patch-2.3.46 linux/drivers/isdn/Config.in

Next file: linux/drivers/isdn/Makefile
Previous file: linux/drivers/i2o/i2o_block.c
Back to the patch index
Back to the overall index
Lines: 148
Date: Tue Feb 15 11:40:42 2000
Orig file: v2.3.45/linux/drivers/isdn/Config.in
Orig date: Tue Nov 23 22:42:20 1999

diff -u --recursive --new-file v2.3.45/linux/drivers/isdn/Config.in linux/drivers/isdn/Config.in
@@ -12,68 +12,99 @@
 if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
    bool '    Support AT-Fax Class 2 commands' CONFIG_ISDN_TTY_FAX
 fi
-bool '  Support isdn diversion services' CONFIG_ISDN_DIVERSION
 if [ "$CONFIG_X25" != "n" ]; then
    bool '  X.25 PLP on top of ISDN' CONFIG_ISDN_X25
 fi
-dep_tristate '  ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
-dep_tristate '  isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
-dep_tristate '  PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
-dep_tristate '  HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
+
+mainmenu_option next_comment
+comment 'ISDN feature submodules'
+   dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
+   bool 'Support isdn diversion services' CONFIG_ISDN_DIVERSION
+endmenu
+
+comment 'low-level hardware drivers'
+
+mainmenu_option next_comment
+comment 'Passive ISDN cards'
+dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
 if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
-   bool '    HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
+   comment '  D-channel protocol features'
+   bool '  HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
    if [ "$CONFIG_HISAX_EURO" != "n" ]; then
-      bool '      Support for german chargeinfo' CONFIG_DE_AOC
-      bool '      Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
-      bool '      Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
+      bool '    Support for german chargeinfo' CONFIG_DE_AOC
+      bool '    Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
+      bool '    Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
+      bool '    Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD
    fi
-   bool '    HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
-   bool '    HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
-   bool '    HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
-   bool '    HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI 
-   bool '    HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX 
-   bool '    HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
-   bool '    HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
-   bool '    HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
-   bool '    HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
-   bool '    HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
-   bool '    HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
-   bool '    HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
-   bool '    HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
-   bool '    HiSax Support for HFC-S based cards' CONFIG_HISAX_HFCS
-   bool '    HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
-   bool '    HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
-   bool '    HiSax Support for MIC card' CONFIG_HISAX_MIC
-   bool '    HiSax Support for NETjet card' CONFIG_HISAX_NETJET
-   bool '    HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
-   bool '    HiSax Support for Siemens I-Surf card' CONFIG_HISAX_ISURF
-   bool '    HiSax Support for HST Saphir card' CONFIG_HISAX_HSTSAPHIR
-   bool '    HiSax Support for Telekom A4T card' CONFIG_HISAX_BKM_A4T
-   bool '    HiSax Support for Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
-   bool '    HiSax Support for Gazel cards' CONFIG_HISAX_GAZEL
-   bool '    HiSax Support for HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
-   bool '    HiSax Support for Winbond W6692 based cards' CONFIG_HISAX_W6692
+   bool '  HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
+   comment '  HiSax supported cards'
+   bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0
+   bool '  Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
+   bool '  Teles PCI' CONFIG_HISAX_TELESPCI 
+   bool '  Teles S0Box' CONFIG_HISAX_S0BOX 
+   bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
+   bool '  AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
+   bool '  AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
+   bool '  Elsa cards' CONFIG_HISAX_ELSA
+   bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
+   bool '  Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
+   bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
+   bool '  TELEINT cards' CONFIG_HISAX_TELEINT
+   bool '  HFC-S based cards' CONFIG_HISAX_HFCS
+   bool '  Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
+   bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
+   bool '  MIC card' CONFIG_HISAX_MIC
+   bool '  NETjet card' CONFIG_HISAX_NETJET
+   bool '  Niccy PnP/PCI card' CONFIG_HISAX_NICCY
+   bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF
+   bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR
+   bool '  Telekom A4T card' CONFIG_HISAX_BKM_A4T
+   bool '  Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
+   bool '  Gazel cards' CONFIG_HISAX_GAZEL
+   bool '  HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
+   bool '  Winbond W6692 based cards' CONFIG_HISAX_W6692
    if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-#      bool '    HiSax Support for TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
+      bool '  HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
+#      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
       if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
-	 bool '    HiSax Support for Am7930' CONFIG_HISAX_AMD7930
+	 bool '  Am7930' CONFIG_HISAX_AMD7930
       fi
    fi
 fi
+endmenu
+
+mainmenu_option next_comment
+comment 'Active ISDN cards'
+dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
+dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
 if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-   dep_tristate '  Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
-   dep_tristate '  IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
+   dep_tristate 'Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
+   dep_tristate 'IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
 fi
-dep_tristate '  Eicon.Diehl active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
+dep_tristate 'Eicon active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
 if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
-   bool '    Eicon S, SX, SCOM, Quadro, S2M support' CONFIG_ISDN_DRV_EICON_ISA
+   bool '  Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
 fi
-dep_tristate '  AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
+dep_tristate 'AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
 if [ "$CONFIG_ISDN_DRV_AVMB1" != "n" ]; then
-   bool '    AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
-   bool '    AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
-   bool '    AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
-   bool '    AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
-   bool '    AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI
-   bool '    Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+   bool '  AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
+   bool '  AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
+   if [ "$CONFIG_ISDN_DRV_AVMB1_B1PCI" != "n" ]; then
+      if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
+         bool '  AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4
+      fi
+   fi
+   bool '  AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
+   bool '  AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
+   bool '  AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI
+   if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
+      bool '  AVM C4 support' CONFIG_ISDN_DRV_AVMB1_C4
+   fi
+   bool '  Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+fi
+if [ "$CONFIG_PROC_FS" != "n" ]; then
+if [ "$CONFIG_MODULES" != "n" ]; then
+   bool 'Hypercope HYSDN cards (Champ, Ergo, Metro) support (module)' CONFIG_HYSDN
+fi
 fi
+endmenu
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])