patch-2.3.46 linux/drivers/isdn/hisax/avm_pci.c
Next file: linux/drivers/isdn/hisax/bkm_a4t.c
Previous file: linux/drivers/isdn/hisax/asuscom.c
Back to the patch index
Back to the overall index
- Lines: 94
- Date:
Tue Feb 15 11:40:42 2000
- Orig file:
v2.3.45/linux/drivers/isdn/hisax/avm_pci.c
- Orig date:
Thu Nov 11 20:11:37 1999
diff -u --recursive --new-file v2.3.45/linux/drivers/isdn/hisax/avm_pci.c linux/drivers/isdn/hisax/avm_pci.c
@@ -1,4 +1,4 @@
-/* $Id: avm_pci.c,v 1.12 1999/09/04 06:20:05 keil Exp $
+/* $Id: avm_pci.c,v 1.14 1999/12/19 13:09:41 keil Exp $
* avm_pci.c low level stuff for AVM Fritz!PCI and ISA PnP isdn cards
* Thanks to AVM, Berlin for informations
@@ -7,6 +7,13 @@
*
*
* $Log: avm_pci.c,v $
+ * Revision 1.14 1999/12/19 13:09:41 keil
+ * changed TASK_INTERRUPTIBLE into TASK_UNINTERRUPTIBLE for
+ * signal proof delays
+ *
+ * Revision 1.13 1999/12/03 12:10:14 keil
+ * Bugfix: Wrong channel use on hangup of channel 2
+ *
* Revision 1.12 1999/09/04 06:20:05 keil
* Changes from kernel set_current_state()
*
@@ -56,7 +63,7 @@
#include <linux/interrupt.h>
extern const char *CardType[];
-static const char *avm_pci_rev = "$Revision: 1.12 $";
+static const char *avm_pci_rev = "$Revision: 1.14 $";
#define AVM_FRITZ_PCI 1
#define AVM_FRITZ_PNP 2
@@ -269,18 +276,26 @@
int hdlc = bcs->channel;
if (cs->debug & L1_DEB_HSCX)
- debugl1(cs, "hdlc %c mode %d ichan %d",
- 'A' + hdlc, mode, bc);
- bcs->mode = mode;
- bcs->channel = bc;
+ debugl1(cs, "hdlc %c mode %d --> %d ichan %d --> %d",
+ 'A' + hdlc, bcs->mode, mode, hdlc, bc);
bcs->hw.hdlc.ctrl.ctrl = 0;
switch (mode) {
+ case (-1): /* used for init */
+ bcs->mode = 1;
+ bcs->channel = bc;
+ bc = 0;
case (L1_MODE_NULL):
+ if (bcs->mode == L1_MODE_NULL)
+ return;
bcs->hw.hdlc.ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
bcs->hw.hdlc.ctrl.sr.mode = HDLC_MODE_TRANS;
write_ctrl(bcs, 5);
+ bcs->mode = L1_MODE_NULL;
+ bcs->channel = bc;
break;
case (L1_MODE_TRANS):
+ bcs->mode = mode;
+ bcs->channel = bc;
bcs->hw.hdlc.ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
bcs->hw.hdlc.ctrl.sr.mode = HDLC_MODE_TRANS;
write_ctrl(bcs, 5);
@@ -290,6 +305,8 @@
hdlc_sched_event(bcs, B_XMTBUFREADY);
break;
case (L1_MODE_HDLC):
+ bcs->mode = mode;
+ bcs->channel = bc;
bcs->hw.hdlc.ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
bcs->hw.hdlc.ctrl.sr.mode = HDLC_MODE_ITF_FLG;
write_ctrl(bcs, 5);
@@ -695,8 +712,8 @@
cs->bcs[1].BC_SetStack = setstack_hdlc;
cs->bcs[0].BC_Close = close_hdlcstate;
cs->bcs[1].BC_Close = close_hdlcstate;
- modehdlc(cs->bcs, 0, 0);
- modehdlc(cs->bcs + 1, 0, 0);
+ modehdlc(cs->bcs, -1, 0);
+ modehdlc(cs->bcs + 1, -1, 1);
}
static void
@@ -734,11 +751,11 @@
save_flags(flags);
sti();
outb(AVM_STATUS0_RESET | AVM_STATUS0_DIS_TIMER, cs->hw.avm.cfg_reg + 2);
- set_current_state(TASK_INTERRUPTIBLE);
+ set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((10*HZ)/1000); /* Timeout 10ms */
outb(AVM_STATUS0_DIS_TIMER | AVM_STATUS0_RES_TIMER | AVM_STATUS0_ENA_IRQ, cs->hw.avm.cfg_reg + 2);
outb(AVM_STATUS1_ENA_IOM | cs->irq, cs->hw.avm.cfg_reg + 3);
- set_current_state(TASK_INTERRUPTIBLE);
+ set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((10*HZ)/1000); /* Timeout 10ms */
printk(KERN_INFO "AVM PCI/PnP: S1 %x\n", inb(cs->hw.avm.cfg_reg + 3));
}
FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])