patch-2.3.45 linux/arch/m68k/mac/macints.c
Next file: linux/arch/m68k/mac/mackeyb.c
Previous file: linux/arch/m68k/mac/iop.c
Back to the patch index
Back to the overall index
- Lines: 479
- Date:
Sun Feb 13 11:21:42 2000
- Orig file:
v2.3.44/linux/arch/m68k/mac/macints.c
- Orig date:
Thu Nov 18 20:25:37 1999
diff -u --recursive --new-file v2.3.44/linux/arch/m68k/mac/macints.c linux/arch/m68k/mac/macints.c
@@ -35,8 +35,8 @@
* 3 - unused (?)
*
* 4 - SCC (slot number determined by reading RR3 on the SSC itself)
- * - slot 0: SCC channel A
- * - slot 1: SCC channel B
+ * - slot 1: SCC channel A
+ * - slot 2: SCC channel B
*
* 5 - unused (?)
* [serial errors or special conditions seem to raise level 6
@@ -55,8 +55,8 @@
* - slot 5: Slot $E
*
* 4 - SCC IOP
- * - slot 0: SCC channel A
- * - slot 1: SCC channel B
+ * - slot 1: SCC channel A
+ * - slot 2: SCC channel B
*
* 5 - ISM IOP (ADB?)
*
@@ -100,19 +100,18 @@
* bits. The handlers for this new machspec interrupt number are then
* called. This puts Nubus interrupts into the range 56-62.
*
+ * - The Baboon interrupts (used on some PowerBooks) are an even more special
+ * case. They're hidden behind the Nubus slot $C interrupt thus adding a
+ * third layer of indirection. Why oh why did the Apple engineers do that?
+ *
* - We support "fast" and "slow" handlers, just like the Amiga port. The
* fast handlers are called first and with all interrupts disabled. They
* are expected to execute quickly (hence the name). The slow handlers are
* called last with interrupts enabled and the interrupt level restored.
* They must therefore be reentrant.
*
- * - Drivers should never try to request autovector interrupt numbers. It
- * won't work.
- *
* TODO:
*
- * o Perhaps build some intelligence into mac_SCC_handler(); we could check
- * the SCC ourselves and only call the handler for the appopriate channel.
*/
#include <linux/types.h>
@@ -125,6 +124,7 @@
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/traps.h>
+#include <asm/bootinfo.h>
#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/mac_via.h>
@@ -133,6 +133,18 @@
#include <asm/macints.h>
/*
+ * The mac_irq_list array is an array of linked lists of irq_node_t nodes.
+ * Each node contains one handler to be called whenever the interrupt
+ * occurs, with fast handlers listed before slow handlers.
+ */
+
+irq_node_t *mac_irq_list[NUM_MAC_SOURCES];
+
+/* SCC interrupt mask */
+
+static int scc_mask;
+
+/*
* VIA/RBV hooks
*/
@@ -176,6 +188,26 @@
extern void iop_register_interrupts(void);
/*
+ * Baboon hooks
+ */
+
+extern int baboon_present;
+
+extern void baboon_init(void);
+extern void baboon_register_interrupts(void);
+extern void baboon_irq_enable(int);
+extern void baboon_irq_disable(int);
+extern void baboon_irq_clear(int);
+extern int baboon_irq_pending(int);
+
+/*
+ * SCC interrupt routines
+ */
+
+static void scc_irq_enable(int);
+static void scc_irq_disable(int);
+
+/*
* console_loglevel determines NMI handler function
*/
@@ -184,17 +216,27 @@
extern void mac_bang(int, void *, struct pt_regs *);
void mac_nmi_handler(int, void *, struct pt_regs *);
-void mac_SCC_handler(int, void *, struct pt_regs *);
+void mac_debug_handler(int, void *, struct pt_regs *);
/* #define DEBUG_MACINTS */
void mac_init_IRQ(void)
{
+ int i;
+
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Setting things up...\n");
#endif
+ /* Initialize the IRQ handler lists. Initially each list is empty, */
+
+ for (i = 0; i < NUM_MAC_SOURCES; i++) {
+ mac_irq_list[i] = NULL;
+ }
+
+ scc_mask = 0;
+
/*
- * Register the handlers for the the master IRQ handlers
+ * Now register the handlers for the the master IRQ handlers
* at levels 1-7. Most of the work is done elsewhere.
*/
@@ -204,8 +246,9 @@
via_register_interrupts();
}
if (psc_present) psc_register_interrupts();
+ if (baboon_present) baboon_register_interrupts();
iop_register_interrupts();
- request_irq(7, mac_nmi_handler, IRQ_FLG_LOCK, "NMI", mac_nmi_handler);
+ sys_request_irq(7, mac_nmi_handler, IRQ_FLG_LOCK, "NMI", mac_nmi_handler);
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Done!\n");
#endif
@@ -284,27 +327,20 @@
void mac_do_irq_list(int irq, struct pt_regs *fp)
{
- irq_node_t *node, *slow_nodes, **list = NULL;
+ irq_node_t *node, *slow_nodes;
unsigned long cpu_flags;
kstat.irqs[0][irq]++;
- if (irq < VIA1_SOURCE_BASE) {
- list = &autoirq_list[irq];
- } else if (irq < NUM_MAC_SOURCES) {
- list = &userirq_list[irq - VIA1_SOURCE_BASE];
- }
- if (!list) return;
-
#ifdef DEBUG_SPURIOUS
- if (!*list && (console_loglevel > 7)) {
+ if (!mac_irq_list[irq] && (console_loglevel > 7)) {
printk("mac_do_irq_list: spurious interrupt %d!\n", irq);
return;
}
#endif
/* serve first fast and normal handlers */
- for (node = *list;
+ for (node = mac_irq_list[irq];
node && (!(node->flags & IRQ_FLG_SLOW));
node = node->next)
node->handler(irq, node->dev_id, fp);
@@ -329,7 +365,9 @@
void mac_enable_irq (unsigned int irq)
{
- switch(IRQ_SRC(irq)) {
+ int irq_src = IRQ_SRC(irq);
+
+ switch(irq_src) {
case 1: via_irq_enable(irq);
break;
case 2:
@@ -346,6 +384,12 @@
psc_irq_enable(irq);
} else if (oss_present) {
oss_irq_enable(irq);
+ } else if (irq_src == 4) {
+ scc_irq_enable(irq);
+ }
+ break;
+ case 8: if (baboon_present) {
+ baboon_irq_enable(irq);
}
break;
}
@@ -353,12 +397,13 @@
void mac_disable_irq (unsigned int irq)
{
- switch(IRQ_SRC(irq)) {
+ int irq_src = IRQ_SRC(irq);
+
+ switch(irq_src) {
case 1: via_irq_disable(irq);
break;
case 2:
- case 7:
- if (oss_present) {
+ case 7: if (oss_present) {
oss_irq_disable(irq);
} else {
via_irq_disable(irq);
@@ -371,6 +416,12 @@
psc_irq_disable(irq);
} else if (oss_present) {
oss_irq_disable(irq);
+ } else if (irq_src == 4) {
+ scc_irq_disable(irq);
+ }
+ break;
+ case 8: if (baboon_present) {
+ baboon_irq_disable(irq);
}
break;
}
@@ -397,6 +448,10 @@
oss_irq_clear(irq);
}
break;
+ case 8: if (baboon_present) {
+ baboon_irq_clear(irq);
+ }
+ break;
}
}
@@ -434,29 +489,37 @@
void (*handler)(int, void *, struct pt_regs *),
unsigned long flags, const char *devname, void *dev_id)
{
- int vec, ret;
+ irq_node_t *node;
#ifdef DEBUG_MACINTS
printk ("%s: irq %d requested for %s\n", __FUNCTION__, irq, devname);
#endif
if (irq < VIA1_SOURCE_BASE) {
- vec = VEC_SPUR + irq;
- } else if (irq < NUM_MAC_SOURCES) {
- vec = VEC_USER + irq - VIA1_SOURCE_BASE;
- } else {
+ return sys_request_irq(irq, handler, flags, devname, dev_id);
+ }
+
+ if (irq >= NUM_MAC_SOURCES) {
printk ("%s: unknown irq %d requested by %s\n",
__FUNCTION__, irq, devname);
- return -EAGAIN;
}
- ret = sys_request_listirq(vec, handler, flags, devname, dev_id);
- if (!ret) {
- vectors[vec] = autoirq_listhandler;
- mac_enable_irq(irq);
- }
+ /* Get a node and stick it onto the right list */
+
+ if (!(node = new_irq_node())) return -ENOMEM;
- return ret;
+ node->handler = handler;
+ node->flags = flags;
+ node->dev_id = dev_id;
+ node->devname = devname;
+ node->next = NULL;
+ mac_insert_irq(&mac_irq_list[irq], node);
+
+ /* Now enable the IRQ source */
+
+ mac_enable_irq(irq);
+
+ return 0;
}
/*
@@ -465,30 +528,120 @@
void mac_free_irq(unsigned int irq, void *dev_id)
{
- irq_node_t **list = NULL;
- int vec = 0;
-
#ifdef DEBUG_MACINTS
printk ("%s: irq %d freed by %p\n", __FUNCTION__, irq, dev_id);
#endif
if (irq < VIA1_SOURCE_BASE) {
- vec = VEC_SPUR + irq;
- list = &autoirq_list[irq];
- } else if (irq < NUM_MAC_SOURCES) {
- vec = VEC_USER + irq - VIA1_SOURCE_BASE;
- list = &userirq_list[irq - VIA1_SOURCE_BASE];
+ return sys_free_irq(irq, dev_id);
+ }
+
+ if (irq >= NUM_MAC_SOURCES) {
+ printk ("%s: unknown irq %d freed\n",
+ __FUNCTION__, irq);
+ return;
}
- if (!list) return;
- sys_free_irq(vec, dev_id);
+ mac_delete_irq(&mac_irq_list[irq], dev_id);
/* If the list for this interrupt is */
/* empty then disable the source. */
- if (!*list) {
+ if (!mac_irq_list[irq]) {
mac_disable_irq(irq);
- vectors[vec] = bad_interrupt;
+ }
+}
+
+/*
+ * Generate a pretty listing for /proc/interrupts
+ *
+ * By the time we're called the autovector interrupt list has already been
+ * generated, so we just need to do the machspec interrupts.
+ *
+ * 990506 (jmt) - rewritten to handle chained machspec interrupt handlers.
+ * Also removed display of num_spurious it is already
+ * displayed for us as autovector irq 0.
+ */
+
+int mac_get_irq_list (char *buf)
+{
+ int i, len = 0;
+ irq_node_t *node;
+ char *base;
+
+ /* Don't do Nubus interrupts in this loop; we do them separately */
+ /* below so that we can print slot numbers instead of IRQ numbers */
+
+ for (i = VIA1_SOURCE_BASE ; i < NUM_MAC_SOURCES ; ++i) {
+
+ /* Nonexistant interrupt or nothing registered; skip it. */
+
+ if ((node = mac_irq_list[i]) == NULL) continue;
+ if (node->flags & IRQ_FLG_STD) continue;
+
+ base = "";
+ switch(IRQ_SRC(i)) {
+ case 1: base = "via1";
+ break;
+ case 2: if (oss_present) {
+ base = "oss";
+ } else {
+ base = "via2";
+ }
+ break;
+ case 3:
+ case 4:
+ case 5:
+ case 6: if (psc_present) {
+ base = "psc";
+ } else if (oss_present) {
+ base = "oss";
+ } else {
+ if (IRQ_SRC(i) == 4) base = "scc";
+ }
+ break;
+ case 7: base = "nbus";
+ break;
+ case 8: base = "bbn";
+ break;
+ }
+ len += sprintf(buf+len, "%4s %2d: %10u ",
+ base, i, kstat.irqs[0][i]);
+
+ do {
+ if (node->flags & IRQ_FLG_FAST) {
+ len += sprintf(buf+len, "F ");
+ } else if (node->flags & IRQ_FLG_SLOW) {
+ len += sprintf(buf+len, "S ");
+ } else {
+ len += sprintf(buf+len, " ");
+ }
+ len += sprintf(buf+len, "%s\n", node->devname);
+ if ((node = node->next)) {
+ len += sprintf(buf+len, " ");
+ }
+ } while(node);
+
+ }
+ return len;
+}
+
+void mac_default_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef DEBUG_SPURIOUS
+ if (console_loglevel > 6) {
+ printk("Unexpected IRQ %d on device %p\n", irq, dev_id);
+ }
+#endif
+}
+
+static int num_debug[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+void mac_debug_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (num_debug[irq] < 10) {
+ printk("DEBUG: Unexpected IRQ %d\n", irq);
+ num_debug[irq]++;
}
}
@@ -543,12 +696,53 @@
}
/*
- * SCC master interrupt handler; sole purpose: pass the registered
- * async struct to the SCC handler proper.
+ * Simple routines for masking and unmasking
+ * SCC interrupts in cases where this can't be
+ * done in hardware (only the PSC can do that.)
+ */
+
+static void scc_irq_enable(int irq) {
+ int irq_idx = IRQ_IDX(irq);
+
+ scc_mask |= (1 << irq_idx);
+}
+
+static void scc_irq_disable(int irq) {
+ int irq_idx = IRQ_IDX(irq);
+
+ scc_mask &= ~(1 << irq_idx);
+}
+
+/*
+ * SCC master interrupt handler. We have to do a bit of magic here
+ * to figure out what channel gave us the interrupt; putting this
+ * here is cleaner than hacking it into drivers/char/macserial.c.
*/
-void mac_SCC_handler(int irq, void *dev_id, struct pt_regs *regs)
+void mac_scc_dispatch(int irq, void *dev_id, struct pt_regs *regs)
{
- mac_do_irq_list(IRQ_SCCA, regs);
- mac_do_irq_list(IRQ_SCCB, regs);
+ volatile unsigned char *scc = (unsigned char *) mac_bi_data.sccbase + 2;
+ unsigned char reg;
+ unsigned long cpu_flags;
+
+ /* Read RR3 from the chip. Always do this on channel A */
+ /* This must be an atomic operation so disable irqs. */
+
+ save_flags(cpu_flags); cli();
+ *scc = 3;
+ reg = *scc;
+ restore_flags(cpu_flags);
+
+ /* Now dispatch. Bits 0-2 are for channel B and */
+ /* bits 3-5 are for channel A. We can safely */
+ /* ignore the remaining bits here. */
+ /* */
+ /* Note that we're ignoring scc_mask for now. */
+ /* If we actually mask the ints then we tend to */
+ /* get hammered by very persistant SCC irqs, */
+ /* and since they're autovector interrupts they */
+ /* pretty much kill the system. */
+
+ if (reg & 0x38) mac_do_irq_list(IRQ_SCCA, regs);
+ if (reg & 0x07) mac_do_irq_list(IRQ_SCCB, regs);
}
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])