patch-2.3.35 linux/drivers/sbus/char/sab82532.c
Next file: linux/drivers/sbus/char/su.c
Previous file: linux/drivers/sbus/char/pcikbd.c
Back to the patch index
Back to the overall index
- Lines: 131
- Date:
Mon Dec 20 22:06:42 1999
- Orig file:
v2.3.34/linux/drivers/sbus/char/sab82532.c
- Orig date:
Fri Sep 10 23:57:30 1999
diff -u --recursive --new-file v2.3.34/linux/drivers/sbus/char/sab82532.c linux/drivers/sbus/char/sab82532.c
@@ -1,4 +1,4 @@
-/* $Id: sab82532.c,v 1.35 1999/09/01 08:09:29 davem Exp $
+/* $Id: sab82532.c,v 1.40 1999/12/19 23:28:08 davem Exp $
* sab82532.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
*
* Copyright (C) 1997 Eddie C. Dost ([email protected])
@@ -15,6 +15,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <linux/console.h>
#include <linux/major.h>
@@ -36,6 +37,12 @@
static DECLARE_TASK_QUEUE(tq_serial);
+/* This is (one of many) a special gross hack to allow SU and
+ * SAB serials to co-exist on the same machine. -DaveM
+ */
+#undef SERIAL_BH
+#define SERIAL_BH AURORA_BH
+
static struct tty_driver serial_driver, callout_driver;
static int sab82532_refcount;
@@ -252,6 +259,9 @@
{
unsigned char saved_rfc, tmp;
+ if (!stop_a_enabled)
+ return;
+
/* If we are doing kadb, we call the debugger
* else we just drop into the boot monitor.
* Note that we must flush the user windows
@@ -2129,7 +2139,7 @@
}
memset(sab, 0, sizeof(struct sab82532));
- sab->regs = (union sab82532_async_regs *)(regs + offset);
+ sab->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs));
sab->irq = edev->irqs[0];
sab->line = 1 - i;
sab->xmit_fifo_size = 32;
@@ -2153,7 +2163,7 @@
static inline void __init show_serial_version(void)
{
- char *revision = "$Revision: 1.35 $";
+ char *revision = "$Revision: 1.40 $";
char *version, *p;
version = strchr(revision, ' ');
@@ -2163,6 +2173,8 @@
printk("SAB82532 serial driver version %s\n", serial_version);
}
+extern int su_num_ports;
+
/*
* The serial driver boot-time initialization code!
*/
@@ -2186,7 +2198,7 @@
serial_driver.driver_name = "serial";
serial_driver.name = "ttyS";
serial_driver.major = TTY_MAJOR;
- serial_driver.minor_start = 64;
+ serial_driver.minor_start = 64 + su_num_ports;
serial_driver.num = NR_PORTS;
serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
serial_driver.subtype = SERIAL_TYPE_NORMAL;
@@ -2284,7 +2296,7 @@
printk(KERN_INFO
"ttyS%02d at 0x%lx (irq = %s) is a SAB82532 %s\n",
- info->line, (unsigned long)info->regs,
+ info->line + su_num_ports, (unsigned long)info->regs,
__irq_itoa(info->irq), sab82532_version[info->type]);
}
@@ -2294,7 +2306,7 @@
return 0;
}
-int __init sab82532_probe(unsigned long *memory_start)
+int __init sab82532_probe(void)
{
int node, enode, snode;
char model[32];
@@ -2338,9 +2350,9 @@
found:
#ifdef CONFIG_SERIAL_CONSOLE
- sunserial_setinitfunc(memory_start, sab82532_console_init);
+ sunserial_setinitfunc(sab82532_console_init);
#endif
- sunserial_setinitfunc(memory_start, sab82532_init);
+ sunserial_setinitfunc(sab82532_init);
rs_ops.rs_kgdb_hook = sab82532_kgdb_hook;
return 0;
}
@@ -2356,6 +2368,7 @@
void cleanup_module(void)
{
+ struct sab82532 *sab;
unsigned long flags;
int e1, e2;
@@ -2378,6 +2391,8 @@
free_page((unsigned long) tmp_buf);
tmp_buf = NULL;
}
+ for (sab = sab82532_chain; sab; sab = sab->next)
+ iounmap(sab->regs);
}
#endif /* MODULE */
@@ -2575,8 +2590,9 @@
int __init sab82532_console_init(void)
{
extern int con_is_present(void);
+ extern int su_console_registered;
- if (con_is_present())
+ if (con_is_present() || su_console_registered)
return 0;
if (!sab82532_chain) {
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])