patch-2.3.46 linux/drivers/isdn/hysdn/hysdn_procconf.c

Next file: linux/drivers/isdn/hysdn/hysdn_procfs.c
Previous file: linux/drivers/isdn/hysdn/hysdn_pof.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.45/linux/drivers/isdn/hysdn/hysdn_procconf.c linux/drivers/isdn/hysdn/hysdn_procconf.c
@@ -0,0 +1,485 @@
+/* $Id: hysdn_procconf.c,v 1.2 2000/02/14 19:23:03 werner Exp $
+
+ * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
+ * written by Werner Cornelius ([email protected]) for Hypercope GmbH
+ *
+ * Copyright 1999  by Werner Cornelius ([email protected])
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * $Log: hysdn_procconf.c,v $
+ * Revision 1.2  2000/02/14 19:23:03  werner
+ *
+ * Changed handling of proc filesystem tables to a more portable version
+ *
+ * Revision 1.1  2000/02/10 19:45:18  werner
+ *
+ * Initial release
+ *
+ *
+ */
+
+#define __NO_VERSION__
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+
+#include "hysdn_defs.h"
+
+static char *hysdn_procconf_revision = "$Revision: 1.2 $";
+
+#define INFO_OUT_LEN 80		/* length of info line including lf */
+
+/********************************************************/
+/* defines and data structure for conf write operations */
+/********************************************************/
+#define CONF_STATE_DETECT 0	/* waiting for detect */
+#define CONF_STATE_CONF   1	/* writing config data */
+#define CONF_STATE_POF    2	/* writing pof data */
+#define CONF_LINE_LEN    80	/* 80 chars max */
+
+struct conf_writedata {
+	hysdn_card *card;	/* card the device is connected to */
+	int buf_size;		/* actual number of bytes in the buffer */
+	int needed_size;	/* needed size when reading pof */
+	int state;		/* actual interface states from above constants */
+	uchar conf_line[CONF_LINE_LEN];		/* buffered conf line */
+	word channel;		/* active channel number */
+	uchar *pof_buffer;	/* buffer when writing pof */
+};
+
+/***********************************************************************/
+/* process_line parses one config line and transfers it to the card if */
+/* necessary.                                                          */
+/* if the return value is negative an error occured.                   */
+/***********************************************************************/
+static int
+process_line(struct conf_writedata *cnf)
+{
+	uchar *cp = cnf->conf_line;
+	int i;
+
+	if (cnf->card->debug_flags & LOG_CNF_LINE)
+		hysdn_addlog(cnf->card, "conf line: %s", cp);
+
+	if (*cp == '-') {	/* option */
+		cp++;		/* point to option char */
+
+		if (*cp++ != 'c')
+			return (0);	/* option unknown or used */
+		i = 0;		/* start value for channel */
+		while ((*cp <= '9') && (*cp >= '0'))
+			i = i * 10 + *cp++ - '0';	/* get decimal number */
+		if (i > 65535) {
+			if (cnf->card->debug_flags & LOG_CNF_MISC)
+				hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
+			return (-ERR_INV_CHAN);		/* invalid channel */
+		}
+		cnf->channel = i & 0xFFFF;	/* set new channel number */
+		return (0);	/* success */
+	}			/* option */
+	if (*cp == '*') {	/* line to send */
+		if (cnf->card->debug_flags & LOG_CNF_DATA)
+			hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
+		return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
+					 cnf->channel));	/* send the line without * */
+	}			/* line to send */
+	return (0);
+}				/* process_line */
+
+/*************************/
+/* dummy file operations */
+/*************************/
+static loff_t
+hysdn_dummy_lseek(struct file *file, loff_t offset, int orig)
+{
+	return -ESPIPE;
+}				/* hysdn_dummy_lseek */
+
+/***********************************/
+/* conf file operations and tables */
+/***********************************/
+
+/****************************************************/
+/* write conf file -> boot or send cfg line to card */
+/****************************************************/
+static ssize_t
+hysdn_conf_write(struct file *file, const char *buf, size_t count, loff_t * off)
+{
+	struct conf_writedata *cnf;
+	int i;
+	uchar ch, *cp;
+
+	if (&file->f_pos != off)	/* fs error check */
+		return (-ESPIPE);
+	if (!count)
+		return (0);	/* nothing to handle */
+
+	if (!(cnf = file->private_data))
+		return (-EFAULT);	/* should never happen */
+
+	if (cnf->state == CONF_STATE_DETECT) {	/* auto detect cnf or pof data */
+		if (copy_from_user(&ch, buf, 1))	/* get first char for detect */
+			return (-EFAULT);
+
+		if (ch == 0x1A) {
+			/* we detected a pof file */
+			if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
+				return (cnf->needed_size);	/* an error occured -> exit */
+			cnf->buf_size = 0;	/* buffer is empty */
+			cnf->state = CONF_STATE_POF;	/* new state */
+		} else {
+			/* conf data has been detected */
+			cnf->buf_size = 0;	/* buffer is empty */
+			cnf->state = CONF_STATE_CONF;	/* requested conf data write */
+			if (cnf->card->state != CARD_STATE_RUN)
+				return (-ERR_NOT_BOOTED);
+			cnf->conf_line[CONF_LINE_LEN - 1] = 0;	/* limit string length */
+			cnf->channel = 4098;	/* default channel for output */
+		}
+	}			/* state was auto detect */
+	if (cnf->state == CONF_STATE_POF) {	/* pof write active */
+		i = cnf->needed_size - cnf->buf_size;	/* bytes still missing for write */
+		if (i <= 0)
+			return (-EINVAL);	/* size error handling pof */
+
+		if (i < count)
+			count = i;	/* limit requested number of bytes */
+		if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
+			return (-EFAULT);	/* error while copying */
+		cnf->buf_size += count;
+
+		if (cnf->needed_size == cnf->buf_size) {
+			cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);	/* write data */
+			if (cnf->needed_size <= 0) {
+				cnf->card->state = CARD_STATE_BOOTERR;	/* show boot error */
+				return (cnf->needed_size);	/* an error occured */
+			}
+			cnf->buf_size = 0;	/* buffer is empty again */
+		}
+	}
+	/* pof write active */
+	else {			/* conf write active */
+
+		if (cnf->card->state != CARD_STATE_RUN) {
+			if (cnf->card->debug_flags & LOG_CNF_MISC)
+				hysdn_addlog(cnf->card, "cnf write denied -> not booted");
+			return (-ERR_NOT_BOOTED);
+		}
+		i = (CONF_LINE_LEN - 1) - cnf->buf_size;	/* bytes available in buffer */
+		if (i > 0) {
+			/* copy remaining bytes into buffer */
+
+			if (count > i)
+				count = i;	/* limit transfer */
+			if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
+				return (-EFAULT);	/* error while copying */
+
+			i = count;	/* number of chars in buffer */
+			cp = cnf->conf_line + cnf->buf_size;
+			while (i) {
+				/* search for end of line */
+				if ((*cp < ' ') && (*cp != 9))
+					break;	/* end of line found */
+				cp++;
+				i--;
+			}	/* search for end of line */
+
+			if (i) {
+				/* delimiter found */
+				*cp++ = 0;	/* string termination */
+				count -= (i - 1);	/* subtract remaining bytes from count */
+				while ((i) && (*cp < ' ') && (*cp != 9)) {
+					i--;	/* discard next char */
+					count++;	/* mark as read */
+					cp++;	/* next char */
+				}
+				cnf->buf_size = 0;	/* buffer is empty after transfer */
+				if ((i = process_line(cnf)) < 0)	/* handle the line */
+					count = i;	/* return the error */
+			}
+			/* delimiter found */
+			else {
+				cnf->buf_size += count;		/* add chars to string */
+				if (cnf->buf_size >= CONF_LINE_LEN - 1) {
+					if (cnf->card->debug_flags & LOG_CNF_MISC)
+						hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
+					return (-ERR_CONF_LONG);
+				}
+			}	/* not delimited */
+
+		}
+		/* copy remaining bytes into buffer */
+		else {
+			if (cnf->card->debug_flags & LOG_CNF_MISC)
+				hysdn_addlog(cnf->card, "cnf line too long");
+			return (-ERR_CONF_LONG);
+		}
+	}			/* conf write active */
+
+	return (count);
+}				/* hysdn_conf_write */
+
+/*******************************************/
+/* read conf file -> output card info data */
+/*******************************************/
+static ssize_t
+hysdn_conf_read(struct file *file, char *buf, size_t count, loff_t * off)
+{
+	char *cp;
+	int i;
+
+	if (off != &file->f_pos)	/* fs error check */
+		return -ESPIPE;
+
+	if (file->f_mode & FMODE_READ) {
+		if (!(cp = file->private_data))
+			return (-EFAULT);	/* should never happen */
+		i = strlen(cp);	/* get total string length */
+		if (*off < i) {
+			/* still bytes to transfer */
+			cp += *off;	/* point to desired data offset */
+			i -= *off;	/* remaining length */
+			if (i > count)
+				i = count;	/* limit length to transfer */
+			if (copy_to_user(buf, cp, i))
+				return (-EFAULT);	/* copy error */
+			*off += i;	/* adjust offset */
+		} else
+			return (0);
+	} else
+		return (-EPERM);	/* no permission to read */
+
+	return (i);
+}				/* hysdn_conf_read */
+
+/******************/
+/* open conf file */
+/******************/
+static int
+hysdn_conf_open(struct inode *ino, struct file *filep)
+{
+	hysdn_card *card;
+	struct proc_dir_entry *pd;
+	struct conf_writedata *cnf;
+	char *cp, *tmp;
+
+	MOD_INC_USE_COUNT;	/* lock module */
+
+	/* now search the addressed card */
+	card = card_root;
+	while (card) {
+		pd = card->procconf;
+		if (pd->low_ino == (ino->i_ino & 0xFFFF))
+			break;
+		card = card->next;	/* search next entry */
+	}
+	if (!card) {
+		MOD_DEC_USE_COUNT;	/* unlock module */
+		return (-ENODEV);	/* device is unknown/invalid */
+	}
+	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
+		hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
+			     filep->f_uid, filep->f_gid, filep->f_mode);
+
+	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
+		/* write only access -> write boot file or conf line */
+
+		if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
+			MOD_DEC_USE_COUNT;
+			return (-EFAULT);
+		}
+		cnf->card = card;
+		cnf->buf_size = 0;	/* nothing buffered */
+		cnf->state = CONF_STATE_DETECT;		/* start auto detect */
+		filep->private_data = cnf;
+
+	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
+		/* read access -> output card info data */
+
+		if (!(tmp = (char *) kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
+			MOD_DEC_USE_COUNT;
+			return (-EFAULT);	/* out of memory */
+		}
+		filep->private_data = tmp;	/* start of string */
+
+		/* first output a headline */
+		sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
+		cp = tmp;	/* start of string */
+		while (*cp)
+			cp++;
+		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
+			*cp++ = ' ';
+		*cp++ = '\n';
+
+		/* and now the data */
+		sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08x %7d %9d %3d   %s",
+			card->myid,
+			card->bus,
+			PCI_SLOT(card->devfn),
+			card->brdtype,
+			card->irq,
+			card->iobase,
+			card->membase,
+			card->bchans,
+			card->faxchans,
+			card->state,
+			hysdn_net_getname(card));
+		while (*cp)
+			cp++;
+		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
+			*cp++ = ' ';
+		*cp++ = '\n';
+		*cp = 0;	/* end of string */
+	} else {		/* simultaneous read/write access forbidden ! */
+		MOD_DEC_USE_COUNT;	/* unlock module */
+		return (-EPERM);	/* no permission this time */
+	}
+	return (0);
+}				/* hysdn_conf_open */
+
+/***************************/
+/* close a config file.    */
+/***************************/
+static int
+hysdn_conf_close(struct inode *ino, struct file *filep)
+{
+	hysdn_card *card;
+	struct conf_writedata *cnf;
+	int retval = 0;
+	struct proc_dir_entry *pd;
+
+	/* search the addressed card */
+	card = card_root;
+	while (card) {
+		pd = card->procconf;
+		if (pd->low_ino == (ino->i_ino & 0xFFFF))
+			break;
+		card = card->next;	/* search next entry */
+	}
+	if (!card) {
+		return (-ENODEV);	/* device is unknown/invalid */
+	}
+	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
+		hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
+			     filep->f_uid, filep->f_gid, filep->f_mode);
+
+	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
+		/* write only access -> write boot file or conf line */
+		if (filep->private_data) {
+			cnf = filep->private_data;
+
+			if (cnf->state == CONF_STATE_POF)
+				retval = pof_write_close(cnf->card);	/* close the pof write */
+			kfree(filep->private_data);	/* free allocated memory for buffer */
+
+		}		/* handle write private data */
+	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
+		/* read access -> output card info data */
+
+		if (filep->private_data)
+			kfree(filep->private_data);	/* release memory */
+	}
+	MOD_DEC_USE_COUNT;	/* reduce usage count */
+	return (retval);
+}				/* hysdn_conf_close */
+
+/******************************************************/
+/* table for conf filesystem functions defined above. */
+/******************************************************/
+static struct file_operations conf_fops =
+{
+	hysdn_dummy_lseek,
+	hysdn_conf_read,
+	hysdn_conf_write,
+	NULL,			/* readdir */
+	NULL,			/* poll */
+	NULL,			/* ioctl */
+	NULL,			/* mmap */
+	hysdn_conf_open,
+	NULL,			/* flush */
+	hysdn_conf_close,
+	NULL			/* fsync */
+};
+
+static struct inode_operations conf_inode_operations;
+
+/*****************************/
+/* hysdn subdir in /proc/net */
+/*****************************/
+struct proc_dir_entry *hysdn_proc_entry = NULL;
+
+/*******************************************************************************/
+/* hysdn_procconf_init is called when the module is loaded and after the cards */
+/* have been detected. The needed proc dir and card config files are created.  */
+/* The log init is called at last.                                             */
+/*******************************************************************************/
+int
+hysdn_procconf_init(void)
+{
+	hysdn_card *card;
+	uchar conf_name[20];
+
+	hysdn_proc_entry = create_proc_entry(PROC_SUBDIR_NAME, S_IFDIR | S_IRUGO | S_IXUGO, proc_net);
+	if (!hysdn_proc_entry) {
+		printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
+		return (-1);
+	}
+	card = card_root;	/* point to first card */
+	while (card) {
+
+		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
+		if ((card->procconf = (void *) create_proc_entry(conf_name,
+					     S_IFREG | S_IRUGO | S_IWUSR,
+					    hysdn_proc_entry)) != NULL) {
+			memset(&conf_inode_operations, 0, sizeof(struct inode_operations));
+			conf_inode_operations.default_file_ops = &conf_fops;
+
+			((struct proc_dir_entry *) card->procconf)->ops = &conf_inode_operations;
+			hysdn_proclog_init(card);	/* init the log file entry */
+		}
+		card = card->next;	/* next entry */
+	}
+
+	printk(KERN_NOTICE "HYSDN: procfs Rev. %s initialised\n", hysdn_getrev(hysdn_procconf_revision));
+	return (0);
+}				/* hysdn_procconf_init */
+
+/*************************************************************************************/
+/* hysdn_procconf_release is called when the module is unloaded and before the cards */
+/* resources are released. The module counter is assumed to be 0 !                   */
+/*************************************************************************************/
+void
+hysdn_procconf_release(void)
+{
+	hysdn_card *card;
+	uchar conf_name[20];
+
+	card = card_root;	/* start with first card */
+	while (card) {
+
+		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
+		if (card->procconf)
+			remove_proc_entry(conf_name, hysdn_proc_entry);
+
+		hysdn_proclog_release(card);	/* init the log file entry */
+
+		card = card->next;	/* point to next card */
+	}
+
+	remove_proc_entry(PROC_SUBDIR_NAME, proc_net);
+}				/* hysdn_procfs_release */

FUNET's LINUX-ADM group, [email protected]
TCL-scripts by Sam Shen (who was at: [email protected])