))) |
- ((0xff&(unsigned)value) << (8*(where&3)));
- return pcibios_write_config_dword (bus, devfn, where&~3, v);
-}
-
-int pcibios_write_config_word (unsigned char bus, unsigned char devfn,
- unsigned char where, unsigned short value)
-{
- unsigned int v;
- if (where&1) return PCIBIOS_BAD_REGISTER_NUMBER;
-
- pcibios_read_config_dword (bus, devfn, where&~3, &v);
- v = (v & ~(0xffff << (8*(where&3)))) |
- ((0xffff&(unsigned)value) << (8*(where&3)));
- return pcibios_write_config_dword (bus, devfn, where&~3, v);
-}
-
-int pcibios_write_config_dword (unsigned char bus, unsigned char devfn,
- unsigned char where, unsigned int value)
-{
- unsigned long flags;
-
- if (where&3) return PCIBIOS_BAD_REGISTER_NUMBER;
-
- save_and_cli(flags);
- writel(CONFIG_CMD(bus,devfn,where),pcic->pcic_config_space_addr);
- writel(value, pcic->pcic_config_space_data + (where&4));
- restore_flags(flags);
- return PCIBIOS_SUCCESSFUL;
-}
-
+/*
+ * Other archs parse arguments here.
+ */
char * __init pcibios_setup(char *str)
{
return str;
@@ -831,6 +855,9 @@
}
/*
+ * XXX Gleb wrote me that he needs this for X server (only).
+ * Since we successfuly use XF86_FBDev, we do not need these anymore.
+ *
* Following code added to handle extra PCI-related system calls
*/
asmlinkage int sys_pciconfig_read(unsigned long bus,
@@ -870,7 +897,7 @@
return err;
}
-
+
asmlinkage int sys_pciconfig_write(unsigned long bus,
unsigned long dfn,
unsigned long off,
@@ -936,7 +963,7 @@
mask = get_irqmask(irq_nr);
save_and_cli(flags);
- writel(mask, pcic->pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
+ writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
restore_flags(flags);
}
@@ -946,7 +973,7 @@
mask = get_irqmask(irq_nr);
save_and_cli(flags);
- writel(mask, pcic->pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
+ writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
restore_flags(flags);
}
@@ -965,12 +992,12 @@
*/
static void pcic_disable_pil_irq(unsigned int pil)
{
- writel(get_irqmask(pil), pcic->pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
+ writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
}
static void pcic_enable_pil_irq(unsigned int pil)
{
- writel(get_irqmask(pil), pcic->pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
+ writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
}
void __init sun4m_pci_init_IRQ(void)
@@ -985,8 +1012,9 @@
BTFIXUPSET_CALL(__irq_itoa, pcic_irq_itoa, BTFIXUPCALL_NORM);
}
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+int pcibios_assign_resource(struct pci_dev *pdev, int resource)
{
+ return -ENXIO;
}
#endif
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])