Internet Engineering Task Force C.G. ChazahGroup, Ed. Internet-Draft Organization ChazahGroup Intended status: Informational 21 October 2024 Expires: 24 April 2025 SW103K PROTOCOL draft-rfcxml-rfc-swl-103k-02 Abstract What Problems Does This Protocol Solve? The SW103k protocol addresses several challenges that arise when transporting data over networks with limited bandwidth, latency constraints, and data integrity concerns. Specifically, it provides a compression and decompression mechanism designed to: Optimize Bandwidth Utilization: In environments where bandwidth is limited, such as IoT networks, satellite communications, and mobile data transfers, SW103k reduces the amount of data sent over the wire by compressing data in transit, thus saving bandwidth. Improve Data Transfer Speeds: By compressing data before transmission, the protocol reduces the volume of data that needs to be transferred, which improves transfer speeds, especially in networks where bandwidth is a bottleneck. Ensure Data Integrity: In addition to compression, SW103k integrates error- checking mechanisms that ensure data arrives intact. This helps mitigate issues in unreliable network conditions where packet loss or corruption might occur. Security Considerations: The protocol incorporates optional encryption to provide confidentiality during data transmission. This is especially useful in scenarios where sensitive data needs to be transferred, like financial transactions or health data over potentially insecure networks. How Does This Protocol Work? The SW103k protocol operates in a client-server architecture, where the sender (client) compresses the payload using a predefined compression algorithm before transmitting it to the receiver (server). The receiver then decompresses the data back into its original form. Key Components: Compression Algorithm: SW103k uses a hybrid compression algorithm combining LZ77 and Huffman encoding, ensuring efficient data compression with minimal overhead. The protocol negotiates the compression parameters (e.g., window size) at the start of each connection. Decompression Mechanism: The receiver is responsible for decompressing the data using the same parameters agreed upon during the initial handshake. The decompression process is optimized for low-latency environments to ensure the data is available with minimal delay. Transport Layer: SW103k functions over standard transport layers such as TCP or QUIC, and adds a lightweight layer that manages compression, decompression, and error-checking. The protocol header contains metadata about the compression type and error-checking mechanism used. Error Checking: ChazahGroup Expires 24 April 2025 [Page 1] Internet-Draft Abbreviated Title October 2024 SW103k includes a checksum or CRC32 in each transmission block, ensuring that data corruption can be detected and retransmitted if necessary. Comparison with Other Transport Protocols Compared to other transport protocols like TCP or QUIC, SW103k doesn’t replace them but adds an additional layer of compression and decompression to the transport process. Unlike raw TCP or QUIC, which primarily focus on connection reliability and speed, SW103k introduces bandwidth optimization through compression, which makes it particularly useful in constrained environments. Here’s how SW103k compares with other protocols: TCP: TCP provides reliable transmission, but it does not natively compress data. While you can use application-layer compression with TCP, SW103k integrates compression at the transport layer, optimizing both compression and transmission. QUIC: QUIC focuses on speed and low-latency transmissions, especially over unreliable networks. SW103k could potentially be layered on top of QUIC to introduce compression, making it useful in high-latency networks like mobile or satellite. TLS: TLS ensures security over transmission but doesn’t compress data. SW103k can work with TLS, where compressed data is first encrypted before being transmitted, adding an additional layer of bandwidth efficiency. SCTP: Like TCP, SCTP focuses on reliability, especially for message-based communications. SW103k could work with SCTP when reliability and bandwidth optimization are both critical. Why Choose SW103k Over Existing Protocols? SW103k could be chosen over existing protocols when: Bandwidth Optimization is Critical: In environments like IoT networks, satellite communications, or mobile data transfer, where bandwidth is expensive or limited, SW103k reduces the overall data transferred by compressing the payload before transmission. Minimal Processing Overhead: SW103k has been designed to offer high levels of compression with low computational overhead, making it ideal for low- power devices or systems with limited resources. Easy Integration with Existing Protocols: SW103k is designed to work alongside existing transport protocols (e.g., TCP, QUIC) without needing major architectural changes. It acts as a lightweight add-on for compression and decompression, simplifying adoption for legacy systems. Security Issues Raised by Using This Protocol Using the SW103k protocol introduces a few potential security considerations: Compression-related Attacks: Compression algorithms may be susceptible to attacks such as the CRIME or BREACH attacks, which exploit the predictable nature of compressed data. Implementing padding or randomized inputs to the compression process could help mitigate these risks. Data Integrity and Tampering: Since the protocol involves compressing and decompressing data, there's a risk that data might be tampered with during transmission. SW103k addresses this by incorporating checksum or CRC32 mechanisms to verify the integrity of each transmission block. Encryption Considerations: If sensitive data is being transmitted using SW103k, the protocol needs to ensure that the compression process doesn't ChazahGroup Expires 24 April 2025 [Page 2] Internet-Draft Abbreviated Title October 2024 leak information about the original data. It’s recommended that data be encrypted before compression or using TLS in conjunction with SW103k for secure transmissions. Denial-of-Service (DoS) Vulnerabilities: Malicious users could flood the server with decompression requests, consuming significant CPU resources. Implementing rate limiting or requiring authenticated connections before processing requests can reduce the attack surface. Concrete Examples of What is Missing When I refer to the current document not containing anything concrete, I mean that the draft lacks crucial technical details and implementation guidance that protocol implementers or reviewers need to understand the protocol’s purpose and function. For example: Detailed Algorithm: Instead of just saying “SW103k compresses data,” a concrete description would include the actual algorithm (e.g., how the hybrid of LZ77 and Huffman encoding works) and pseudocode to explain how compression and decompression happen. Message Formats: In protocols like HTTP/2 or QUIC, message formats are clearly defined. Each byte or bit has a meaning in the headers, body, and control information. SW103k should include message diagrams showing what the protocol header looks like, how metadata is transmitted, etc. State Machine or Flow Diagrams: Many transport protocols include flow diagrams showing how the protocol handles different network events (e.g., connection initiation, packet retransmission). SW103k should include this to illustrate the typical lifecycle of a connection. Code Examples: Providing actual working code that developers could use to implement SW103k would be useful. This could be a Python or C library that demonstrates how compression is performed and how the protocol interacts with the transport layer. Conclusion: Actionable Next Steps for Internet Draft To move forward with SW103k as an Internet Draft for the IETF: Develop a Detailed Specification: Include the detailed design and behavior of the protocol, including the compression algorithm, transport layer interaction, and flow control. Provide Concrete Examples: Add sample pseudocode or protocol header diagrams that illustrate how the protocol works in practice. Security Considerations: Detail the potential risks (e.g., CRIME/ BREACH attacks) and provide mitigation strategies to secure the protocol. Test Cases and Implementation: Provide a reference implementation or a set of test cases for developers to try out the protocol in different environments. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. ChazahGroup Expires 24 April 2025 [Page 3] Internet-Draft Abbreviated Title October 2024 Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 24 April 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 6 2. How it works . . . . . . . . . . . . . . . . . . . . . . . . 6 3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11 4. Security Considerations . . . . . . . . . . . . . . . . . . . 11 5. References . . . . . . . . . . . . . . . . . . . . . . . . . 11 5.1. Normative References . . . . . . . . . . . . . . . . . . 11 5.2. Informative References . . . . . . . . . . . . . . . . . 11 Appendix A. Appendix 1 . . . . . . . . . . . . . . . . . . . . . 11 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 11 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 11 ChazahGroup Expires 24 April 2025 [Page 4] Internet-Draft Abbreviated Title October 2024 1. Introduction **1. Introduction** This document defines the SWL103K protocol, which MUST be implemented by all network devices in order to ensure interoperability. **2. Protocol Features** The SWL103K protocol SHOULD support data compression for efficient data exchange in resource-constrained environments. **3. Security Considerations** Implementations of this protocol MUST NOT store plaintext passwords in memory. The rapid growth of networked devices and the emergence of diverse applications have led to the demand for efficient communication protocols that can accommodate varying network conditions, scalability, and resource constraints. The SWL103K protocol presented in this document aims to address these challenges by providing a robust and adaptable solution for data exchange in distributed networks. As network environments become increasingly dynamic and heterogeneous, traditional communication protocols may struggle to provide optimal performance. The SWL103K protocol takes a novel approach by integrating innovative techniques for data transmission, congestion control, and routing. This ensures that the protocol remains responsive and reliable, even in scenarios where network conditions may change unpredictably. This document outlines the fundamental design principles, key features, and operational characteristics of the SWL103K protocol. It describes the protocol's message format, data integrity mechanisms, and how it handles various network scenarios. By providing a comprehensive understanding of the SWL103K protocol, this document aims to enable network engineers, researchers, and implementers to make informed decisions about its adoption and integration into their respective systems. The following sections of this document delve into the specific components of the SWL103K protocol, including its requirements, design considerations, and operational guidelines. Additionally, the document provides insights into its security considerations and interactions with existing protocols. Overall, the SWL103K protocol aims to enhance the reliability, efficiency, and adaptability of communication in modern networked environments What problems does this protocol solve? This protocol solves several problems related to data transmission, compression, decompression, and integrity verification. Specifically, it aims to: Efficiently transmit and manage a large number of small data packets. Compress a batch of 103 data packets into a single compressed data stream. Decompress the compressed data back into the original 103 packets. Calculate and verify the integrity of received data using a Merkle Tree. Handle various states of the communication process, including compression and decompression. ChazahGroup Expires 24 April 2025 [Page 5] Internet-Draft Abbreviated Title October 2024 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. How it works The provided custom protocol, which appears to be a part of a larger system or application, aims to address various communication and data handling challenges. Below are responses to your questions regarding the abstract understanding of this protocol: 1. Efficiently transmit and manage a large number of small data packets. Compress a batch of 103 data packets into a single compressed data stream. Decompress the compressed data back into the original 103 packets. Calculate and verify the integrity of received data using a Merkle Tree. Handle various states of the communication process, including compression and decompression. To implement this protocol, you would need to: Define and initialize a struct sw103k_proto instance to manage the protocol's state and data. Implement the functions compressPackets and decompressPackets to handle compression and decompression of data packets. Handle various protocol states and operations in the sw103k_proto_parse_pkt function, updating the protocol instance accordingly. Implement communication logic to send and receive data packets based on the current protocol state. Implement functions for integrity verification, such as constructing a Merkle Tree and comparing hashes. Utilize this protocol in your application by calling its functions based on your specific use case. 6. Abstract: How does this protocol's function compare to other transport protocols? This protocol appears to be a custom communication and data handling protocol tailored to specific needs. Unlike widely used transport protocols like TCP or UDP, which focus on reliable data transmission or low-level data transfer, this custom protocol includes features for data compression, decompression, and integrity verification. The choice of using this protocol would depend on the specific requirements of the application. TCP, for example, ensures reliable data delivery, while UDP offers lower overhead but without guarantees of reliability. This custom protocol seems to prioritize efficient data compression and decompression, making it suitable for scenarios where data size and compression are critical factors. 7. Why might someone decide to use this instead of something else that already exists? Someone might choose to use this custom protocol over existing ChazahGroup Expires 24 April 2025 [Page 6] Internet-Draft Abbreviated Title October 2024 alternatives if their application requires: Efficient compression and decompression of data packets. Fine-grained control over data transmission and compression. Integration of integrity verification using a Merkle Tree. Customized handling of communication states and operations. Depending on the specific use case, existing transport protocols like TCP or UDP may not provide the desired level of data compression or customizability. 8. What are the security issues raised by using this protocol? While the provided code includes features for calculating and verifying packet integrity using a Merkle Tree, it's essential to consider potential security issues: Data Integrity: The protocol relies on integrity verification using a Merkle Tree, but it assumes that the root hash provided is trustworthy. Any compromise of the root hash could lead to data integrity issues. (Fixed with data integrity checks) Compression and Decompression: If not implemented securely, compression and decompression routines can potentially introduce vulnerabilities, such as buffer overflows or injection attacks. Authentication and Authorization: The protocol does not appear to address user authentication or authorization, which could be crucial for secure communication. Data Privacy: Depending on the nature of the data being transmitted, encryption may be necessary to ensure data privacy. Implementers should conduct thorough security assessments and consider encryption, authentication mechanisms, and protection against common security threats. In summary, the provided custom protocol offers a tailored solution for data transmission, compression, and integrity verification. Its use cases and advantages would depend on the specific requirements of the application it is being implemented for, but it provides flexibility and control over these aspects compared to more standardized transport protocols. Security considerations are essential when implementing and deploying this protocol in real- world applications. Below is how we are fixing the security concerns Threat Modeling: Start by conducting a threat modeling exercise. Identify potential threats and vulnerabilities in your protocol. Consider various attack vectors, such as eavesdropping, tampering, and unauthorized access. Authentication: Implement strong authentication mechanisms to ensure that communication parties can verify each other's identities. This can involve using cryptographic protocols like TLS/SSL for secure communication. Data Encryption: Encrypt sensitive data to protect it from eavesdropping. Use well- established encryption algorithms and ensure that keys are managed securely. Access Control: Enforce proper access controls to prevent unauthorized access to resources. Ensure that only authorized users or devices can interact with the protocol. Data Integrity: Implement mechanisms to verify the integrity of data during transmission. This can include using checksums, digital ChazahGroup Expires 24 April 2025 [Page 7] Internet-Draft Abbreviated Title October 2024 signatures, or HMAC (Hash-based Message Authentication Code). Secure Key Management: Properly manage cryptographic keys used for encryption and authentication. Store keys securely and rotate them periodically. Secure Coding Practices: Follow secure coding practices to avoid common vulnerabilities such as buffer overflows, injection attacks, and format string vulnerabilities. Error Handling: Implement robust error handling to prevent information leakage through error messages. Provide generic error messages to users and log detailed error information for administrators. Logging and Monitoring: Implement logging and monitoring to detect and respond to security incidents. Log relevant security events and regularly review logs for suspicious activities. Penetration Testing: Conduct penetration testing and security audits to identify vulnerabilities that may not be apparent during design and development. Regular Updates: Keep the protocol and its dependencies up to date. Security vulnerabilities can be discovered in libraries or components used by the protocol. Documentation: Provide clear and up-to-date documentation on security best practices for users and administrators of the protocol. User Education: Educate users and administrators about security best practices when using the protocol. This includes password hygiene, avoiding suspicious links or attachments, and recognizing phishing attempts. Security Review: Consider involving security experts or third- party security audits to evaluate the protocol's security posture. Compliance: Ensure that the protocol complies with relevant security standards and regulations, if applicable. Incident Response Plan: Develop an incident response plan to address security breaches or incidents. Define procedures for identifying, reporting, and mitigating security issues. * How does this protocol work? The protocol works by defining a set of states (e.g., CONNECTING, COMPRESSING, DECOMPRESSING) and operations (e.g., SEND_COMPRESSED_DATA, RECEIVE_COMPRESSED_DATA). It provides functions for compressing and decompressing data, as well as for calculating and verifying packet integrity using a Merkle Tree. First term: SW103K Definition is the name of the protocol Second term: HaviPackets Definition is the packets name on the transport layer ChazahGroup Expires 24 April 2025 [Page 8] Internet-Draft Abbreviated Title October 2024 +=========================+ | Compression Command C | +=========================+ | Decompression Command D | +-------------------------+ Table 1 file "network_app_protocol.c" #include "network_app_protocol.h" int main() { // Initialize your custom protocol and perform any necessary setup struct sw103k_proto mp; // Initialize mp and set its initial state, buffers, etc. // Example function calls sendCommand(&mp, "CONNECT"); authenticate(&mp, "networkuser", "networkpassword"); // Continuously receive and process data while (1) { custom_receive(&mp, network_socket); // Replace 'network_socket' with your actual socket or communication channel } // Clean up and exit // Close sockets, free memory, etc. return 0; } Figure 1: Source boiler code +-----------------------------------------------------+ | Custom Protocol (C Code) | +-----------------------------------------------------+ | | | +---------------------+ +----------------+ | | | Compression | | Decompression | | | | Functions | | Functions | | | +---------------------+ +----------------+ | | | | | | | | | | | ChazahGroup Expires 24 April 2025 [Page 9] Internet-Draft Abbreviated Title October 2024 | +-----v---+ +------v---+ | | | | Send | | Receive | | | | | Command | | MP4 Data | | | | | Function| | Function | | | | +---------+ +----------+ | | | | | | | | | | | | | +-----v-------------------v---------v----+ | | | Main Protocol Handling | | | | (sw103k_proto_parse_pkt) | | | +------------------------------------------+ | | | | | | | | +-----v-------------------------------+ | | | Merkle Tree | | | | Construction and Integrity | | | | Verification | | | +-----------------------------------+ | | | | | | | | +-----v----------------------------------+ | | | State Management | | | | and Custom Hash Calculations | | | +----------------------------------------+ | | | | | | | +--------v------------------------------------+ | | +--------v------------------------------------+ | File Handling | | (Sending and Receiving MP4 Data, File I/O) | +--------------------------------------------+ | | +--------v------------------------------------+ | Custom Hash Functions | | (Hash Calculation and Combination) | +--------------------------------------------+ Figure 2: Diagram ChazahGroup Expires 24 April 2025 [Page 10] Internet-Draft Abbreviated Title October 2024 3. IANA Considerations This memo includes no request to IANA. 4. Security Considerations This document should not affect the security of the Internet. 5. References 5.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . 5.2. Informative References [exampleRefMin] garith, Initials O.J., "Title", 2006. [exampleRefOrg] IEEE 802 working group, "Title LLC", 1984, . Appendix A. Appendix 1 Appendix Acknowledgements This work is supported by chazha group Contributors Thanks to chazah group ltd Author's Address Chazah (editor) Organization ChazahGroup Street City ChazahGroup Expires 24 April 2025 [Page 11] Internet-Draft Abbreviated Title October 2024 Phone: Phone Email: Email chief3@chazahgroup.org URI: URI chazahgroup.org ChazahGroup Expires 24 April 2025 [Page 12]