Composite Token Claims

3.1.1. or (Or) Claim

The "or" (Or) claim identifies one or more sets of claims of which at least one is acceptable. If every set of claims in an "or" claim would, when considered with all the other relevant claims, result in the claim set being rejected, the claim set containing the "or" claim MUST be rejected.¶

Use of this claim is OPTIONAL. The Claim Key [add key number] is used to identify this claim.¶

The "or" (OR) claim is described by the following CDDL:¶

$$Claims-Set-Claims //= ( or-claim-label => or-claim-value )
or-claim-label = TBD
or-claim-value = [ + Claims-Set ]

3.1.2. nor (Not Or) Claim

The "nor" (Nor) claim identifies one or more sets of claims of which none are acceptable. If any set of claims in a "nor" claim would, when considered with all other relevant claims, result in the claim set being accepted, the claim set containing the "nor" MUST be rejected.¶

This is the logical negation of the "or" claim.¶

Use of this claim is OPTIONAL. The Claim Key [add key number] is used to identify this claim.¶

The "nor" (NOR) claim is described by the following CDDL:¶

$$Claims-Set-Claims //= ( nor-claim-label => nor-claim-value )
nor-claim-label = TBD
nor-claim-value = [ + Claims-Set ]

3.1.3. and (And) Claim

The "and" (And) claim identifies one or more sets of claims of which all are acceptable. If any claim in an "and" claim would, when considered with all other relevant claims, result in the claim set being rejected, the claim set containing the "and" claim MUST be rejected.¶

The "and" claim is often unnecessary because a given claim set is only accepted when all its claims are acceptable. However, CBOR maps cannot have duplicate keys, so claims cannot be repeated more than once. The "and" claim is useful for claims that may be claimed multiple times, including the "or" and "nor" claims.¶

Use of this claim is OPTIONAL. The Claim Key [add key number] is used to identify this claim.¶

The "and" (AND) claim is described by the following CDDL:¶

$$Claims-Set-Claims //= ( and-claim-label => and-claim-value )
and-claim-label = TBD
and-claim-value = [ + Claims-Set ]

3.1.4. Examples

These logical claims can be used to describe more complex relationships between claims. For example, the following claim set describes a token with multiple subject claims. This token describes a situation where either of the two subjects must be true, but the issuer is not disclosing which one must be true or even whether the two subjects are genuinely different.¶

{
  /or/ TBD: [
    { /sub/ 2: "[email protected]" },
    { /sub/ 2: "[email protected]" }
  ]
}

A relying party that receives this token does not know if the bearer is George or Harriet, but it knows that the bearer is one of them.¶

The "nor" claim is useful both as a logical negation, even when only one claim is present. For example, consider the following claim set:¶

{
  /nor/ TBD: [
    { /aud/ 3: "https://example.com" }
  ]
}

This token is intended for any audience except "example.com".¶

Complex relationshops can also be described using the claims in combination. The "geohash" claim [CTA5009A] describes a geographical region. For example:¶

{
  { /aud/ 3: "https://example.com" },
  { /geohash/ 282: "9q8yy" },
  { /nor/ TBD: [
      { /geohash/ 282: ["9q8yy9", "9q8yyd"] }
    ]
  }
}

This token describes an audience of "https://example.com" and a region described by the geohash of "9q8yy" that does not include the region described by "9q8yy9" or "9q8yyd".¶

And if a very complex relationship is required, the "and" claim can be used to combine multiple claims. For example, consider the following claim set:¶

{
  /and/ TBD: [
    {
      /or/ TBD: [
        { /sub/ 2: "[email protected]" },
        { /sub/ 2: "[email protected]" }
      ]
    },
    {
      /or/ TBD: [
        { /aud/ 3: "https://example.com" },
        { /aud/ 3: "https://example.net" }
      ]
    }
  ]
}

This admittedly contrived example describes a token that is valid for either George or Harriet and is intended for either https://example.com or https://example.net. It is a bit contrived because the "aud" claim already describes a list of acceptable audiences. The use of the "and" claim is required in order to effectively repeat the "or" claim, because a single claim set cannot contain the same claim twice.¶

3.2.1. env (Enveloped) Claim

The "env" (Enveloped) claim allows an issuer to make private claims that cannot be read by a processor that does not possess the decryption key. The type of this claim is a map; the keys of the map are either claim keys (string, unsigned integer, or negative integer) or arrays of claim keys; the values of the map are COSE_Encrypt or COSE_Encrypt0 objects, as defined by Section 5 of [RFC9052]. The plaintext of the Enveloped Message is either a CBOR data item or a CBOR array of data items.¶

Each element of the map is interpreted as follows:¶

• If the key is a claim key, the plaintext of the Enveloped Message in its value is a CBOR data item that is appropriate as a value for that claim.¶
• If the key is an array of claim keys, the plaintext of the Enveloped Message in its value is an array with the cardinality equal to or larger than the array of claim keys. Each member of the array in the plaintext corresponds with the member in the array in the key with the same index. Elements of the value array with indexes that do not correspond with elements of the key array MUST be ignored. The members of the array in the plaintext are CBOR data items that are appropriate as values for the corresponding claim. The array of claim keys MUST contain at least one element.¶

These claims described in the "env" claim MAY be processed exactly as though the "env" claim were replaced with the decrypted claims, including the limitation that a map of claims is invalid if it contains a claim more than once. The "env" claim is removed from the map before looking for duplicates, so an "env" claim that contains an "env" claim may potentially be accepted. An invalid claim set MUST be rejected. A claim set that contains duplicate claims MUST be rejected, even if the duplicates are not decrypted.¶

Since claims are optionally decrypted and added as sibling claims, issuers can ensure that this occurs by adding them to the "crit" claim. In the absence of a "crit" claim, the relying party MAY choose not to decrypt the claims. Indeed, a relying party may not even have the decryption key for claims that are not relevant to its processing.¶

Use of this claim is OPTIONAL. The Claim Key [add key number] is used to identify this claim.¶

3.2.2. crit (Critical) Claim

The "crit" (Critical) claim lists the claims required to process this token.¶

The type of this claim is array and the elements of the array are strings, negative integers, or unsigned integers. The elements of the array correspond to claims that MUST be present in the token.¶

If a claim listed in the "crit" claim is present in a claim set and the processor cannot process the claim for any reason, the claim set MUST be rejected.¶

If a claim listed in the "crit" claim is not present in a claim set, the claim set MUST be rejected.¶

If a claim listed in the "crit" claim is present in a claim set as part of an "env" claim (and, should it be decrypted, be processed as a sibling of that "env" claim), if the value of the claim is not decrypted (for any reason) and processed and any possible value of the claim would result in the request being rejected, the claim set MUST be rejected. Since any processor MAY decrypt or not decrypt claim values in a "env" claim, this means a processor MAY reject any claim set that contains a claim that could have a value that would require rejection.¶

If a "crit" claim is present in a claim set, a processor SHOULD consider claims it does not understand to be acceptable if they are not present in the "crit" claim, unless application-specific processing defines otherwise. That is, when a "crit" claim is present, any claims not listed may by default be assumed to be non-critical.¶

Use of this claim is OPTIONAL. The Claim Key [add key number] is used to identify this claim.¶

3.2.3. Example

Consider a very simple token that might be passed like this:¶

{
  /iss/ 1: "https://example.com",
  /sub/ 2: "[email protected]",
  /aud/ 3: "https://example.com"
}

The identity of George is present and clear in the token. Some parties receiving this token might need to know that George is the subject. However, some may not. For example:¶

• An intermediary proxy that only needs to know that the issuer is https://example.com and the audience is https://example.com.¶
• An origin behind the proxy that needs to know that George is the subject as well, so that it can customize its response.¶

The intermediary is a relying party but does not need to know George's identity. The origin, however does. A token that permits this might look like this:¶

{
  /iss/ 1: "https://example.com",
  /aud/ 3: "https://example.com",
  /env/ TBD: {
    [/sub/ 2]: [
      h'<cose-protected-header>',
      h'<cose-unprotected-header>',
      h'<cose-ciphertext>'
    ]
  }
}

And the contents of the ciphertext might be:¶

["[email protected]", h'b73814740f877e8aa691fdab6cda']

The intermediary can process the token without decrypting the "env" claim. The origin can decrypt the "env" claim and learn that George is the subject. The issuer used additional padding in the plaintext in order to avoid disclosing the length of the subject value.¶

3.2.4. Profiling the "env" Claim

The "env" claim is only useful when the issuer can reliably expect a relying party that needs to understand the claim to be able to decrypt it. This document does not specify several important required details:¶

• How the issuer and relying party establish trust.¶
• How the issuer conveys the decryption key to the relying party.¶
• How the issuer and relying party agree on the supported ciphers.¶

These details are of necessity left to the application profile, since they will vary between applications. The "crit" claim can be used to ensure that the relying party knows which claims are encrypted and must be decrypted.¶

3.2.5. Other methods of selectively disclosing claims

The "env" claim is only suitable for protecting claims under the following circumstances:¶

• The issuer is the one that decides which claims are disclosed and to whom.¶
• The issuer can reasonably pad the plaintext to avoid revealing the length of the claim. This requires the issuer to know the maximum length of claims that might be present.¶
• The bearer does not need to control which claims are disclosed.¶
• The claim labels are not sensitive information.¶

If these are not the case, the "env" claim is not suitable. If the bearer is the one that controls selective disclosure, [draft-ietf-oauth-selective-disclosure-08] may be more appropriate. SD-JWTs also protect the claim labels, which the "env" claim does not.¶

When the claims for different audiences are significantly different, multiple encrypted tokens can be used. This is likely to lead to larger sets of tokens in general, but is a very flexible approach. This protects the entire contents of each token from all parties that do not possess the decryption key for that token.¶