| Internet-Draft | RTP-Payload-VDMC | October 2024 |
| HS Yang & de Foy | Expires 21 April 2025 | [Page] |
This memo outlines RTP payload formats for the Video-based Dynamic Mesh Coding (V-DMC), which comprises several types of components, such as a base mesh, a set of displacements, 2D representations of attributes, and an atlas. New RTP payload formats are described for the base mesh and displacement components. The RTP payload header formats enable the packetization of a video stream packet within an RTP packet payload, as well as the fragmentation of a video stream packet into multiple RTP packets.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 21 April 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The advancements in 3D capture, modeling, and rendering have greatly expanded the presence of 3D content across various platforms and devices. However, when left uncompressed, 3D content can incur considerable costs in terms of storage and transmission.¶
In response to this challenge, a visual volumetric video-based coding (V3C) standard [ISO.IEC.23090-05] has been developed to cater to the growing demand for efficient handling of 3D content. V3C is a generic mechanism for volumetric video coding, and it can be used by applications targeting volumetric content. A high-level description of V3C is provided by [I-D.ietf-avtcore-rtp-v3c]. V3C applications today target volumetric data types such as point clouds with Video-based Point Cloud Compression (V-PCC)[ISO.IEC.23090-05] and immersive video with depth, with MPEG Immersive Video (MIV) [ISO.IEC.23090-12].¶
3D mesh is another widely utilized technology for representing immersive content. 3D meshes are continuously evolving to become more sophisticated, inevitably leading to an increase in mesh size. Additionally, dynamic mesh sequences demand substantial data volumes due to the significant amount of temporal information they contain. With respect to this evolution, the V-DMC standard has been developed to facilitate the compression of 3D mesh data using the V3C standard [ISO.IEC.23090-05].¶
This document describes how V-DMC data can be transmitted using the RTP protocol, in line with, and using mechanisms described in [I-D.ietf-avtcore-rtp-v3c] for V3C. Especially, this memo describes RTP payload headers for base mesh and displacement codecs defined by MPEG in [ISO.IEC.23090-29] (appendix H and J, respectively). They are provided in this memo, to ensure that at least one format is available for each V-DMC sub-stream. However, V-DMC is designed to support different base mesh and/or displacement codecs, when they become available.¶
Furthermore, the base mesh and displacement RTP payload format defined in this memo, and its codec defined in [ISO.IEC.23090-29] appendix H and J, can also be used in a non-V-DMC context. This document followed recommendations in [RFC8088] and [RFC2736] for RTP payload format writers.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This document uses the definitions of the Video-based dynamic mesh coding [ISO.IEC.23090-29]. Some of these terms are provided here for convenience.¶
The following definitions are added to the ones found in section 3.1.2 of [I-D.ietf-avtcore-rtp-v3c].¶
attribute map : image for mapping an attribute into a surface of 3D shape.¶
base mesh: a simplified low-resolution approximation of the original mesh.¶
displacement : a set of 3D vectors that are added to the vertices of the subdivided mesh to approximate closely the input mesh surface.¶
submesh : independently decodable region of a base mesh¶
subdivision : process of dividing the mesh faces into a number of sub-faces¶
The following abbreviations are added to the ones found in section 3.2 of [I-D.ietf-avtcore-rtp-v3c].¶
BMD Base mesh Data¶
LOD Level Of Detail¶
V-DMC Video-based Dynamic Mesh Coding¶
V-DMC is a V3C application, which uses the framework described in section 4 of [I-D.ietf-avtcore-rtp-v3c]. As such, a V-DMC encoder converts a 3D representation into multiple representations, the V3C video components, and generates associated data, the atlas, which documents this conversion and enables the reconstruction of the 3D representation by a decoder.¶
The V3C video components used in V-DMC are a base mesh, a set of displacements, and attributes providing additional properties such as texture or material information. Figure 1 represents the 4 types of V3C components altogether used in V-DMC, including these V3C video components and the V3C atlas component.¶
The base mesh component represents a simplified version of the detailed mesh describing the object and it can be encoded using any mesh codec. [ISO.IEC.23090-29] defines a static mesh codec that can used by the generic mechanism of the basemesh codec defined in [ISO.IEC.23090-29]. The displacement component provides displacement vectors which should be applied to the base mesh to obtain the detailed mesh. The displacement component can be encoded either using an arithmetic displacement codec described in [ISO.IEC.23090-29], or alternatively it can be encoded as a V3C geometry video component using any 2D video codec, indicated by the profile or using an SEI message. The attribute components can provide additional properties such as texture or material information, and can be encoded by any video codec. Atlas component provides information to a V3C decoding and rendering system on how to perform inverse reconstruction. The atlas component codec is described in [ISO.IEC.23090-05] and an extension of the V3C atlas codec for V-DMC is described in [ISO.IEC.23090-29].¶
+------------+ Atlas +------------+ | Atlas | sub-bitstream| Atlas | | encoder | ------------>| decoder | +------------+ +------------+ +------------+ Base Mesh +------------+ | Base Mesh | sub-bitstream| Base Mesh | | encoder | ------------>| decoder | +------------+ +------------+ +------------+ Displacement +------------+ |Displacement| sub-bitstream|Displacement| | encoder | ------------>| decoder | +------------+ +------------+ +------------+ Attribute +------------+ | Video | sub-bitstream| Video | | encoder | ------------>| decoder | +------------+ +------------+
Similarly to other V3C applications, in V-DMC, the binary form of the V3C components, i.e., video bitstreams, basemesh bitstream and V3C atlas components, i.e., atlas bitstream, can be grouped and represented by a single V-DMC bitstream. The V-DMC bitstream is composed of a set of V3C units. Each V3C unit has a V3C unit header and a V3C unit payload. The V3C unit header describes the V3C unit type for the payload. V3C unit payload contains V3C video components, V3C atlas components or a V3C parameter set. V3C components, i.e., base mesh, displacement, or attribute components, correspond to video data units (e.g., NAL units defined in [ISO.IEC.23090-29]) that could be decoded by an appropriate video decoder. An example of V-DMC bitstream consisting of a V3C parameter set, atlas bitstream and three video component bitstreams (base mesh, displacement, attribute) is provided in Figure 2.¶
+-------------------+------------------+-------------------+ | V3C Unit(V3C_VPS) | V3C Unit(V3C_AD) | V3C Unit(V3C_BMD) | +-------------------+------------------+-------------------+ | V3C Unit(V3C_GVD) | V3C Unit(V3C_AVD)| V3C Unit(V3C_AD) | ... +-------------------+------------------+-------------------+
The V3C parameter set(VPS) is encapsulated in its own V3C unit, which allows decoupling the transmission of the V3C parameter set from the V3C video and atlas components. The VPS may be transmitted by external means (e.g., as a result of the capability exchange) or through a (reliable or unreliable) control protocol. Section 9 of [I-D.ietf-avtcore-rtp-v3c] provides information on how a V3C parameter set may be signaled as part of session description protocol.¶
V-DMC, since it is a V3C application, uses the V3C parameter set and extends it with additional parameters, defined in [ISO.IEC.23090-29]. Section 9 of this memo provides information on these additional parameters and their signaling in SDP. V3C parameter set signaling in V-DMC may include V3C parameters described in section 9 of [I-D.ietf-avtcore-rtp-v3c] and in the section 9 of this memo.¶
In a V-DMC bitstream the atlas component is identified by a vuh_unit_type field equal to V3C_AD, in the V3C unit header. The atlas component consists of atlas NAL units that define header and payload pairs, see Section 4.3.1. V-DMC video components are identified by a vuh_unit_type field equal to V3C_GVD, V3C_AVD, V3C_BMD. The base mesh information is present in a video component identified by V3C_BMD, which consists of base mesh NAL units that define header and payload pairs, see Section 5.3. The displacement information is present in a video component identified by V3C_GVD. The component identified by V3C_GVD consists of displacement NAL units that define header and payload pairs, see Section 6.3. V3C video components can be further differentiated by other fields in the V3C unit header such as vuh_attribute_index, vuh_attribute_partition_index, vuh_map_index and vuh_auxiliary_video_flag, which are described further below. By mapping V3C parameter set information to vuh_attribute_index, a V3C decoder identifies which attribute a given V3C video component contains, e.g., color.¶
The information supplied by a V3C unit header should be provided in one form or another to a V3C decoder, e.g., as part of SDP as described in this memo in Section 9. The four-byte V3C unit header syntax and semantics are copied below as defined in [ISO.IEC.23090-29], but the syntax is subject to change. Implementations should always refer to the latest specification of [ISO.IEC.23090-29]. The syntax of four-byte V3C unit header is provided here for informative purposes only.¶
v3c_unit_header( ) {
unsigned int(5) vuh_unit_type;
if( vuh_unit_type == V3C_AVD || vuh_unit_type == V3C_GVD ||
vuh_unit_type == V3C_OVD || vuh_unit_type == V3C_AD ||
vuh_unit_type == V3C_CAD || vuh_unit_type == V3C_PVD ||
vuh_unit_type == V3C_BMD) {
unsigned int(4) vuh_v3c_parameter_set_id;
}
if( vuh_unit_type == V3C_AVD || vuh_unit_type == V3C_GVD ||
vuh_unit_type == V3C_OVD || vuh_unit_type == V3C_AD ||
vuh_unit_type == V3C_PVD || vuh_unit_type == V3C_BMD) {
unsigned int(6) vuh_atlas_id;
}
if( vuh_unit_type == V3C_AVD ) {
unsigned int(7) vuh_attribute_index;
unsigned int(5) vuh_attribute_partition_index;
unsigned int(4) vuh_map_index;
unsigned int(1) vuh_auxiliary_video_flag;
}
else if( vuh_unit_type == V3C_GVD ) {
unsigned int(4) vuh_map_index;
unsigned int(1) vuh_auxiliary_video_flag;
bit(12) vuh_reserved_zero_12bits;
}
else if( vuh_unit_type == V3C_OVD || vuh_unit_type == V3C_AD ||
vuh_unit_type == V3C_PVD || vuh_unit_type == V3C_BMD) {
bit(17) vuh_reserved_zero_17bits;
}
else if( vuh_unit_type == V3C_CAD ) {
bit(23) vuh_reserved_zero_23bits;
}
else {
bit(27) vuh_reserved_zero_27bits;
}
}
¶
vuh_unit_type indicates the V3C unit type for the V3C component as specified in [ISO.IEC.23090-29]. As a convenience, the mapping table from vuh_unit_type values to semantics is copied below in Figure 3.¶
+--------+----------+--------------------+----------------------+ |vuh unit|Identifier| V3C unit type | Description | | type | | | | +--------+----------+--------------------+----------------------+ | 0 | V3C_VPS |V3C parameter set |V3C level parameters | +--------+----------+--------------------+----------------------+ | 1 | V3C_AD |Atlas data |Atlas information | +--------+----------+--------------------+----------------------+ | 2 | V3C_OVD |Occupancy video data|(Not used in V-DMC) | +--------+----------+--------------------+----------------------+ | 3 | V3C_GVD |Geometry video data |Geometry information | | | | |(Displacement when | | | | |using a video-based | | | | |codec) | +--------+----------+--------------------+----------------------+ | 4 | V3C_AVD |Attribute video data|Attribute information | +--------+----------+--------------------+----------------------+ | 5 | V3C_PVD |Packed video data |(Not used in V-DMC) | +--------+----------+--------------------+----------------------+ | 6 | |Common atlas data |Information that is | | | | |common for atlases | | | V3C_CAD | |in a CVS(Specified in | | | | |ISO/IEC 23090-12) | +--------+----------+--------------------+----------------------+ | 7 | V3C_BMD | Base Mesh data |Base mesh information | +--------+----------+--------------------+----------------------+
vuh_v3c_parameter_set_id specifies the value of vps_v3c_parameter_set_id for the active V3C VPS.¶
vuh_atlas_id specifies the ID of the atlas that corresponds to the current V3C unit.¶
vuh_attribute_index indicates the index of the attribute data carried in the Attribute Video Data unit.¶
vuh_attribute_partition_index indicates the index of the attribute dimension group carried in the attribute video data unit.¶
vuh_map_index when present indicates the map index of the current geometry or attribute stream. When not present, the map index of the current geometry or attribute sub-bitstream is derived based on the type of the sub-bitstream.¶
vuh_auxiliary_video_flag equal indicates if the associated geometry or attribute video data unit is a RAW and/or EOM coded points video only sub-bitstream.¶
The atlas component provides information to a V3C decoding and/or rendering system on how to perform inverse reconstruction. V-DMC uses an atlas component based on the V3C atlas, including new V-DMC specific parameters defined in [ISO.IEC.23090-29], which do not impact the payload format. For example, the V-DMC atlas component indicates how to perform the subdivision of the base mesh, how to apply the displacement vectors to the subdivided mesh vertices and how to apply attributes to the reconstructed mesh.¶
The V3C atlas RTP payload format described in [ISO.IEC.23090-05] can be used to transport the V-DMC atlas component. Section 4.3.2 of [I-D.ietf-avtcore-rtp-v3c] includes a copy of the syntax and semantics of the V3C atlas NAL unit.¶
The base mesh component is a simplified low-resolution approximation of the original mesh. The base mesh component can be encoded using any mesh codec, including the base mesh codec described in [ISO.IEC.23090-29]. When employing the base mesh codec described in [ISO.IEC.23090-29], data can be transmitted using the RTP payload format specified in Section 5.¶
The base mesh NAL unit (nal_unit(BmNumBytesInNalUnit)) is a byte-aligned syntax structure defined by [ISO.IEC.23090-29] to carry base mesh data. A base mesh NAL unit always contains a 16-bit NAL unit header (bmesh_nal_unit_header()), which indicates among other things the type of the NAL unit (bmesh_nal_unit_type). The payload of a NAL unit refers to the NAL unit excluding the NAL unit header. The base mesh NAL unit syntax and semantics are copied here as defined in [ISO.IEC.23090-29].¶
bmesh_nal_unit_header( ) {
bit(1) bmesh_nal_forbidden_zero_bit
bit(6) bmesh_nal_unit_type
bit(6) bmesh_nal_layer_id
bit(3) bmesh_nal_temporal_id_plus1
}
nal_unit(BmNumBytesInNalUnit){
bmesh_nal_unit_header();
BmNumBytesInRbsp = 0;
for( i = 2; i < BmNumBytesInNalUnit; i++ )
bit(8) rbsp_byte[ BmNumBytesInRbsp++ ];
}
¶
bmesh_nal_forbidden_zero_bit MUST be equal to 0.¶
bmesh_nal_unit_type specifies the type of the RBSP data structure contained in the NAL unit as specified in [ISO.IEC.23090-29]. In particular, the base mesh NAL unit types supported are specified in Table H-11 of [ISO.IEC.23090-29].¶
bmesh_nal_layer_id specifies the identifier of the layer to which an BMCL NAL unit belongs or the identifier of a layer to which a non-BMCL NAL unit applies. The value of bmesh_nal_layer_id shall be in the range of 0 to 62, inclusive.¶
bmesh_nal_temporal_id_plus1 minus 1 specifies a temporal identifier for the NAL unit. The value of nal_temporal_id_plus1 shall not be equal to 0.¶
The displacement component provides displacement vectors, that are used to apply deformation on a mesh over time. The displacement component can be encoded using the arithmetic codec defined in Annex J of [ISO.IEC.23090-29], or alternatively can be encoded as V3C geometry video component using traditional 2D video codec, when employing a 2D codec, data can be transmitted using the RTP payload format specified for the codec. When employing the arithmetic codec defined in Annex J of [ISO.IEC.23090-29], data can be transmitted using the RTP payload format specified in Section 6.¶
The displacement NAL unit (nal_unit(NumBytesInNalUnit)) is a byte-aligned syntax structure defined by [ISO.IEC.23090-29] to carry displacement data. A displacement NAL unit always contains a 16-bit NAL unit header (displ_nal_unit_header()), which indicates among other things the type of the NAL unit (displ_nal_unit_type). The payload of a NAL unit refers to the NAL unit excluding the NAL unit header. The displacement NAL unit syntax and semantics are copied here as defined in [ISO.IEC.23090-29].¶
displ_nal_unit_header( ) {
bit(1) displ_nal_forbidden_zero_bit
bit(6) displ_nal_unit_type
bit(6) displ_nal_layer_id
bit(3) displ_nal_temporal_id_plus1
}
nal_unit(NumBytesInNalUnit){
displ_nal_unit_header();
NumBytesInRbsp = 0;
for( i = 2; i < NumBytesInNalUnit; i++ )
bit(8) rbsp_byte[ NumBytesInRbsp++ ];
}
¶
displ_nal_forbidden_zero_bit MUST be equal to 0.¶
displ_nal_unit_type specifies the type of the RBSP data structure contained in the NAL unit as specified in [ISO.IEC.23090-29]. In particular, the displacement NAL unit types supported are specified in Table J-11 of [ISO.IEC.23090-29].¶
displ_nal_layer_id is specifies the identifier of the layer to which an DCL NAL unit belongs or the identifier of a layer to which a non-DCL NAL unit applies. The value of displ_nal_layer_id shall be in the range of 0 to 62, inclusive.¶
displ_nal_temporal_id_plus1 is minus 1 specifies a temporal identifier for the NAL unit. The value of nal_temporal_id_plus1 shall not be equal to 0.¶
This section describes details related to the RTP payload format definitions for the V-DMC base mesh codec defined in Annex H of [ISO.IEC.23090-29]. Aspects related to RTP header, RTP payload header and general payload structure are considered. As discussed in Section 4.3, a V-DMC stream may alternatively use another base mesh codec, in which case the RTP payload described in this section would not be applicable.¶
The RTP header is defined in [RFC3550] and represented in Figure 4. Some of the header field values are interpreted as follows.¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|V=2|P|X| CC |M| PT | sequence number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| synchronization source (SSRC) identifier |
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
| contributing source (CSRC) identifiers |
| .... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Marker bit (M): 1 bit¶
Set for the last packet of the access unit, carried in the current RTP stream. This is in line with the normal use of the M bit in video formats to allow an efficient playout buffer handling.¶
Payload type (PT): 7 bits¶
The assignment of a payload type MUST be performed either through the profile used or in a dynamic way.¶
Sequence Number (SN): 16 bits¶
Set and used in accordance with [RFC3550]¶
Timestamp : 32 bits¶
The RTP timestamp is set to the sampling timestamp of the content. A 90 kHz clock rate MUST be used.¶
If the NAL unit has no timing properties of its own (e.g., set and SEI NAL units), the RTP timestamp MUST be set to the RTP timestamp of the coded basemesh of the access unit in which the NAL unit (according to Section H of [ISO.IEC.23090-29] is included.¶
Receivers MUST use the RTP timestamp for the display process, even when the bitstream contains basemesh frame timing SEI messages as specified in [ISO.IEC.23090-29].¶
Synchronization source (SSRC): 32 bits¶
Used to identify the source of the RTP packets. By definition a single SSRC is used for all parts of a single bitstream. The remaining RTP header fields are used as specified in [RFC3550].¶
The RTP Payload Header follows the RTP header. Figure 5 describes RTP Payload Header.¶
0 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|F| NUT | NLI | TID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
F : bmesh_nal_forbidden_zero_bit specified in [ISO.IEC.23090-29] MUST be equal to 0.¶
NUT : bmesh_nal_unit_type as specified in [ISO.IEC.23090-29] define the type of the RBSP data structure contained in the NAL unit as specified in [ISO.IEC.23090-29]. In particular, the base mesh NAL unit types supported are specified in Table H-11 of [ISO.IEC.23090-29].¶
NLI : bmesh_nal_layer_id as specified in [ISO.IEC.23090-29] defines the identifier of the layer to which an BMCL NAL unit belongs or the identifier of a layer to which a non-BMCL NAL unit applies. The value of nal_layer_id shall be in the range of 0 to 62, inclusive.¶
TID : bmesh_nal_temporal_id_plus1 minus 1 as specified in [ISO.IEC.23090-29] defines a temporal identifier for the NAL unit. The value of bmesh_nal_temporal_id_plus1 shall not be equal to 0.¶
Three different types of RTP packet payload structures are specified. A receiver can identify the payload structure by the first two bytes of the RTP packet payload, which co-serves as the RTP payload header. These two bytes are always structured as a NAL unit header. The NAL unit type field indicates which structure is present in the payload.¶
The three different payload structures are as follows:¶
Single NAL Unit Packet: Contains a single NAL unit in the payload. This payload structure is specified in Section 5.4.2.¶
Aggregation Packet: Contains multiple NAL units in a single RTP payload. This payload structure is specified in Section 5.4.3.¶
Fragmentation Unit: Contains a subset of a single NAL unit. This payload structure is specified in Section 5.4.4.¶
NOTE: (informative) This memo does not limit the size of NAL units encapsulated in NAL unit packets and fragmentation units. [ISO.IEC.23090-29] does not restrict the maximum size of a NAL unit directly either. Instead, a NAL unit sample stream format may be used, which provides flexibility to signal NAL unit size up to UINT64_MAX bytes.¶
Single NAL unit packet contains exactly one NAL unit, and consists of an RTP payload header and following conditional fields: 16-bit DONL and 16-bit vdmc-sm-id. The rest of the payload data contain the NAL unit payload data (excluding the NAL unit header). Single NAL unit packet MUST only contain atlas NAL units of the types defined in Table H-11 of [ISO.IEC.23090-29]. The structure of the single NAL unit packet is shown below in Figure 6.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header | DONL (conditional) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | vdmc-sm-id (cond) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | NAL unit data | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RTP payload header MUST be an exact copy of the NAL unit header of the contained NAL unit.¶
A NAL unit stream composed by de-packetizing single NAL unit packets in RTP sequence number order MUST conform to the NAL unit decoding order, when DONL is not present.¶
The DONL field, when present, specifies the value of the 16-bit decoding order number of the contained NAL unit. If sprop-max-don-diff is greater than 0 for any of the RTP streams, the DONL field MUST be present, and the variable DONL for the contained NAL unit is derived as equal to the value of the DONL field. Otherwise (sprop-max-don-diff is equal to 0 for all the RTP streams), the DONL field MUST NOT be present.¶
The vdmc-sm-id field, when present, specifies the 16-bit submesh identifier for the NAL unit, as signaled in basemesh header defined in [ISO.IEC.23090-29]. If sprop-vdmc-sm-id-pres is equal to 1 and RTP payload header NUT is in range 0-29, inclusive, the vdmc-sm-id field MUST be present. Otherwise, the vdmc-sm-id field MUST NOT be present.¶
NOTE: (informative) Only values for NAL unit type (NUT) in range 0-29, inclusive, are allocated for bash mesh submesh layer unit data in [ISO.IEC.23090-29].¶
Aggregation Packets (APs) enable the reduction of packetization overhead for small NAL units, such as most of the non-BMCL NAL units, which are often only a few octets in size.¶
Aggregation packets MAY be used wrap multiple NAL units belonging to the same access unit in a single RTP payload. The first two bytes of the AP MUST contain RTP payload header. The NAL unit type (NUT) for the NAL unit header contained in the RTP payload header MUST be equal to 45, which falls in the unspecified range of the NAL unit types defined in [ISO.IEC.23090-29]. AP MAY contain a conditional vdmc-sm-id field. AP MUST contain two or more aggregation units. The structure of AP is shown in Figure 7.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header (NUT=45) | vdmc-sm-id (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | Two or more aggregation units | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The fields in the payload header are set as follows. The F bit MUST be equal to 0 if the F bit of each aggregated NAL unit is equal to zero; otherwise, it MUST be equal to 1. The NUT field MUST be equal to 45. The value of NLI MUST be equal to the lowest value of NLI of all the aggregated NAL units. The value of TID MUST be the lowest value of TID of all the aggregated NAL units.¶
All BMCL NAL units in an aggregation packet have the same TID value since they belong to the same access unit. However, the packet MAY contain non-BMCL NAL units for which the TID value in the NAL unit header MAY be different than the TID value of the BMCL NAL units in the same AP.¶
The vdmc-sm-id field, when present, specifies the 16-bit basemehs identifier for all BMCL NAL units in the AP. If sprop-vdmc-sm-id-pres is equal to 1, the vdmc-sm-id field MUST be present. Otherwise, the vdmc-sm-id field MUST NOT be present.¶
AP MUST carry at least two aggregation units (AU) and can carry as many aggregation units as necessary. However, the total amount of data in an AP MUST fit into an IP packet, and the size SHOULD be chosen so that the resulting IP packet is smaller than the MTU size so to avoid IP layer fragmentation. The structure of the AU depends both on the presence of the decoding order number, the sequence order of the AU in the AP and the presence of vdmc-sm-id field. The structure of an AU is shown in Figure 8.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DOND (cond) / DONL (cond) | vdmc-sm-id (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | NALU size | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | NAL unit | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
If sprop-max-don-diff is greater than 0 for any of the RTP streams, an AU begins with the DOND / DONL field. The first AU in the AP contains DONL field, which specifies the 16-bit value of the decoding order number of the aggregated NAL unit. The variable DON for the aggregated NAL unit is derived as equal to the value of the DONL field. All subsequent AUs in the AP MUST contain an (8-bit) DOND field, which specifies the difference between the decoding order number values of the current aggregated NAL unit and the preceding aggregated NAL unit in the same AP. The variable DON for the aggregated NAL unit is derived as equal to the DON of the preceding aggregated NAL unit in the same AP plus the value of the DOND field plus 1 modulo 65536.¶
When sprop-max-don-diff is equal to 0 for all the RTP streams, DOND / DONL fields MUST NOT be present in an aggregation unit. The aggregation units MUST be stored in the aggregation packet so that the decoding order of the containing NAL units is preserved. This means that the first aggregation unit in the aggregation packet SHOULD contain the NAL unit that SHOULD be decoded first.¶
If sprop-vdmc-sm-id-pres is equal to 2 and the AU NAL unit header type is in range 0-29, inclusive, the 16-bit vdmc-sm-id field MUST be present in the aggregation unit after the conditional DOND/DONL field. Otherwise vdmc-sm-id field MUST NOT be present in the aggregation unit.¶
The conditional fields of the aggregation unit are followed by a 16-bit NALU size field, which provides the size of the NAL unit (in bytes) in the aggregation unit. The remainder of the data in the aggregation unit SHOULD contain the NAL unit (including the unmodified NAL unit header).¶
Fragmentation Units (FUs) are introduced to enable fragmenting a single NAL unit into multiple RTP packets, possibly without co-operation or knowledge of the encoder. A fragment of a NAL unit consists of an integer number of consecutive octets of that NAL unit. Fragments of the same NAL unit MUST be sent in consecutive order with ascending RTP sequence numbers (with no other RTP packets within the same RTP stream being sent between the first and last fragment.¶
When a NAL unit is fragmented and conveyed within FUs, it is referred to as a fragmented NAL unit. Aggregation packets MUST NOT be fragmented. FUs MUST NOT be nested; i.e., an FU MUST NOT contain a subset of another FU. The RTP header timestamp of an RTP packet carrying an FU is set to the NALU-time of the fragmented NAL unit.¶
A FU consists of an RTP payload header with NUT equal to a 46, an 8-bit FU header, a conditional 16-bit DONL field, a conditional 16-bit vdmc-sm-id field and an FU payload. The structure of an FU is illustrated below in Figure 9.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header (NUT=46) | FU header | DONL (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DONL (cond) | vdmc-sm-id (cond) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | FU payload | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The following packetization rules apply for V-DMC data:¶
If sprop-max-don-diff is greater than 0 for any of the RTP streams, the transmission order of NAL units carried in the RTP stream MAY be different than the NAL unit decoding order and the NAL unit output order. Otherwise (sprop-max-don-diff is equal to 0 for all the RTP streams), the transmission order of NAL units carried in the RTP stream MUST be the same as the NAL unit decoding order.¶
A NAL unit of a small size SHOULD be encapsulated in an aggregation packet together with one or more other NAL units in order to avoid the unnecessary packetization overhead for small NAL units. For example, non-BMCL NAL units such as access unit delimiters, parameter sets, or SEI NAL units are typically small and can often be aggregated with BMCL NAL units without violating MTU size constraints.¶
Each non-BMCL NAL unit SHOULD, when possible, from an MTU size perspective, be encapsulated in an aggregation packet together with its associated BMCL NAL unit, as typically a non-BMCL NAL unit would be meaningless without the associated BMCL NAL unit being available.¶
For carrying exactly one NAL unit in an RTP packet, a single NAL unit packet MUST be used¶
The general concept behind de-packetization is to get the NAL units out of the RTP packets in an RTP stream and all RTP streams the RTP stream depends on, if any, and pass them to the decoder in the NAL unit decoding order. The de-packetization process is implementation dependent. Therefore, the following de-packetization rules SHOULD be taken as an example.¶
All normal RTP mechanisms related to buffer management apply. In particular, duplicated or outdated RTP packets (as indicated by the RTP sequence number and the RTP timestamp) are removed. To determine the exact time for decoding, factors such as a possible intentional delay to allow for proper inter-stream synchronization must be factored in.¶
NAL units with NAL unit type values in the range of 0 to 44, inclusive, MAY be passed to the decoder. NAL-unit-like structures with NAL unit type values in the range of 45 to 63, inclusive, MUST NOT be passed to the decoder.¶
When sprop-max-don-diff is equal to 0 for the received RTP stream, the NAL units carried in the RTP stream MAY be directly passed to the decoder in their transmission order, which is identical to their decoding order.¶
When sprop-max-don-diff is greater than 0 for any of the received RTP streams, the received NAL units need to be arranged into decoding order before handing them over to the decoder.¶
For further de-packetization examples, the reader is referred to Section 6 of [RFC7798].¶
Regarding the packetization of V3C video component data, the respective RTP video payload specification(s) define how packetization and de-packetization SHOULD be handled.¶
This section describes details related to the RTP payload format definitions for the V-DMC arithmetic displacement codec defined in Annex J of [ISO.IEC.23090-29]. Aspects related to RTP header, RTP payload header and general payload structure are considered. As discussed in Section 4.3, a V-DMC stream may alternatively use another displacement codec, in which case the RTP payload described in this section would not be applicable.¶
The RTP header is defined in [RFC3550] and represented in Figure 10. Some of the header field values are interpreted as follows.¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|V=2|P|X| CC |M| PT | sequence number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| synchronization source (SSRC) identifier |
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
| contributing source (CSRC) identifiers |
| .... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Marker bit (M): 1 bit¶
Set for the last packet of the access unit, carried in the current RTP stream. This is in line with the normal use of the M bit in video formats to allow an efficient playout buffer handling.¶
Payload type (PT): 7 bits¶
The assignment of a payload type MUST be performed either through the profile used or in a dynamic way.¶
Sequence Number (SN): 16 bits¶
Set and used in accordance with [RFC3550]¶
Timestamp : 32 bits¶
The RTP timestamp is set to the sampling timestamp of the content. A 90 kHz clock rate MUST be used.¶
If the NAL unit has no timing properties of its own (e.g., set and SEI NAL units), the RTP timestamp MUST be set to the RTP timestamp of the coded displacement of the access unit in which the NAL unit (according to Section J of [ISO.IEC.23090-29] is included.¶
Receivers MUST use the RTP timestamp for the display process, even when the bitstream contains displacement frame timing SEI messages as specified in [ISO.IEC.23090-29].¶
Synchronization source (SSRC): 32 bits¶
Used to identify the source of the RTP packets. By definition a single SSRC is used for all parts of a single bitstream. The remaining RTP header fields are used as specified in [RFC3550].¶
The RTP Payload Header follows the RTP header. Figure 11 describes RTP Payload Header.¶
0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |F| NUT | NLI | TID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
F : displ_nal_forbidden_zero_bit specified in [ISO.IEC.23090-29] MUST be equal to 0.¶
NUT : displ_nal_unit_type as specified in [ISO.IEC.23090-29] define the type of the RBSP data structure contained in the NAL unit as specified in [ISO.IEC.23090-29]. In particular, the base mesh NAL unit types supported are specified in Table J-11 of [ISO.IEC.23090-29].¶
NLI : displ_nal_layer_id as specified in [ISO.IEC.23090-29] defines the identifier of the layer to which an BMCL NAL unit belongs or the identifier of a layer to which a non-BMCL NAL unit applies. The value of displ_nal_layer_id shall be in the range of 0 to 62, inclusive.¶
TID : displ_nal_temporal_id_plus1 minus 1 as specified in [ISO.IEC.23090-29] defines a temporal identifier for the NAL unit. The value of displ_nal_temporal_id_plus1 shall not be equal to 0.¶
Three different types of RTP packet payload structures are specified. A receiver can identify the payload structure by the first two bytes of the RTP packet payload, which co-serves as the RTP payload header. These two bytes are always structured as a NAL unit header. The NAL unit type field indicates which structure is present in the payload.¶
The three different payload structures are as follows:¶
Single NAL Unit Packet: Contains a single NAL unit in the payload. This payload structure is specified in Section 6.4.2¶
Aggregation Packet: Contains multiple NAL units in a single RTP payload. This payload structure is specified in Section 6.4.3.¶
Fragmentation Unit: Contains a subset of a single NAL unit. This payload structure is specified in Section 6.4.4.¶
NOTE: (informative) This memo does not limit the size of NAL units encapsulated in NAL unit packets and fragmentation units. [ISO.IEC.23090-29] does not restrict the maximum size of a NAL unit directly either. Instead, a NAL unit sample stream format may be used, which provides flexibility to signal NAL unit size up to UINT64_MAXUINT64_MAX bytes.¶
Single NAL unit packet contains exactly one NAL unit, and consists of an RTP payload header and following conditional fields: 16-bit DONL and 16-bit vdmc-disp-id. The rest of the payload data contain the NAL unit payload data (excluding the NAL unit header). Single NAL unit packet MUST only contain atlas NAL units of the types defined in Table J-11 of [ISO.IEC.23090-29]. The structure of the single NAL unit packet is shown below in Figure 12¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header | DONL (conditional) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | vdmc-disp-id (cond) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | NAL unit data | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RTP payload header MUST be an exact copy of the NAL unit header of the contained NAL unit.¶
A NAL unit stream composed by de-packetizing single NAL unit packets in RTP sequence number order MUST conform to the NAL unit decoding order, when DONL is not present.¶
The DONL field, when present, specifies the value of the 16-bit decoding order number of the contained NAL unit. If sprop-max-don-diff is greater than 0 for any of the RTP streams, the DONL field MUST be present, and the variable DONL for the contained NAL unit is derived as equal to the value of the DONL field. Otherwise (sprop-max-don-diff is equal to 0 for all the RTP streams), the DONL field MUST NOT be present.¶
The vdmc-disp-id field, when present, specifies the 16-bit displacement identifier for the NAL unit, as signaled in displacement header defined in [ISO.IEC.23090-29]. If sprop-vdmc-disp -id-pres is equal to 1 and RTP payload header NUT is in range 0-29, inclusive, the vdmc-disp-id field MUST be present. Otherwise, the vdmc-disp-id field MUST NOT be present.¶
NOTE: (informative) Only values for NAL unit type (NUT) in range 0-29, inclusive, are allocated for displacement layer unit data in [ISO.IEC.23090-29].¶
Aggregation Packets (APs) enable the reduction of packetization overhead for small NAL units, such as most of the non-DCL NAL units, which are often only a few octets in size.¶
Aggregation packets MAY be used wrap multiple NAL units belonging to the same access unit in a single RTP payload. The first two bytes of the AP MUST contain RTP payload header. The NAL unit type (NUT) for the NAL unit header contained in the RTP payload header MUST be equal to 47, which falls in the unspecified range of the NAL unit types defined in [ISO.IEC.23090-29]. AP MAY contain a conditional vdmc-disp-id field. AP MUST contain two or more aggregation units. The structure of AP is shown in Figure 13.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header (NUT=47) | vdmc-disp-id (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | Two or more aggregation units | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The fields in the payload header are set as follows. The F bit MUST be equal to 0 if the F bit of each aggregated NAL unit is equal to zero; otherwise, it MUST be equal to 1. The NUT field MUST be equal to 47. The value of NLI MUST be equal to the lowest value of NLI of all the aggregated NAL units. The value of TID MUST be the lowest value of TID of all the aggregated NAL units.¶
All DCL NAL units in an aggregation packet have the same TID value since they belong to the same access unit. However, the packet MAY contain non-DCL NAL units for which the TID value in the NAL unit header MAY be different than the TID value of the DCL NAL units in the same AP.¶
The vdmc-disp-id field, when present, specifies the 16-bit displacement identifier for all DCL NAL units in the AP. If sprop-vdmc-disp-id-pres is equal to 1, the vdmc-disp-id field MUST be present. Otherwise, the vdmc-disp-id field MUST NOT be present.¶
AP MUST carry at least two aggregation units (AU) and can carry as many aggregation units as necessary. However, the total amount of data in an AP MUST fit into an IP packet, and the size SHOULD be chosen so that the resulting IP packet is smaller than the MTU size so to avoid IP layer fragmentation. The structure of the AU depends both on the presence of the decoding order number, the sequence order of the AU in the AP and the presence of vdmc-disp-id field. The structure of an AU is shown in Figure 14.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DOND (cond) / DONL (cond) | vdmc-disp-id (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | NALU size | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | NAL unit | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
If sprop-max-don-diff is greater than 0 for any of the RTP streams, an AU begins with the DOND / DONL field. The first AU in the AP contains DONL field, which specifies the 16-bit value of the decoding order number of the aggregated NAL unit. The variable DON for the aggregated NAL unit is derived as equal to the value of the DONL field. All subsequent AUs in the AP MUST contain an (8-bit) DOND field, which specifies the difference between the decoding order number values of the current aggregated NAL unit and the preceding aggregated NAL unit in the same AP. The variable DON for the aggregated NAL unit is derived as equal to the DON of the preceding aggregated NAL unit in the same AP plus the value of the DOND field plus 1 modulo 65536.¶
When sprop-max-don-diff is equal to 0 for all the RTP streams, DOND / DONL fields MUST NOT be present in an aggregation unit. The aggregation units MUST be stored in the aggregation packet so that the decoding order of the containing NAL units is preserved. This means that the first aggregation unit in the aggregation packet SHOULD contain the NAL unit that SHOULD be decoded first.¶
If sprop-vdmc-disp-id-pres is equal to 2 and the AU NAL unit header type is in range 0-29, inclusive, the 16-bit vdmc-disp-id field MUST be present in the aggregation unit after the conditional DOND/DONL field. Otherwise vdmc-disp-id field MUST NOT be present in the aggregation unit.¶
The conditional fields of the aggregation unit are followed by a 16-bit NALU size field, which provides the size of the NAL unit (in bytes) in the aggregation unit. The remainder of the data in the aggregation unit SHOULD contain the NAL unit (including the unmodified NAL unit header).¶
Fragmentation Units (FUs) are introduced to enable fragmenting a single NAL unit into multiple RTP packets, possibly without co-operation or knowledge of the encoder. A fragment of a NAL unit consists of an integer number of consecutive octets of that NAL unit. Fragments of the same NAL unit MUST be sent in consecutive order with ascending RTP sequence numbers (with no other RTP packets within the same RTP stream being sent between the first and last fragment.¶
When a NAL unit is fragmented and conveyed within FUs, it is referred to as a fragmented NAL unit. Aggregation packets MUST NOT be fragmented. FUs MUST NOT be nested; i.e., an FU MUST NOT contain a subset of another FU. The RTP header timestamp of an RTP packet carrying an FU is set to the NALU-time of the fragmented NAL unit. A FU consists of an RTP payload header with NUT equal to a 63, an 8-bit FU header, a conditional 16-bit DONL field, a conditional 16-bit vdmc-disp-id field and an FU payload. The structure of an FU is illustrated below in Figure 15.¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | RTP payload header (NUT=46) | FU header | DONL (cond) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | DONL (cond) | vdmc-disp-id (cond) | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | FU payload | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | :...OPTIONAL RTP padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The following packetization rules apply for V-DMC data: - If sprop-max-don-diff is greater than 0 for any of the RTP streams, the transmission order of NAL units carried in the RTP stream MAY be different than the NAL unit decoding order and the NAL unit output order. Otherwise (sprop-max-don-diff is equal to 0 for all the RTP streams), the transmission order of NAL units carried in the RTP stream MUST be the same as the NAL unit decoding order. - A NAL unit of a small size SHOULD be encapsulated in an aggregation packet together with one or more other NAL units in order to avoid the unnecessary packetization overhead for small NAL units. For example, non-DCL NAL units such as access unit delimiters, parameter sets, or SEI NAL units are typically small and can often be aggregated with DCL NAL units without violating MTU size constraints. - Each non-DCL NAL unit SHOULD, when possible, from an MTU size perspective, be encapsulated in an aggregation packet together with its associated DCL NAL unit, as typically a non-DCL NAL unit would be meaningless without the associated DCL NAL unit being available. - For carrying exactly one NAL unit in an RTP packet, a single NAL unit packet MUST be used¶
The general concept behind de-packetization is to get the NAL units out of the RTP packets in an RTP stream and all RTP streams the RTP stream depends on, if any, and pass them to the decoder in the NAL unit decoding order.¶
The de-packetization process is implementation dependent. Therefore, the following de-packetization rules SHOULD be taken as an example.¶
All normal RTP mechanisms related to buffer management apply. In particular, duplicated or outdated RTP packets (as indicated by the RTP sequence number and the RTP timestamp) are removed. To determine the exact time for decoding, factors such as a possible intentional delay to allow for proper inter-stream synchronization must be factored in.¶
NAL units with NAL unit type values in the range of 0 to 44, inclusive, MAY be passed to the decoder. NAL-unit-like structures with NAL unit type values in the range of 45 to 63, inclusive, MUST NOT be passed to the decoder.¶
When sprop-max-don-diff is equal to 0 for the received RTP stream, the NAL units carried in the RTP stream MAY be directly passed to the decoder in their transmission order, which is identical to their decoding order.¶
When sprop-max-don-diff is greater than 0 for any of the received RTP streams, the received NAL units need to be arranged into decoding order before handing them over to the decoder.¶
For further de-packetization examples, the reader is referred to Section 6 of [RFC7798].¶
Regarding the packetization of V3C video component data, the respective RTP video payload specification(s) define how packetization and de-packetization SHOULD be handled.¶
This section describes payload format optional parameters. A mapping of the parameters into the Session Description Protocol (SDP) [RFC8866] is also provided for applications that use SDP. Equivalent parameters could be defined elsewhere for use with control protocols that do not use SDP.¶
The receiver MUST ignore any parameter unspecified in this memo.¶
Type name: application¶
Subtype name: mpgbm¶
Required parameters : N/A¶
Optional parameters: sprop-v3c-unit-header, sprop-v3c-unit-type, sprop-v3c-vps-id, sprop-v3c-atlas-id, sprop-v3c-attr-idx, sprop-v3c-attr-part-idx, sprop-v3c-map-idx, sprop-v3c-aux-video-flag, sprop-max-don-diff, sprop-v3c-parameter-set,sprop-vdmc-sm-id-pres, v3c-ptl-level-idc, v3c-ptl-tier-flag, v3c-ptl-codec-idc, v3c-ptl-toolset-idc, v3c-ptl-rec-idc, vdmc-lod, bmesh-seq-set, bmesh-intra-codec, bmesh-inter-codec, bmesh-level-idc, bmesh-tier-flag, bmesh-codec-idc, bmesh-toolset-idc.¶
Encoding considerations: This type is only defined for transfer via RTP [RFC3550].¶
Security considerations: Please see Section 11.¶
Interoperability considerations: N/A¶
Published specification: Please refer to [ISO.IEC.23090-29]¶
Applications that use this media type: Any application that relies on V-DMC-based media services over RTP.¶
Additional information: N/A¶
Person & email address to contact for further information:¶
Intended usage: COMMON¶
Restrictions on usage: N/A¶
Author: See Authors' Addresses section of this memo.¶
Change controller: IETF [email protected]¶
Provisional registration? (standards tree only): No¶
The receiver MUST ignore any parameter unspecified in this memo.¶
Type name: application¶
Subtype name: mpgdisp¶
Required parameters : N/A¶
Optional parameters: sprop-v3c-unit-header, sprop-v3c-unit-type, sprop-v3c-vps-id, sprop-v3c-atlas-id, sprop-v3c-attr-idx, sprop-v3c-attr-part-idx, sprop-v3c-map-idx, sprop-v3c-aux-video-flag, sprop-max-don-diff, sprop-v3c-parameter-set,sprop-vdmc-sm-id-pres, v3c-ptl-level-idc, v3c-ptl-tier-flag, v3c-ptl-codec-idc, v3c-ptl-toolset-idc, v3c-ptl-rec-idc, vdmc-lod, bmesh-seq-set, bmesh-intra-codec, bmesh-inter-codec, bmesh-level-idc, bmesh-tier-flag, bmesh-codec-idc, bmesh-toolset-idc.¶
Encoding considerations: This type is only defined for transfer via RTP [RFC3550].¶
Security considerations: Please see Section 11.¶
Interoperability considerations: N/A¶
Published specification: Please refer to [ISO.IEC.23090-29]¶
Applications that use this media type: Any application that relies on V-DMC-based media services over RTP.¶
Additional information: N/A¶
Person & email address to contact for further information:¶
Intended usage: COMMON¶
Restrictions on usage: N/A¶
Author: See Authors' Addresses section of this memo.¶
Change controller: IETF [email protected]¶
Provisional registration? (standards tree only): No¶
Optional parameters definition in section 7.2. of [I-D.ietf-avtcore-rtp-v3c] are applicable, unless updated in this section, which describes new and updated optional parameters definitions.¶
Parameters defined in [I-D.ietf-avtcore-rtp-v3c]¶
sprop-v3c-unit-header, sprop-v3c-unit-type, sprop-v3c-vps-id, sprop-v3c-atlas-id, sprop-v3c-attr-idx, sprop-v3c-attr-part-idx, sprop-v3c-map-idx, sprop-v3c-aux-video-flag, sprop-max-don-diff, sprop-v3c-parameter-set, v3c-ptl-level-idc, v3c-ptl-tier-flag, v3c-ptl-codec-idc, v3c-ptl-toolset-idc, v3c-ptl-rec-idc.¶
The possible values of sprop-v3c-unit-type are updated by this memo. sprop-v3c-unit-type provides a V3C unit type value corresponding to vuh_unit_type defined in [ISO.IEC.23090-29], i.e., defines V3C sub- bitstream type. [ISO.IEC.23090-29] only adds new values and does not modify the values previously defined in [ISO.IEC.23090-05].¶
New optional parameters defined in this memo¶
bmesh-seq-set:¶
bmesh-seq-set provides an identifier for the base mesh sequence parameter set for reference by other syntax elements defined in [ISO.IEC.23090-29]. It corresponds to bmsps_sequence_parameter_set_id defined in [ISO.IEC.23090-29].¶
bmesh-intra-codec:¶
bmesh-intra-codec indicates a mapping index of a codec identifier of the static mesh decoder used to decode the static base mesh sub bitstream. bmesh-intra-codec shall be in the range of 0 to 255, inclusive defined in [ISO.IEC.23090-29]. It corresponds to bmsps_intra_mesh_codec_id defined in [ISO.IEC.23090-29].¶
bmesh-inter-codec:¶
bmesh-inter-codec indicates a mapping index of a codec identifier of the decoder used to decode the motion data. bmesh-inter-codec shall be in the range of 0 to 255, inclusive defined in [ISO.IEC.23090-29]. It corresponds to bmsps_inter_mesh_codec_id defined in [ISO.IEC.23090-29].¶
bmesh-level-idc:¶
bmesh-level-idc indicates a level to which the coded V3C sequence (CVS) conforms. It corresponds to bmptl_level_idc defined in [ISO.IEC.23090-29].¶
bmesh-tier-flag:¶
bmesh-tier-flag specifies the tier context for the interpretation of bmptl_level_idc. It corresponds to bmptl_tier_flag defined in [ISO.IEC.23090-29].¶
bmesh-codec-idc:¶
bmesh-codec-idc indicates the codec group profile component to which the CVS conforms. It corresponds to bmptl_profile_codec_group_idc defined in [ISO.IEC.23090-29].¶
bmesh-toolset-idc:¶
bmesh-toolset-idc indicates the toolset combination profile component to which the CVS conforms. It corresponds to bmptl_profile_toolset_idc defined in [ISO.IEC.23090-29].¶
vdmc-lod:¶
vdmc-lod specifies the support for signalling and adjusting the level of detail in the stream, and for example indicate the maximum value for the LoD index in the Atlas, basemesh, displacement, Attribute and any other V-DMC components. vdmc-lod correspond to lod_index in [ISO.IEC.23090-10].¶
sprop-vdmc-sm-id-pres:¶
sprop-vdmc-sm-id-pres indicates that the RTP packets contain vdmc-sm-id field.¶
disp-seq-set:¶
disp-seq-set provides an identifier for the base mesh sequence parameter set for reference by other syntax elements defined in [ISO.IEC.23090-29]. It corresponds to dsps_sequence_parameter_set_id defined in [ISO.IEC.23090-29].¶
disp-codec:¶
disp-codec indicates the identifier of the codec used to compress the displacement. disp-codec shall be in the range of 0 to 255, inclusive. It corresponds to dsps_coded_id defined in [ISO.IEC.23090-29].¶
disp-level-idc:¶
disp_level_idc indicates a level to which the CDS conforms as specified in Annex J of [ISO.IEC.23090-29]. The disp_level_idc parameter corresponds to dptl_level_idc defined in [ISO.IEC.23090-29].¶
disp-tier-flag:¶
disp_tier_flag specifies the tier context for the interpretation of dptl_level_idc as specified in Annex J of [ISO.IEC.23090-29]. It corresponds to dptl_tier_flag defined in [ISO.IEC.23090-29].¶
disp-codec-idc:¶
dptl_profile_codec_group_idc indicates the codec group profile component to which the CDS conforms as specified in Annex J of [ISO.IEC.23090-29]. It corresponds to dptl_profile_codec_group_idc defined in [ISO.IEC.23090-29].¶
disp-toolset-idc:¶
disp-toolset-idc indicates the toolset combination profile component to which the CDS conforms as specified in Annex J of [ISO.IEC.23090-29]. It corresponds to dptl_profile_toolset_idc defined in [ISO.IEC.23090-29].¶
disp-level-idc:¶
disp-level-idc indicates a level to which the CDS conforms as specified in Annex J of [ISO.IEC.23090-29]. It corresponds to dptl_level_idc defined in [ISO.IEC.23090-29].¶
In a case of congestion, adjusting the LoD level of each V-DMC stream can help partially mitigate the congestion issue. The substreams that make up V-DMC can independently adjust their LoD (Level of Detail) levels with high level parameters (e.g, vdmc-lod). This parameter is linked to LoD-related parameters defined for each substream, allowing the overall LoD to be fine-tuned. During periods of congestion, a higher LoD level may overload transmitters and/or receivers, while also increasing network bandwidth consumption. To alleviate this, the LoD levels of individual substreams can be adjusted to reduce overall bandwidth usage and improve processing speed.¶
This document complies with, and builds over, SDP mechanisms defined in [I-D.ietf-avtcore-rtp-v3c], including the "v3cfmtp" attribute and the grouping framework "v3c" typ¶
The "v3cfmtp" SDP attribute is used to carry V3C specific media format parameters, including new media format parameters specific to V-DMC and introduced in this memo.¶
The mapping of above defined payload format media type to the corresponding fields in the Session Description Protocol (SDP) is done according to [RFC8866].¶
The media name in the "m=" line of SDP MUST be application.¶
The encoding name in the "a=rtpmap" line of SDP MUST be MPGBM¶
The clock rate in the "a=rtpmap" line MUST be 90000.¶
The OPTIONAL parameters , when present, MUST be included in the "a=fmtp" line of SDP. This is expressed as a media type string, in the form of a semicolon-separated list of parameter=value pairs.¶
The OPTIONAL parameters sprop-v3c-unit-header, sprop-v3c-unit-type, sprop-v3c-vps-id, sprop-v3c-atlas-id, sprop-v3c-attr-idx, sprop-v3c-attr-part-idx, sprop-v3c-map-idx, sprop-v3c-aux-video-flag, sprop-max-don-diff, sprop-v3c-parameter-set, v3c-ptl-level-idc, v3c-ptl-tier-flag, v3c-ptl-codec-idc, v3c-ptl-toolset-idc, v3c-ptl-rec-idc, bmesh-seq-set, bmesh-intra-codec, bmesh-inter-codec, bmesh-level-idc, bmesh-tier-flag, bmesh-codec-idc, bmesh-toolset-idc , vdmc-lod, sprop-vdmc-sm-id-pres when present, MUST be included in the "a=v3cfmtp" line of SDP. This parameter is expressed as a media type string, in the form of a semicolon-separated list of parameter=value pairs.¶
The OPTIONAL parameters, when present in the V3C base mesh component media line format parameters attribute, specify values that are valid for the coded V3C sequence until a new value is received in-band. Some OPTIONAL parameters, like sprop-v3c-parameter-set or sprop-v3c-unit-header, can't be carried in-band in the base mesh stream and may thus be considered static for the session. The carriage of V3C payload format parameters in "a=fmtp" and "a=v3cfmtp" attributes is separated by logical context, where "a=fmtp" consists of base mesh level media format parameters and "a=v3cfmtp" contains V3C level media format parameters.¶
An example of media representation corresponding to the vdmc RTP payload in SDP is as follows:¶
m=application 49170 RTP/AVP 98
a=rtpmap:98 MPGBM/90000
a=fmtp:98 sprop-vdmc-sm-id=0,1
a=v3cfmtp:sprop-v3c-unit-header=OAAAAA==;
spatial_scalability_enabled_flag=CAAAAA==
¶
The media name in the "m=" line of SDP MUST be application.¶
The encoding name in the "a=rtpmap" line of SDP MUST be VDMCDISP¶
The clock rate in the "a=rtpmap" line MUST be 90000.¶
The OPTIONAL parameters, when present, MUST be included in the "a=fmtp" line of SDP. This is expressed as a media type string, in the form of a semicolon-separated list of parameter=value pairs.¶
The OPTIONAL parameters sprop-v3c-unit-header, sprop-v3c-unit-type, sprop-v3c-vps-id, sprop-v3c-atlas-id, sprop-v3c-attr-idx, sprop-v3c-attr-part-idx, sprop-v3c-map-idx, sprop-v3c-aux-video-flag, sprop-max-don-diff, sprop-v3c-parameter-set, v3c-ptl-level-idc, v3c-ptl-tier-flag, v3c-ptl-codec-idc, v3c-ptl-toolset-idc, v3c-ptl-rec-idc, disp-seq-set, disp-codec, disp-level-idc, disp-tier-flag, disp-codec-idc, disp-toolset-idc, disp-level-idc, vdmc-lod, when present, MUST be included in the "a=v3cfmtp" line of SDP. This parameter is expressed as a media type string, in the form of a semicolon-separated list of parameter=value pairs.¶
The OPTIONAL parameters, when present in the V3C displacement component media line format parameters attribute, specify values that are valid for the coded V3C sequence until a new value is received in-band. Some OPTIONAL parameters, like sprop-v3c-parameter-set or sprop-v3c-unit-header, can't be carried in-band in the displacement stream and may thus be considered static for the session. The carriage of V3C payload format parameters in "a=fmtp" and "a=v3cfmtp" attributes is separated by logical context, where "a=fmtp" consists of displacement level media format parameters and "a=v3cfmtp" contains V3C level media format parameters.¶
An example of media representation corresponding to the vdmc RTP payload in SDP is as follows:¶
m=application 49170 RTP/AVP 98
a=rtpmap:98 VDMCDISP/90000
a=fmtp:98 sprop-vdmc-sm-id=0,1
a=v3cfmtp:sprop-v3c-unit-header=GAAAAA==;
spatial_scalability_enabled_flag=CAAAAA==
¶
The mapping of payload type parameters to SDP is described in section 9.2.1. of [I-D.ietf-avtcore-rtp-v3c] for the V3C atlas components and in section 9.2.2. of [I-D.ietf-avtcore-rtp-v3c] for other video V-DMC components.¶
The grouping framework described in section 9.3. of [I-D.ietf-avtcore-rtp-v3c] can be used for V-DMC. Group attribute with VDMC type is provided to allow application to identify "m" lines that belong to the same VDMC bitstream. Grouping type VDMC MUST be used with the group attribute. The tokens that follow are mapped to 'mid'-values of individual media lines in the SDP.¶
a=group:VDMC <tokens>¶
The following example shows an SDP including four media lines, three describing VDMC components (PT:96=Basemesh, PT:97=geometry, PT:98=attribute) and one VDMC atlas component (PT:100). All the media lines are grouped under one VDMC group. V3C parameter set is provided via session level VDMC media format parameter attribute.¶
...
a=group:vdmc 1 2 3 4
a=v3cfmtp:sprop-v3c-parameter-set=AQD/AAAP/zwAAAAAADwIAQ5BwAAOADjgQ
AADkA==
m=application 40000 RTP/AVP 96
a=rtpmap:96 MPGBM/90000
a=v3cfmtp:sprop-v3c-unit-header=OAAAAA==
a=mid:1
m=application 40002 RTP/AVP 97
a=rtpmap:97 VDMCDISP/90000
a=v3cfmtp:sprop-v3c-unit-header=GAAAAA==
a=mid:2
m=video 40004 RTP/AVP 98
a=rtpmap:98 H264/90000
a=v3cfmtp:sprop-v3c-unit-header=IAAAAA==
a=mid:3
m=application 40008 RTP/AVP 100
a=rtpmap:100 v3c/90000
a=v3cfmtp:sprop-v3c-unit-header=CAAAAA==;
a=mid:4
¶
An example offer, which allows bundling different V-DMC components (attribute, base mesh, displacement, atlas) into one stream, based on [RFC9143].¶
... a=group:BUNDLE 1 2 3 4 a=group:vdmc 1 2 3 4 m=video 40000 RTP/AVP 96 a=rtpmap:96 H264/90000 a=v3cfmtp:sprop-v3c-unit-type=4;sprop-v3c-vps-id=0; sprop-v3c-atlas-id=0 a=mid:1 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 40002 RTP/AVP 97 a=rtpmap:97 MPGBM /90000 a=v3cfmtp:sprop-v3c-unit-type=7;sprop-v3c-vps-id=0; sprop-v3c-atlas-id=0 a=mid:2 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 40004 RTP/AVP 98 a=rtpmap:98 MPGDISP /90000 a=v3cfmtp:sprop-v3c-unit-type=3;sprop-v3c-vps-id=0; sprop-v3c-atlas-id=0 a=mid:3 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 40006 RTP/AVP 99 a=rtpmap:99 v3c/90000 a=v3cfmtp:sprop-v3c-unit-type=1;sprop-v3c-vps-id=0; sprop-v3c-atlas-id=0; sprop-v3c-parameter-set=AQD/AAAP/zwAAAAAADwIAQ5BwAAOADjgQAADkA== a=mid:4 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid¶
An example answer, which accepts bundling of different V-DMC components.¶
a=group:BUNDLE 1 2 3 4 a=group:vdmc 1 2 3 4 m=video 50000 RTP/AVP 96 a=rtpmap:96 H264/90000 a=mid:1 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 0 RTP/AVP 97 a=rtpmap:97 MPGBM/90000 a=bundle-only a=mid:2 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 0 RTP/AVP 98 a=rtpmap:98 MPGDISP/90000 a=bundle-only a=mid:3 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid m=application 0 RTP/AVP 99 a=rtpmap:99 v3c/90000 a=bundle-only a=mid:4 a=extmap:1 urn:ietf:params:rtp-hdrext:sdes:mid¶
When V-DMC content is offered over RTP in a declarative style, the considerations in section 9.5. of [I-D.ietf-avtcore-rtp-v3c] are applicable.¶
New media types will be registered with IANA; see Section 7.1 and Section 7.2.¶
RTP packets using the payload format defined in this specification are subject to the security considerations discussed in the RTP specification [RFC3550], and in any applicable RTP profile such as RTP/AVP [RFC3551], RTP/AVPF [RFC4585], RTP/SAVP [RFC3711], or RTP/SAVPF [RFC5124]. However, as "Securing the RTP Protocol Framework: Why RTP Does Not Mandate a Single Media Security Solution" [RFC7202] discusses, it is not an RTP payload format's responsibility to discuss or mandate what solutions are used to meet the basic security goals like confidentiality, integrity, and source authenticity for RTP in general. This responsibility lays on anyone using RTP in an application. They can find guidance on available security mechanisms and important considerations in "Options for Securing RTP Sessions" [RFC7201]. Applications SHOULD use one or more appropriate strong security mechanisms. The rest of this Security Considerations section discusses the security impacting properties of the payload format itself.¶
Thanks to Srinivas Gudumasu and Gurdeep Bhullar for discussions and comments about this draft.¶